DOWNLOAD Panasonic TH-R42PV80HR Service Manual ↓ Size: 18.99 MB | Pages: 127 in PDF or view online for FREE

20

1. Remove the flexible cables (SU1B, SU2B, SU3B and

SU4B) connected to the SU-Board.

2. Remove the flexible cable (SU11-SD11) and the bridge

connector (SC41-SU41).

3. Remove the screws (

×2 , 

×2 

) and remove the SU-

Board.

1. Remove the flexible cables (SM1, SM2, SM3, SM4, SM5

and SM6).

2. Remove the bridge connector (SM41, SM42 and SM46).
3. Remove the screws (

×3 , 

×4 

) and remove the SM-

Board.

1. Remove the flexible cables (SD1B, SD2B, SD3B and

SD4B) connected to the SD-Board.

2. Remove the flexible cable (SU11-SD11) and the bridge

connectors (SC42-SD42 and SC46-SD46).

3. Remove the screws (

×2 , 

×2 

) and remove the SD-

Board.

1. Remove the SU-Board, SM-Board and SD-Board. (See

section 7.6., 7.7. and 7.8.)

2. Unlock the cable clampers to free the cable.
3. Disconnect the connector (SC2).
4. Disconnect the flexible cable (SC20).
5. Remove the screws (

×6 

) and remove the SC-Board.

21

1. Unlock the cable clampers to free the cable.
2. Disconnect the connectors (SS11, SS12, SS23 and

SS34).

3. Disconnect the flexible cables (SS53A and SS56A) (42

inch)/(SS53 and SS56) (37 inch).

4. Remove the molding prop (

×1 ).

5. Remove the screws (

×5 

) and remove the SS-Board.

1. Remove the plasma panel section from the servicing

stand and lay on a flat surface such as a table (covered)
with the plasma panel surface facing downward.

2. Remove the stand brackets (left, right) fastening screws

(

×4 

each) and remove the stand brackets (left, right).

1. Remove the tuner unit. (See section 7.4.)
2. Unlock the cable clampers to free the cable.
3. Remove the flexible cables holder fastening screws (

×8

).

4. Disconnect the flexible cables (CB1, CB2, CB3 and CB4).
5. Disconnect the flexible cables (C10 and C11).
6. Remove the screws (

×4 

) and remove the C1-Board.

22

1. Remove the tuner unit. (See section 7.4.)
2. Unlock the cable clampers to free the cable.
3. Remove the flexible cables holder fastening screws 

(

×8 ).

4. Disconnect the flexible cables (CB5, CB6, CB7 and CB8).
5. Disconnect the flexible cables (C20 and C21).
6. Disconnect the connector (C23).
7. Remove the screws (

×4 

) and remove the C2-Board.

1. Disconnect the connector (A51 and A52). (See section

7.4.)

2. Remove the screws (

×4 

) and remove the front

bracket.

1. Remove the front bracket. (See section 7.14.)
2. Remove the screws (

×2 

) and remove the front shield

front.

3. Remove the screws (

×5 

) and disconnect the connec-

tor (G51 and GS52).

4. Remove the G-Board and GS-Board.

1. Disconnect the connector (A12). (See section 7.4.)
2. Remove the screws (

×4 

each) and remove the

speaker L, R.

23

1. Remove the stand brackets. (See section 7.11.)
2. Remove the screws (

×2 ).

3. Disconnect the connector (S1).

4. Remove the screws (

×2 

) and remove the S-Board.

1. Remove the S-Board. (See section 7.17.)
2. Unlock the cable clampers to free the cable.
3. Remove the screws (

×2 ).

4. Disconnect the connectors (K1) and remove the K-Board.

1. Remove the stand brackets (left, right) fastening screw

(

×1  

each).

2. Remove the cabinet assy and the plasma panel fastening

screws (

×7 ).