DOWNLOAD Panasonic TH-R42PY8R Service Manual ↓ Size: 21.68 MB | Pages: 127 in PDF or view online for FREE

20

1. Remove the flexible cables (SD1, SD2, SD3 and SD4)

connected to the SD-Board.

2. Remove the flexible cable (SU11-SD11) and the bridge

connectors (SC42-SD42 and SC46-SD46).

3. Remove the screws (

×2 , 

×2 

) and remove the SD-

Board.

1. Remove the SU-Board and SD-Board. (See section 7.8.

and 7.9.)

2. Unlock the cable clampers to free the cable.
3. Disconnect the connector (SC2).
4. Disconnect the flexible cable (SC20).
5. Remove the screws (

×8 

) and remove the SC-Board.

1. Unlock the cable clampers to free the cable.
2. Disconnect the connectors (SS11, SS12, SS33, SS34

and SS35).

3. Disconnect the flexible cables (SS61, SS63, SS64 and

SS66).

4. Remove the screws (

×6 

) and remove the SS-Board.

1. Remove the Plasma panel section from the servicing

stand and lay on a fiat surface such as a table (covered)
with the Plasma panel surface facing downward.

2. Remove the Stand brackets (L, R) fastening screws (

×3

, 

×1 

 each) and remove the Stand brackets (L, R).

21

1. Remove the tuner unit. (See section 7.5.)
2. Disconnect the connectors (D3, D5 and D25).
3. Disconnect the flexible cables (D20, D31, D32 and D33).
4. Remove the screws (

×4 

) and remove the D-Board.

1. Remove the tuner unit. (See section 7.5.)
2. Remove the Stand bracket R. (See section 7.12.)
3. Remove the screws (

×3 

) and Remove the Cabinet

mount metal.

4. Remove the DD-Heat-sink holder fastening screws 

(

×16 ).

5. Remove the DD-Heat-sink (

×8).

6. Disconnect the flexible cables (CB1, CB2, CB3, CB4,

CB5, CB6, CB7 and CB8).

7. Disconnect the flexible cables (C10, C11 and C12).

8. Remove the screws (

×4 

) and remove the C1-Board.

1. Remove the tuner unit. (See section 7.5.)
2. Remove the stand bracket L. (See section 7.12.)
3. Remove the screws (

×3 

) and Remove the Cabinet

mount metal.

4. Remove the DD-Heat-sink holder fastening screws 

(

×14 ).

5. Remove the DD-Heat-sink (

×7).

6. Disconnect the flexible cables (CB9, CB10, CB11, CB12,

CB13, CB14 and CB15).

7. Disconnect the flexible cables (C20 and C21).
8. Disconnect the connectors (C23 and C25).
9. Remove the screws (

×4 

) and remove the C2-Board.

22

1. Unlock the cable clampers to free the cable.
2. Disconnect the connectors (A51). (See section 7.5.)
3. Remove the screws (

×2 , 

×2 

) and remove the

Front bracket.

1. Remove the Front bracket. (See section 7.16.)
2. Remove the screws (

×2 ).

3. Remove the screws (

×2 ).

4. Remove the Front shield case front.

5. Remove the screws (

×3 ).

6. Disconnect the connector (G51) and remove the G-

Board.

1. Disconnect the relay connectors
2. Remove the screws (

×4 

 each) and remove the

Speaker (L, R).

1. Remove the stand brackets (left, right) fastening screw

(

×1  

each).

2. Remove the cabinet assy and the plasma panel fastening

screws (

×4 , 

×6 ).

23

3. For leaving the plasma panel from the front frame, pull the

bottom of the cabinet assy forward, lift, and remove.

4. Remove the spacers and spacer rings (

×6 ).

• Please confirm the installation place of Spacer and

Spacer Ring when you exchange the Plasma Panel, and
install Spacer and Spacer Ring in an original installation
place after exchanging the Plasma Panel.

1. Remove the Cabinet assy. (See section 7.19.)
2. Disconnect the connector (S1).
3. Remove the screws (

×2 

) and remove the S-Board

metal frame.

4. Remove the screws (

×2 

) and remove the S-Board.

1. Remove the Cabinet assy. (See section 7.19.)
2. Remove the S-Board. (See section 7.20.)
3. Remove the screws (

×2 ).

4. Disconnect the connector (K1) and Remove the K-Board.