Panasonic TH-50VX100U / TH-50VX100E Service Manual ▷ View online
25
TH-50VX100U / TH-50VX100E
3. Remove 2 screws and then remove SS2-Board.
8.17. Removal of C1, C2, C3-Board
8.17.1.
Removal of C1-Board
1. Remove the Slot Block.
(Refer to Removal of Slot Block).
2. Remove the Speaker Terminal Block (R).
(Refer to Removal of H3-Board (L), (R))
3. Remove 4 screws and then remove the Stand Block (R).
4. Remove 12 screws and then remove the Heat-sinks.
5. Remove the flexible cables from the connectors (C10,
C11, CB1, CB2, CB3, CB4, CB5, CB6).
6. Remove 4 screws and then remove C1-Board.
8.17.2.
Removal of C2-Board
1. Remove the Slot Block.
(Refer to Removal of Slot Block).
2. Remove 10 screws and then remove the Heat-sinks.
3. Remove the flexible cables from the connectors (C20,
C21, C22, C26, CB7, CB8, CB9, CB10, CB11).
4. Remove 4 screws and then remove C2-Board.
8.17.3.
Removal of C3-Board
1. Remove the Speaker Terminal Block (L).
(Refer to Removal of H3-Board (L), (R))
2. Remove 4 screws and then remove the Stand Block (L).
3. Remove 8 screws and then remove the Heat-sinks.
26
TH-50VX100U / TH-50VX100E
4. Disconnect the connector (C33, C35).
5. Remove the flexible cables from the connectors (C36,
5. Remove the flexible cables from the connectors (C36,
CB12, CB13, CB14, CB15).
6. Remove 4 screws and then remove C3-Board.
8.18. Removal of S1-Board
1. Remove 2 screws (L) and then remove the S1-Board
Block.
2. Disconnect the connector (S34).
3. Remove 1 screw (M) and then remove S1-Board.
3. Remove 1 screw (M) and then remove S1-Board.
8.19. Removal of Front Glass, V1,
V2-Board and Cabinet Assy
1. Remove the S1-Board Block.
(Refer to Removal of S1-Board)
2. Disconnect the connectors (DS2, DS15).
3. Remove 11 screws.
3. Remove 11 screws.
4. Pull the bottom of the Plasma Panel forward (arrow1).
5. Slide the Plasma Display Panel and then remove the
5. Slide the Plasma Display Panel and then remove the
Plasma Panel (arrow2).
8.19.1. Removal of V1-Board and V2-Board
1. Remove 2 screws and then remove the Fixed Plate.
2. Remove 2 hooks and then remove the 5 Key Button from
V2-Board.
3. Disconnect the connector (V15) and then remove V2-
Board.
4. Disconnect the connector (V2) and then remove V1-
Board.
27
TH-50VX100U / TH-50VX100E
5. Remove 1 screw (N) and then remove the Power Button
Bracket.
6. Remove 3 hooks and then remove the Power Button and
Power Button Spring.
8.19.2. Removal of Front Glass
1. Remove the Fixed Plate.
(Refer to Removal of V1-Board and V2-Board)
2. Remove 28 screws and then remove the Fixed Angles
(top, bottom, right, left).
3. Remove the Front Glass.
Note: when Front Glass is exchanged
• Paste the Sponges in order along each Fixed Angles
(top, bottom, left, right).
Note
• The sponges are parts which cannot be recycled. Please
use the new article when you exchange the Front Glass.
8.19.3. Removal of Cabinet Assy
1. Remove V1-Board, V2-Board and the Power Button
Bracket.
(Refer to Removal of V1-Board and V2-Board)
(Refer to Removal of V1-Board and V2-Board)
2. Remove the Front Glass.
(Refer to Removal of Front Glass)
3. Remove the LED Panel and Remote Sensor Panel.
4. Exchange the Cabinet Assy.
4. Exchange the Cabinet Assy.
8.20. Removal of Plasma Display
Panel
The C1,C2,C3 Boards are connected with the Plasma Dis-
play Panel for the repair.
play Panel for the repair.
1. Disconnect the Fan Relay Connectors.
2. Remove 18 screws and then remove 5 Fan Blocks (1, 2,
2. Remove 18 screws and then remove 5 Fan Blocks (1, 2,
3, 4, 5).
3. Disconnect the connectors (DN3, DN5).
4. Remove the flexible cables from the connectors (DN1,
4. Remove the flexible cables from the connectors (DN1,
DN2).
5. Remove 4 screws and then remove the DN-Board Block.
28
TH-50VX100U / TH-50VX100E
6. Disconnect the connectors (DS2, DS4, DS6, DS7, DS8,
DS15).
7. Remove 4 screws and then remove the Slot Block.
8. Disconnect the connector (D25).
9. Remove the flexible cables from the connectors (C11,
9. Remove the flexible cables from the connectors (C11,
C21, C22, D20).
10. Remove 4 screws and then remove D-Board.
11. Disconnect the connectors (P2, P9, P11, P12).
12. Remove 12 screws and then remove P-Board (MAIN)
with Fixed Plate and P-Board (AC).
13. Remove 8 screws ( ) and then remove the Stand Block
(L), (R).
14. Remove 2 screws ( ) and then remove the Speaker Ter-
minal Block (L), (R).
15. Remove the flexible cables from the connectors (SU1,
SU2, SU3, SU4, SU5, SU11, SD1, SD2, SD3, SD4, SD5).
16. Disconnect the connectors (SU41, SD42, SD46).
17. Remove 8 screws and then remove SU-Board and SD-
17. Remove 8 screws and then remove SU-Board and SD-
Board.
Click on the first or last page to see other TH-50VX100U / TH-50VX100E service manuals if exist.