Panasonic TH-50PV600E / TH-50PX600B Service Manual ▷ View online
3. Disconnect the coupler (DG2).
4. Disconnect the flexible cables (DG1, DG15 and DG20).
5. Remove the screw (×1
) remove the DG-Board.
6.11. Remove the TA-Board
1. Disconnect the tuner cable.
2. Remove the screw (×1
) and remove the TA-Board.
6.12. Remove the H-Board
1. Remove the TA-Board. (See section 6.11.)
2. Unlock the cable clampers to free the cable.
3. Disconnect the couplers (H2, H40 and H51).
4. Disconnect the flexible cable (H1).
5. Remove the screws (×5
) and remove the H-Board.
6.13. Remove the HC-Board
1. Disconnect the flexible cable (HC15).
2. Remove the screws (×2
) and remove the HC-Board.
13
TH-50PV600E / TH-50PX600B
6.14. Remove the D-Board
1. Remove the tuner unit. (See section 6.8.)
2. Disconnect the couplers (D5, D20 and D25).
3. Disconnect the flexible cables (D3, D31, D32, D33 and
D34).
4. Remove the screws (×4
) and remove the D-Board.
6.15. Remove the SU-Board
1. Remove the screws (×3
).
2. Remove the flexible cables (SU1, SU2, SU3 and SU4) and
remove the bridge connector (SU45).
3. Slide the SU-Board to the left to disconnect from a coupler
(SC41-SU41) on the SC-Board and remove the SU-Board.
6.16. Remove the SD-Board
1. Remove the screws (×3
).
2. Remove the flexible cables (SD1, SD2, SD3 and SD4) and
remove the bridge connector (SD46).
3. Slide the SD-Board to the left to disconnect from a coupler
(SC42-SD42) on the SC-Board and remove the SD-Board.
6.17. Remove the SC-Board
1. Unlock the cable clampers to free the cable.
2. Disconnect the couplers (SC2, SC20 and SC23).
3. Remove the screws (×9
) and remove the SC-Board.
14
TH-50PV600E / TH-50PX600B
6.18. Remove the SS2-Board
1. Disconnect the coupler (SS23) and disconnect the flexible
cable (SS55).
2. Remove the screws (×2
) and remove the SS2-Board.
6.19. Remove the SS3-Board
1. Disconnect the coupler (SS22) and disconnect the flexible
cable (SS56).
2. Remove the screws (×2
) and remove the SS3-Board.
6.20. Remove the SS-Board
1. Remove the SS2-Board and SS3-Board. (See section 6.18.
and 6.19)
2. Disconnect the couplers (SS11, SS12, SS33, SS43 and
SS44).
3. Disconnect the flexible cables (SS51, SS52, SS53 and
SS54).
4. Remove the screws (×7
) and remove the SS-Board.
6.21. Remove the C1-Board
1. Remove the flexible cables holder fastening screws (×6
).
2. Disconnect the flexible cables (CA1, CA2 and CA3).
3. Disconnect the flexible cable (C10).
4. Remove the screws (×5
) and remove the C1-Board.
15
TH-50PV600E / TH-50PX600B
6.22. Remove the C2-Board
1. Remove the flexible cables holder fastening screws (×8
).
2. Disconnect the flexible cables (CA4, CA5, CA6 and CA7).
3. Disconnect the flexible cables (C20, C21 and C22).
4. Remove the screws (×5
) and remove the C2-Board.
6.23. Remove the C3-Board
1. Remove the flexible cables holder fastening screws (×8
).
2. Disconnect the flexible cables (CA8, CA9, CA10 and
CA11).
3. Disconnect the flexible cables (C31 and C32).
4. Disconnect the coupler (C33).
5. Remove the screws (×5
) and remove the C3-Board.
6.24. Remove the stand brackets
1. Remove the plasma panel section from the servicing stand
and lay on a fiat surface such as a table (covered) with the
plasma panel surface facing downward.
plasma panel surface facing downward.
2. Remove the stand brackets (left, right) fastening screws (×6
each) and remove the stand brackets (left, right).
6.25. Remove the C4-Board
1. Remove the stand bracket (left). (See section 6.24.)
2. Remove the flexible cables holder fastening screws (×8
).
3. Disconnect the flexible cables (CB8, CB9, CB10 and
CB11).
4. Disconnect the flexible cables (C41 and C42).
5. Disconnect the couplers (C43 and C44).
6. Remove the screws (×5
) and remove the C4-Board.
16
TH-50PV600E / TH-50PX600B
Click on the first or last page to see other TH-50PV600E / TH-50PX600B service manuals if exist.