DOWNLOAD Panasonic TH-65PB1E Service Manual ↓ Size: 10.53 MB | Pages: 127 in PDF or view online for FREE

29

TH-65PB1E

5. Remove the flexible cables from the connectors (CB1,

CB2, CB3) and then remove C1-Board.

1. Remove the Contact Metal (Lower).

(Refer to remove of C1-Board).

2. Remove the flexible cables from the connectors (C20,

C21, C26).

3. Remove 4 screws.
4. Remove the flexible cables from the connectors (CB4,

CB5, CB6, CB7, CB8, CB9) and then remove C2-Board.

1. Remove the Fan Block (C).

(Refer to remove of Fan).

2. Remove 6 screws and then remove the Hanger Assy L

and the Stand Pole Bracket Assy (L).

1. Remove the Contact Metal (Lower).

(Refer to remove of C1-Board).

2. Disconnect the connector (C35).
3. Remove the flexible cables from the connectors (C31,

C33, C36).

4. Remove the flexible cables from the connectors (CB10,

CB11, CB12, CB13, CB14, CB15).

5. Remove 4 screws and then remove C3-Board.

1. Remove 2 screws (B) and then remove the S1-Board

Block.

2. Disconnect the connector (S34).
3. Remove 1 screw (C) and then remove S1-Board.
4. Remove the Switch Attachment from S1-Board.

1. Remove the S1-Board Block.

(Refer to Removal of S1-Board)

2. Disconnect the connectors (A11, A22).
3. Remove 20 screws.

30

TH-65PB1E

4. Pull the bottom of the Cabinet Block forward and lift.

1. Remove 28 screws and then remove the Fixed Angle

(left, right, upper-rear, bottom-rear).

2. Remove the Front Glass.

• Firstly (1-2-3) in order.
• When attaching the Fixed Angle (upper),attach it in

downward direction.

• When attaching the Fixed Angle (left, right),attach it in

upward direction.

• Paste the Front Glass Sponges in order along each

Fixed Angles left and right, upper and bottom. 

• The sponges are parts which cannot be recycled. Please

use the new article when you exchange the Front Glass.

1. Remove 20 screws and then remove Fixed Angle (left,

right, upper-rear, bottom-rear).

2. Remove 1 screw (D).
3. Disconnect the connector (V11) and then remove V1-

Board.

4. Remove 3 hooks and then remove the Power Button and

Power Button Spring.

5. Disconnect the connector (V22) and then remove V2-

Board.

6. Remove 2 hooks and then remove the 5 Key Button from

V2-Board.

1. Remove the Front Glass.

(Refer to Removal of Front Glass)

2. Remove V1-Board and V2-Board.

(Refer to Removal of V1-Board and V2-Board)

31

TH-65PB1E

3. Remove the LED Panel and Remote Sensor Panel and

then remove the Cabinet Assy.

• The C1, C2, C3 Boards are connected with the plasma

• About the enclosed thing for line processing of the

plasma display panel for repair
Although two kinds of enclosed things for line processing are
contained in the plasma display for repair for this unit, in this
unit, please use the enclosed thing of a white tape and per-
form line processing.
(The enclosed thing of double sided tape is not used)

1. Remove the S1-Board Block.

(Refer to Removal of S1-Board)

2. Disconnect the connectors (A11, A22).
3. Remove 20 screws.

4. Pull the bottom of the Cabinet Block forward and lift.

5. Disconnect the Fan Relay Connectors.
6. Remove 7 screws and then remove the Fan Block (A),

(B) and the Fan Block (C).

7. Disconnect the connectors (DS13, P9).
8. Remove the flexible cable from the connector (DS1).
9. Remove 4 screws and then remove the Slot Block.

32

TH-65PB1E

10. Remove 3 screws and then remove the HX Sub Metal.

11. Disconnect the connectors (A16, A25).

12. Remove the flexible cable from the connector (A20, C21,

C31).

13. Remove 4 screws and then remove the A-Board Block.

14. Remove the Duct Barrier (B).

15. Remove the flexible cables from the connectors (SU1,

SU2, SU3, SU4, SU5, SU11, SD1, SD2, SD3, SD4, SD5).

16. Disconnect the connectors (SD42, SD46, SU41).
17. Remove 5 screws ( ).
18. Remove 4 screws ( ) and then remove SU-Board and

SD-Board.