Panasonic TH-42PZ70B / TH-42PZ70E / TH-42PY70F / TH-42PY70P Service Manual ▷ View online
3. Remove the flexible cables holder fastening screws (×16
).
4. Disconnect the flexible cables (CB1, CB2, CB3, CB4, CB5,
CB6, CB7 and CB8).
5. Disconnect the flexible cables (C40, C41 and C42).
6. Remove the screws (×5
6. Remove the screws (×5
) and remove the C4-Board.
6.22. Remove the speaker L, R
1. Disconnect the relay connector .
2. Remove the screws (×4
2. Remove the screws (×4
each) and remove the speaker
holder.
3. Remove the speaker L, R.
6.23. Remove the Plasma panel
section from the Cabinet assy
(glass)
(glass)
1. Remove the stand brackets (left, right) fastening screw (×1
each).
2. Remove the cabinet assy and the plasma panel fastening
screws (×11
).
3. For leaving the plasma panel from the cabinet assy, pull the
bottom of the front frame forward, lift, and remove.
6.24. Remove the K-Board and the
S-Board
1. Remove the cabinet assy. (See section 6.23.)
2. Remove the screws (×13
2. Remove the screws (×13
) and remove the glass holder
bottom.
3. Unlock the cable clampers to free the cable.
4. Remove the screws (×2
4. Remove the screws (×2
) and remove the front P.C.B.
metal.
17
TH-42PZ70B / TH-42PZ70E / TH-42PY70F / TH-42PY70P
5. Remove the screws (×2
).
6. Disconnect the connector (S1) and Remove the S-Board.
7. Remove the screws (×2
).
8. Disconnect the connectors (K1) and remove the K-Board.
6.25. Replace the plasma panel
(finished)
1. Place the new plasma panel (finished) on the flat surface of
the table (covered by a soft cloth), with the plasma panel
surface facing downward.
surface facing downward.
2. Attach the C1, C2, C3-Board and the C4-Board, connect
the flexible cables (×30) from the Plasma panel to the C1,
C2, C3-Board and the C4-Board, and fit the flexible cable
holders.
C2, C3-Board and the C4-Board, and fit the flexible cable
holders.
3. Attach the Hooks (left, right) and fit the Reinforcement
Angles (L, R) and the Connection Plate (A, B, C, D) to the
new plasma panel.
new plasma panel.
4. Place the plasma panel section on the servicing stand.
5. Attach the cabinet assy and each P.C.Board and so on, to
5. Attach the cabinet assy and each P.C.Board and so on, to
the new plasma panel.
* When fitting the cabinet assy, be careful not to allow
any debris, dust or handling residue to remain between
the front glass and plasma panel.
* When fitting the cabinet assy, be careful not to allow
any debris, dust or handling residue to remain between
the front glass and plasma panel.
18
TH-42PZ70B / TH-42PZ70E / TH-42PY70F / TH-42PY70P
7 Caution statement
7.1. Caution statement.
Caution:
Please confirm that all flexible cables are assembled correctly.
Also make sure that they are locked in the connectors.
Verify by giving the flexible cables a very slight pull.
Also make sure that they are locked in the connectors.
Verify by giving the flexible cables a very slight pull.
19
TH-42PZ70B / TH-42PZ70E / TH-42PY70F / TH-42PY70P
8 Location of Lead Wiring
8.1. Lead of Wiring (1)
20
TH-42PZ70B / TH-42PZ70E / TH-42PY70F / TH-42PY70P
Click on the first or last page to see other TH-42PZ70B / TH-42PZ70E / TH-42PY70F / TH-42PY70P service manuals if exist.