Panasonic TH-42PF11EK Service Manual ▷ View online
25
TH-42PF11EK
2. Remove the flexible cables from the connectors (C10,
C11, C12, CB1, CB2, CB3, CB4, CB5, CB6, CB7, CB8).
3. Remove 4 screws and then remove C1-Board.
8.16.2.
Removal of C2-Board
1. Remove 14 screws and then remove the Heat-sinks.
2. Disconnect the connectors (C23, C25).
3. Remove the flexible cables from the connectors (C20,
3. Remove the flexible cables from the connectors (C20,
C21, CB9, CB10, CB11, CB12, CB13, CB14, CB15).
4. Remove 4 screws and then remove C2-Board.
8.17. Removal of S1-Board
1. Remove 2 screws (L) and then remove the S1-Board
Block.
2. Disconnect the connector (S34).
3. Remove 1 screw (M) and then remove S1-Board.
3. Remove 1 screw (M) and then remove S1-Board.
26
TH-42PF11EK
8.18. Removal of Front Glass, V1,
V2-Board and Cabinet
1. Remove the S1-Board Block.
(Refer to Removal of S1-Board)
2. Disconnect the connectors (DS2, DS15).
3. Remove 4 screws ( ) and then remove the Fixed Plate
3. Remove 4 screws ( ) and then remove the Fixed Plate
(L, R).
4. Remove 10 screws ( ).
5. Pull the bottom of the Plasma Display Panel forward
(arrow1).
6. Slide the Plasma Display Panel and then remove the
Plasma Display Panel (arrow2).
8.18.1. Removal of Front Glass
1. Remove 23 screws and then remove the Fixed Angle
(top, bottom, right, left).
2. Remove the Front Glass.
Note: when Front Glass is exchanged
• Paste the Front Glass Cushons in order along each
Fixed Angles top and bottom, left and right.
Note
• The Front Glass Cushons are parts which cannot be
recycled. Please use the new article when you exchange
the Front Glass.
the Front Glass.
8.18.2. Removal of V1-Board and V2-Board
1. Remove 12 screws and then remove the Fixed Angle
(bottom, right).
27
TH-42PF11EK
2. Remove 1 screw (N).
3. Disconnect the connector (V2) and then remove V1-
3. Disconnect the connector (V2) and then remove V1-
Board.
4. Remove 2 hooks and then remove the 5 Key Button from
V2-Board.
5. Disconnect the connector (V15) and then remove V2-
Board.
6. Remove 3 hooks and then remove the Power Button and
Power Button Spring.
8.18.3. Removal of Cabinet Assy
1. Remove the Front Glass.
(Refer to Removal of Front Glass)
2. Remove V1-Board and V2-Board.
(Refer to Removal of V1-Board and V2-Board)
3. Remove the LED Panel and Remote Sensor Panel.
4. Remove the Cabinet Assy.
4. Remove the Cabinet Assy.
8.19. Removal of Plasma Display
Panel
The C1,C2 Boards are connected with the Plasma Display
Panel for the repair.
Panel for the repair.
1. Disconnect the Fan Relay Connectors.
2. Remove 14 screws and then remove 4 Fan Blocks (1, 2,
2. Remove 14 screws and then remove 4 Fan Blocks (1, 2,
3, 4).
3. Disconnect the connectors (DN3, DN5).
4. Remove the flexible cables from the connectors (DN1,
4. Remove the flexible cables from the connectors (DN1,
DN2).
5. Remove 4 screws and then remove the DN-Board Block.
6. Disconnect the connectors (DS2, DS4, DS6, DS7, DS8,
DS15).
7. Remove 4 screws and then remove the Slot Block.
28
TH-42PF11EK
8. Disconnect the connector (D25).
9. Remove the flexible cables from the connectors (C11,
9. Remove the flexible cables from the connectors (C11,
C12, C21, D20).
10. Remove 4 screws and then remove D-Board.
11. Disconnect the connectors (P2, P9, P11, P12).
12. Remove 6 screws ( ) and then remove P-Board and
Fixed Plate.
13. Remove 6 screws ( ) and then remove the Speaker Ter-
minal Block (L, R).
14. Remove 6 screws ( ) and then remove the Stand Block
(L, R).
15. Remove the flexible cables from the connectors (SU1,
SU2, SU3, SU4, SU11, SD1, SD2, SD3, SD4).
16. Disconnect the connectors (SU41, SD42, SD46).
17. Remove 8 screws and then remove SU-Board and SD-
17. Remove 8 screws and then remove SU-Board and SD-
Board.
18. Remove 8 screws and then remove SC-Board.
Click on the first or last page to see other TH-42PF11EK service manuals if exist.