Panasonic TH-42PD50U Service Manual ▷ View online
6.15. Remove the SS-Board
1. Disconnect the couplers (SS11, SS12, SS23 and SS34).
2. Disconnect the flexible cables (SS41, SS42, SS43 and
2. Disconnect the flexible cables (SS41, SS42, SS43 and
SS44).
3. Remove the screws (×6
) and remove the SS-Board.
6.16. Remove the C1-Board
1. Remove the flexible cables holder fastening screws (×6
).
2. Disconnect the flexible cables (CB1, CB2 and CB3).
3. Disconnect the flexible cable (C11).
4. Disconnect the coupler (C12).
5. Remove the screws (×3
3. Disconnect the flexible cable (C11).
4. Disconnect the coupler (C12).
5. Remove the screws (×3
) and remove the C1-Board.
6.17. Remove the C2-Board
1. Remove the flexible cables holder fastening screws (×8
).
2. Disconnect the flexible cables (CB4, CB5, CB6 and CB7).
3. Disconnect the flexible cable (C21).
4. Disconnect the couplers (C22 and C23).
5. Remove the screws (×3
3. Disconnect the flexible cable (C21).
4. Disconnect the couplers (C22 and C23).
5. Remove the screws (×3
) and slide the C2-Board to the
left and remove the C2-Board.
13
TH-42PD50U
6.18. Remove the K-Board
1. Unlock the cable clampers to free the cable.
2. Disconnect the couplers (H7 and SS34).
3. Remove the screws (×3
2. Disconnect the couplers (H7 and SS34).
3. Remove the screws (×3
) and remove the K-Board.
6.19. Remove the S-Board
1. Remove the screw (×2
) and remove the S-Board unit.
2. Unlock the cable clampers to free the cable.
3. Disconnect the couplers (S1 and S2).
4. Remove the screws (×2
3. Disconnect the couplers (S1 and S2).
4. Remove the screws (×2
) and remove the S-Board.
6.20. Remove the Speaker L, R
1. Remove the screw (×8
) and remove the Speaker L, R.
14
TH-42PD50U
6.21. Remove the Plasma panel
section from the Front frame
(glass)
(glass)
1. Remove the front frame and the plasma panel fastening
screw (×8
).
2. Remove the front frame and the stand brackets fastening
screw (×6
).
3. For leaving the plasma panel from the front frame, pull the
bottom of the front frame forward, lift, and remove.
6.22. Replace the plasma panel
(finished).
1. Place the new plasma panel (finished) on the flat surface of
the table (covered by a soft cloth), with the plasma panel
surface facing downward.
surface facing downward.
2. Attach the C1-Board and the C2-Board, connect the flexible
cables (×7) from the Plasma panel to the C1-Board and C2-
Board, and fix the flexible cable holders.
Board, and fix the flexible cable holders.
3. Attach the Hooks (left, right) and fit the stand brackets (left,
right) to the new plasma panel.
4. Place the plasma panel section on the servicing stand.
5. Attach the front frame and the each P.C.Board and so on,
5. Attach the front frame and the each P.C.Board and so on,
to the new plasma panel.
* When fitting the front frame, be careful not to allow
any debris, dust or handling residues to remain
between the front glass and plasma panel.
* When fitting the front frame, be careful not to allow
any debris, dust or handling residues to remain
between the front glass and plasma panel.
15
TH-42PD50U
7 Location of Lead Wiring
7.1. Lead of Wiring (1)
16
TH-42PD50U
Click on the first or last page to see other TH-42PD50U service manuals if exist.