Panasonic TH-65PF11EK Service Manual ▷ View online
29
TH-65PF11EK
7. Disconnect the connectors (DS2, DS4, DS6, DS7, DS8,
DS15).
8. Remove 4 screws and then remove the Slot Block.
9. Remove 8 screws ( ) and then remove the Shield Plates
(A, B).
10. Remove 7 screws ( ) and then remove the Cable Hold-
ers (A, B).
11. Disconnect the connector (D25).
12. Remove the flexible cables from the connectors (C11,
C21, C22, C52, C53, C61, SC20).
13. Remove 4 screws and then remove D-Board.
14. Disconnect the connectors (P2, P9, P11, P12).
15. Remove 8 screws and then remove P(MULTI)Board,
15. Remove 8 screws and then remove P(MULTI)Board,
P(SUS)Board and Fixed Plate.
16. Remove 4 screws and then remove the Speaker Terminal
Blocks (L), (R).
17. Disconnect the connector (SS34).
18. Remove 2 screws and then remove the S1-Board Block.
18. Remove 2 screws and then remove the S1-Board Block.
30
TH-65PF11EK
19. Remove 18 screws.
20. Pull the bottom of the Plasma Display Panel forward
(arrow1).
21. Slide the Plasma Display Panel and then remove the
Plasma Display Panel (arrow2).
22. Remove 12 screws ( ) and then remove the Connection
Plates (A, B, D, E).
23. Remove 12 screws ( ) and then remove the Connection
Plates (C, F).
24. Remove the flexible cables from the connectors (SU1,
SU2, SU3, SU4, SU5, SU11, SD1, SD2, SD3, SD4, SD5).
25. Disconnect the connectors (SU41, SD42, SD46).
26. Remove 12 screws and then remove SU-Board and SD-
26. Remove 12 screws and then remove SU-Board and SD-
Board.
27. Remove 8 screws and then remove SC-Board.
31
TH-65PF11EK
28. Disconnect the connectors (SS02, SS03, C43).
29. Remove the flexible cables from the connectors (SS53,
29. Remove the flexible cables from the connectors (SS53,
SS54, SS55, SS56).
30. Remove 6 screws and then remove SS-Board.
31. Disconnect the connectors (C32, C45).
32. Remove the flexible cables from the connectors (SS51,
32. Remove the flexible cables from the connectors (SS51,
SS52, SS57, SS58).
33. Remove 10 screws and then remove SS2-Board and
SS3-Board.
34. Remove the flexible cables from the connectors (C10,
C20, C23, C33, C41, C50, C51, C60).
35. Remove 3 screws and then remove the AC-Inlet Block.
32
TH-65PF11EK
36. Remove the 4 Spacer Rings from the Plasma Display
Panel.
37. Exchange the Plasma Display Panel.
Caution:
• Please confirm the installation place of Spacer Ring
when you exchange the Plasma Display Panel, and
install them in an original installation place after
exchanging the Plasma Display Panel.
install them in an original installation place after
exchanging the Plasma Display Panel.
Click on the first or last page to see other TH-65PF11EK service manuals if exist.