Panasonic TH-85PF12W Service Manual ▷ View online
41
TH-85PF12W
4. Remove 16 screws and then remove the Cabinet Corner
stopper Metals.
5. Remove the Cabinet Corner Joint Metals and Cabinet
(left, right, upper, lower)
Note: when Cabinet is exchanged
• Paste the felts in order along each Fixed Angles (left,
right, upper, lower).
• Make sure the felts do not protrude from the edge of the
cabinet.
Note
• The felts are parts which cannot be recycled. Please use
the new article when you exchange the Cabinet.
9.32. Removal of Plasma Display
Panel
The C1 (upper, lower), C2 (upper, lower), C3 (upper,
lower),C4 (upper, lower), SS, SS2, SS3, SC, SU, SD Boards
and, flexible cables between D-C Boards and D-SC Boards,
are connected with the Plasma Display Panel for the repair.
lower),C4 (upper, lower), SS, SS2, SS3, SC, SU, SD Boards
and, flexible cables between D-C Boards and D-SC Boards,
are connected with the Plasma Display Panel for the repair.
1. Remove the Rear Covers.
(Refer to Removal of Rear Cover)
2. Disconnect the connectors (DS15, S34).
3. Disconnect 2 Relay Connectors.
3. Disconnect 2 Relay Connectors.
42
TH-85PF12W
4. Remove 1 screw ( ).
5. Remove 1 screw ( ) and then remove the Side Power
5. Remove 1 screw ( ) and then remove the Side Power
Unit.
6. Remove 16 screws and then remove Cabinet Block.
7. Pull the bottom of the Cabinet Block forward and lift.
8. Remove the Cabinet Block.
8. Remove the Cabinet Block.
9. Remove 4 screws and then remove the Cabinet Position-
ing Metals (left, right).
10. Remove 1 Eye Bolt (M12).
11. Remove 2 Eye Bolt Covers M12.
12. Remove 2 Eye Bolt Covers.
13. Remove 4 screws ( ) and then remove the Rear cover
Angle Block (center).
43
TH-85PF12W
14. Disconnect the Fan Relay Connectors.
15. Remove 16 screws and then remove the Fan Blocks (1,
2, 3, 4).
16. Disconnect the connectors (DN3, DN5, DN9).
17. Remove the flexible cables from the connectors (DN1,
17. Remove the flexible cables from the connectors (DN1,
DN2).
18. Remove 5 screws and then remove the DN-Board and
Fixed Plate.
19. Disconnect the connector (H51).
20. Remove 2 screws and then remove H5-Borad Block.
20. Remove 2 screws and then remove H5-Borad Block.
21. Disconnect the connectors (DS4, DS6).
22. Remove 3 screws and then remove the Slot Block.
22. Remove 3 screws and then remove the Slot Block.
23. Disconnect the connectors of P-Board (Main_1) (CM1,
CM2, CM3, CM4, CM5, P2).
24. Disconnect the connector of C3-Board (upper) (C35).
25. Remove 10 screws ( ) and then remove P-Board
25. Remove 10 screws ( ) and then remove P-Board
(MAIN_1).
44
TH-85PF12W
26. Disconnect the connectors of P-Board (Main_2) (CM1,
CM2, CM3, CM4, P6, P11).
27. Disconnect the connector of C2-Board (lower) (C25).
28. Remove 10 screws ( ) and then remove P-Board
28. Remove 10 screws ( ) and then remove P-Board
(MAIN_2).
29. Disconnect the connectors (P9, P25).
30. Remove 9 screws and then remove P-Board (SUB).
30. Remove 9 screws and then remove P-Board (SUB).
31. Disconnect the connector (SS21).
32. Remove the flexible cables from the connectors (D31,
32. Remove the flexible cables from the connectors (D31,
D32, D33, D34, SC20).
33. Remove 4 screws and then remove D-Board.
34. Remove 4 screws and then remove PB-Board.
35. Remove 2 screws and then remove the AC Inlet Block.
36. Remove 4 screws and then remove the Fan Box.
37. Remove 4 screws and then remove Rear Cover Connect-
ing Metal (A).
38. Exchange the Plasma Display Panel.
Click on the first or last page to see other TH-85PF12W service manuals if exist.