DOWNLOAD Panasonic TH-R42PY8SR Service Manual ↓ Size: 21.69 MB | Pages: 127 in PDF or view online for FREE

Model
TH-R42PY8SR
Pages
127
Size
21.69 MB
Type
PDF
Document
Service Manual / Other
Brand
Device
Plasma / GPH11DE CHASSIS
File
th-r42py8sr.pdf
Date

Panasonic TH-R42PY8SR Service Manual / Other ▷ View online

7
4 Specifications
Note
• Design and Specifications are subject to change without notice. Mass and Dimensions shown are approximate.
• This equipment complies with the EMC standards listed below.
EN55013, EN61000-3-2, EN61000-3-3, EN55020.
Power Source 
AC 220 - 240 V, 50/60 Hz 
Power Consumption
Average use
385 W  
Standby condition 
0.4 W (Without monitor out recording)
20 W (With monitor out recording)
Plasma Display panel
Aspect Ratio 
16:9
Visible screen size 
106 cm (diagonal)
922 mm (W) 
× 518 mm (H)
Number of pixels
2,073,600 (1,920 (W) 
× 1,080 (H)) [5,760 × 1,080 dots]
Sound
Speaker
160 mm 
× 42 mm × 2 pcs, 8 Ω
Audio Output 
20 W (10 W + 10 W), 10% THD
Headphones 
M3 (3.5 mm) stereo mini Jack 
× 1
Receiving Systems / Band name
PAL I :
UHF E21-68
(BA model)
PAL 525/60 :
Playback of NTSC tape from some PAL Video recorders (VCR)
or NTSC disc playback from DVD player and recorder.
DVB :
Digital terrestrial services via UHF aerial input.
M.NTSC :
Playback from M.NTSC Video recorders (VCR).
 NTSC (AV input only) : 
Playback from NTSC Video recorders (VCR).
(EA/PA model)
PAL B, G, H, I, SECAM B, G, SECAM L/L’ :
 VHF E2 - E12
VHF H1 - H2 (ITALY)
 VHF A - H (ITALY)
UHF E21 - E69
 CATV (S01 - S05)
CATV S1 - S10 (M1 - M10)
 CATV S11 - S20 (U1 - U10)
CATV S21 - S41 (Hyperband)
PAL D, K, SECAM D, K :
 VHF R1 - R2
VHF R3 - R5
 VHF R6 - R12
UHF E21 -E69
PAL 520/60 :
Playback of NTSC tape from some PAL Video recorders (VCR)
DVB :
Digital terrestrial services via VHF / UHF aerial input.
M.NTSC :
Playback from M. NTSC Video recorders (VCR)
NTSC (AV input only) :
Playback from NTSC Video recorders (VCR)
TV signals may not be received in some areas.
Aerial - Rear
UHF (BA model), VHF/UHF (EA/PA model)
Operating Conditions 
Temperature:
°C - 35 °C
Humidity:
20 % - 80 % RH (non-condensing) 
Connection Terminals
AV1 (Scart terminal)
21 Pin terminal (Audio/Video in, Audio/Video out, RGB in, Q-Link)
AV2 (Scart terminal)
21 Pin terminal (Audio/Video in, Audio/Video out, RGB in, S-Video in, Q-Link)
AV3
VIDEO
RCA PIN Type 
× 1 
1.0 V [p-p] (75 
Ω)
S-VIDEO
Mini DIN 4-pin 
Y:1.0 V [p-p] (75 
Ω) C:0.286 V [p-p] (75 Ω)
AUDIO L - R 
RCA PIN Type 
× 2 
0.5 V [rms]
COMPONENT
VIDEO
Y
1.0 V [p-p] (including synchronization)
P
B
, P
R
± 0.35 V [p-p]
AUDIO L - R
RCA PIN Type 
× 2
0.5 V [rms]
Others
HDMI1 / 2 
TYPE A Connectors 
This TV supports “HDAVI Control 3” function.
Output
AUDIO L - R 
RCA PIN Type 
× 2 
0.5 V [rms] (high impedance)
Dimensions (W 
× H × D)
1,048 mm 
× 727 mm × 327 mm (With Pedestal)
1,048 mm 
× 679 mm × 95 mm (TV only)
Mass
34.0 kg Net (With Pedestal)
30.0 kg Net (TV only)
8
5 Service Mode
5.1.
How to enter into Service Mode
While pressing [VOLUME ( - )] button of the main unit, press [0] button of the remote control three times within 2 seconds.
5.1.1.
Key command
 [1] button...Main items  Selection in forward direction
 [2] button...Main items  Selection in reverse direction
 [3] button...Sub items  Selection in forward direction
 [4] button...Sub items  Selection in reverse direction
 [RED] button...All Sub items  Selection in forward direction
 [GREEN] button...All Sub items  Selection in reverse direction
 [VOL] button...Value of sub items change in forward direction ( + ), in reverse direction ( - )
9
5.1.2.
Contents of adjustment mode
• Value is shown as a hexadecimal number.
• Preset value differs depending on models.
• After entering the adjustment mode, take note of the value in each item before starting adjustment.
5.1.3.
How to exit
Switch off the power with the [POWER] button on the main unit or the [POWER] button on the remote control.
10
5.2.
Service tool mode
5.2.1.
How to access
1. Select [SRV-TOOL] in Service Mode.
2. Press [OK] button on the remote control.
5.2.2.
Display of SOS History
SOS History (Number of LED blinking) indication.
From left side; Last SOS, before Last, three occurrence before, 2nd occurrence after shipment, 1st occurrence after shipment.
This indication except 2nd and 1st occurrence after shipment will be cleared by [Self-check indication and forced to factory ship-
ment setting].
5.2.3.
POWER ON TIME/COUNT
To display TIME/COUNT menu, highlight position, then press MUTE for 3sec. 
Time : Cumulative power on time, indicated hour : minute by decimal
Count : Number of ON times by decimal
Note : This indication will not be cleared by either of the self-check or any command.
5.2.4.
Exit
1. Disconnect  the AC cord from wall outlet or switch off the power with the [POWER] button on the main unit.
Page of 127
Display

Click on the first or last page to see other TH-R42PY8SR service manuals if exist.