DOWNLOAD Panasonic TH-50PF20E / TH-50PF20ER Service Manual ↓ Size: 14.36 MB | Pages: 127 in PDF or view online for FREE

25

TH-50PF20E / TH-50PF20ER

3. Disconnect the connectors (SU41, SD42, SD46).
4. Remove 3 screws ( ).
5. Remove 4 screws ( ) and then remove SU-Board and

SD-Board.

• Screw on 2 screws (1) firstly.

1. Disconnect the connectors (SC2, SU41, SD42, SD46).
2. Remove the flexible cable from the connector (SC20).
3. Remove 7 screws ( ).
4. Remove 4 screws ( ) and then remove SC-Board.

1. Disconnect the connectors (A8, A9, A10, A11, A13, A22,

A25, A35, PB32, PB33, PB34).

2. Remove the flexible cables from the connectors (A1, A20,

A31, A32).

3. Remove 3 screws ( ).
4. Remove 2 screws ( ) and then remove the A-Board

Block.

• Put the flexible Cable between the Fixed Metal and A-

Board when Connect the flexible Cable to the connector
(A1).

5. Disconnect the connectors (SS11, SS24, SS33).
6. Remove the flexible cables from the connectors (SS53,

SS56).

7. Remove 6 screws and then remove SS-Board.

26

TH-50PF20E / TH-50PF20ER

1. Remove the A-Board Block.

(Refer to remove of SS-Board).

2. Disconnect the connector (SS24).
3. Remove the flexible cables from the connector (SS58).
4. Remove 2 screws and then remove SS-Board.

1. Remove the Speaker Terminal Block.

(Refer to remove of Speaker Terminal Block).

2. Disconnect the connectors (SD42, SD46).
3. Remove the flexible cable from the connector (SD11).
4. Remove 2 screws ( ).
5. Remove 2 screws ( ) and then turn over SD-Board to the

left.
Note:

Do not damage the Flexible Cables of SD-Board, and 
the parts on SC-Board.

• Screw on 1 screw (1) firstly.

6. Remove the flexible cable from the connector (C10).
7. Remove 8 screws ( ) and then remove the flexible

cables from the connectors (CB1, CB2, CB3, CB4).

8. Remove 4 screws ( ) and then remove C1-Board.

1. Remove the Fan Block.

(Refer to remove of Fan).

2. Remove the Slot Block.

(Refer to remove of Slot Block).

3. Remove 5 screws and then remove the Hanger Assy R

and the Stand Pole Bracket Assy (R).

4. Remove the flexible cables from the connectors (C20,

C21, C26).

5. Remove 8 screws ( ) and then remove the flexible

cables from the connectors (CB5, CB6, CB7, CB8).

6. Remove 4 screws ( ) and then remove C2-Board.

27

TH-50PF20E / TH-50PF20ER

1. Remove the Fan Block.

(Refer to remove of Fan).

2. Remove the Slot Block.

(Refer to remove of Slot Block).

3. Remove the A-Board Block.

(Refer to remove of SS-Board).

4. Remove 5 screws and then remove the Hanger Assy L

and the Stand Pole Bracket Assy (L).

5. Disconnect the connectors (C33, C35).
6. Remove the flexible cables from the connectors (C31,

C36).

7. Remove 14 screws ( ) and then remove the flexible

cables from the connectors (CB9, CB10, CB11, CB12,
CB13, CB14, CB15).

8. Remove 5 screws ( ) and then remove C3-Board.

1. Remove 2 screws (B) and then remove the S1-Board

Block.

2. Disconnect the connector (S35).
3. Remove 1 screw (C) and then remove S1-Board.

1. Remove the Speaker Terminal Block.

(Refer to remove of Speaker Terminal Block).

2. Remove the S1-Board Block.

(Refer to Removal of S1-Board)

3. Disconnect the connectors (A11, A22).
4. Remove 4 screws ( ) and then remove the Handle Fixing

Metal (L, R).

5. Remove 5 screws ( ).

• Screw on 2 screws (1) firstly.

6. Pull the bottom of the Plasma Display Panel forward

(arrow1).

7. Slide the Plasma Display Panel and then remove the

Plasma Display Panel (arrow2).

28

TH-50PF20E / TH-50PF20ER

Please use the Aluminum Tapes when you exchange the Front
Glass or the Cabinet Assy.
Paste the Aluminum Tapes to original position.

1. Remove 24 screws ( ) and 1 screw ( ) and then remove

the Fixed Angle (left, right, upper-rear, bottom-rear).

2. Remove the Front Glass.

• Firstly screw on 6 screws (1-2) in order.

• Paste the Front Glass Sponges in order along each

Fixed Angles left and right, upper and bottom. 

• The sponges are parts which cannot be recycled. Please

use the new article when you exchange the Front Glass.

1. Remove the Front Glass.

(Refer to remove of Front Glass).

2. Remove the Fixed Angle (bottom-front).