DOWNLOAD Panasonic TH-50PY80P / TH-50PZ80B / TH-50PZ80E Service Manual ↓ Size: 18.02 MB | Pages: 127 in PDF or view online for FREE

Model
TH-50PY80P TH-50PZ80B TH-50PZ80E
Pages
127
Size
18.02 MB
Type
PDF
Document
Service Manual
Brand
Device
Plasma / GPF11DE CHASSIS
File
th-50py80p-th-50pz80b-th-50pz80e.pdf
Date
PREV: Panasonic TH-50PY800P / TH-50PZ800B / TH-50PZ800E Service Manual

Panasonic TH-50PY80P / TH-50PZ80B / TH-50PZ80E Service Manual ▷ View online

21
7.9.
Remove the SU-Board
1. Remove the flexible cables (SU1, SU2, SU3, SU4 and
SU5) connected to the SU-Board.
2. Remove the flexible cable (SU11-SD11) and the bridge
connector (SC41-SU41).
3. Remove the molding prop (
×1 ).
4. Remove the screws (
×2 , 
×2 
) and remove the SU-
Board.
7.10. Remove the SD-Board
1. Remove the flexible cables (SD1, SD2, SD3, SD4 and
SD5) connected to the SD-Board.
2. Remove the flexible cable (SU11-SD11) and the bridge
connectors (SC42-SD42 and SC46-SD46).
3. Remove the molding prop (
×1 ).
4. Remove the screws (
×2 , 
×2 
) and remove the SD-
Board.
7.11. Remove the SC-Board
1. Remove the SU-Board and SD-Board. (See section 7.9.
and 7.10.)
2. Unlock the cable clampers to free the cable.
3. Disconnect the connector (SC2).
4. Disconnect the flexible cable (SC20).
5. Remove the screws (
×8 
) and remove the SC-Board.
7.12. Remove the SS-Board
1. Unlock the cable clampers to free the cable.
2. Disconnect the connectors (SS11, SS12, SS24, SS33,
SS34  and SS35).
3. Disconnect the flexible cables (SS53, SS55 and SS56).
4. Remove the screws (
×6 
) and remove the SS-Board.
22
7.13. Remove the SS2-Board
1. Disconnect the connector (SS24) and disconnect the flex-
ible cable (SS58).
2. Remove the screws (
×2 
) and remove the SS2-Board. 
7.14. Remove the Stand brackets
1. Remove the Plasma panel section from the servicing
stand and lay on a fiat surface such as a table (covered)
with the Plasma panel surface facing downward.
2. Remove the Stand brackets (L, R) fastening screws 
(
×5 
 each) and remove the Stand brackets (L, R).
7.15. Remove the D-Board
1. Remove the A-Board unit. (See section 7.7.)
2. Disconnect the connectors (D3, D5 and D25).
3. Disconnect the flexible cables (D20, D31, D32 and D33).
4. Remove the screws (
×4 
) and remove the D-Board.
7.16. Remove the C1-Board
1. Remove the A-Board unit. (See section 7.7.)
2. Remove the Stand bracket R. (See section 7.14.)
3. Remove the DD-Heat-sink fastening screws (
×12 ).
4. Remove the DD-Heat-sink (
×6).
5. Disconnect the flexible cables (CB1, CB2, CB3, CB4,
CB5 and CB6).
6. Disconnect the flexible cables (C10 and C11).
7. Remove the screws (
×5 
) and remove the C1-Board.
23
7.17. Remove the C2-Board
1. Remove the A-Board unit. (See section 7.7.)
2. Remove the stand bracket L. (See section 7.14.)
3. Remove the DD-Heat-sink fastening screws (
×10 ).
4. Remove the DD-Heat-sink (
×5).
5. Disconnect the flexible cables (CB7, CB8, CB9, CB10
and CB11).
6. Disconnect the flexible cables (C20, C21, C22 and C26).
7. Remove the screws (
×5 
) and remove the C2-Board.
7.18. Remove the C3-Board
1. Remove the DD-Heat-sink fastening screws (
×8 ).
2. Remove the DD-Heat-sink (
×4).
3. Disconnect the flexible cables (CB12, CB13, CB14 and
CB15).
4. Disconnect the flexible cable (C36).
5. Disconnect the connectors (C33 and C35).
6. Remove the screws (
×4 
) and remove the C3-Board.
7.19. Remove the Front bracket
1. Unlock the cable clampers to free the cable.
2. Disconnect the connectors (A11, A51 and A52). (See sec-
tion 7.7.)
3. Remove the screws (
×2 , 
×2 
) and remove the
Front bracket.
7.20. Remove the G-Board, GS-
Board and GH-Board
1. Remove the Front bracket. (See section 7.19.)
2. Remove the screws (
×2 ).
3. Remove the screws (
×3 ).
4. Remove the Front shield case front.
5. Disconnect the connectors (GH11 and GS52). 
6. Remove the screws (
×2 ).
24
7. Remove the Front shield top.
8. Remove the GH-Board. 
9. Remove the screws (
×2 
) and remove the GS-Board.
10. Remove the screws (
×3 ).
11. Disconnect the connector (G51) and remove the G-
Board.
7.21. Remove the Speakers
1. Disconnect the relay connectors
2. Remove the screws (
×4 
 each) and remove the
Speaker (L, R).
7.22. Remove the Plasma panel sec-
tion from the Cabinet assy
(glass)
1. Remove the stand brackets (left, right) fastening screw
(
×1  
each).
2. Remove the cabinet assy and the plasma panel fastening
screws (
×8 , 
×6 ).
3. For leaving the plasma panel from the front frame, pull the
bottom of the cabinet assy forward, lift, and remove.
4. Remove the spacers and spacer rings (
×6 ).
Page of 127
Display

Click on the first or last page to see other TH-50PY80P / TH-50PZ80B / TH-50PZ80E service manuals if exist.

RANDOM: