Panasonic TH-37PV600E / TH-37PV600B / TH-42PV600E / TH-42PV600B Service Manual ▷ View online
6.25. Remove the S-Board
1. Disconnect the coupler (S1).
2. Remove the screws (×2
2. Remove the screws (×2
) and remove the S-Board metal
frame.
3. Remove the screws (×2
) and remove the S-Board.
6.26. Remove the stand brackets
1. Remove the plasma panel section from the servicing stand
and lay on a fiat surface such as a table (covered) with the
plasma panel surface facing downward.
plasma panel surface facing downward.
2. Remove the stand brackets (left, right) fastening screws (×5
each) and remove the stand brackets (left, right).
6.27. Remove the GS-Board and SD-
Module
1. Remove the stand bracket R. (See section 6.26.)
2. Unlock the cable clampers to free the cable.
3. Disconnect the coupler (G52).
4. Remove the screws (×3
2. Unlock the cable clampers to free the cable.
3. Disconnect the coupler (G52).
4. Remove the screws (×3
).
5. Remove the SD card unit.
6. Remove the screws (×3
) and remove the SD card unit
cover.
17
TH-37PV600E / TH-37PX600B / TH-42PV600E / TH-42PX600B
7. Disconnect the flexible cable (GS12).
8. Remove the screw (×1
8. Remove the screw (×1
).
9. Remove the GS-Board and SD-Module.
6.28. Remove the Plasma panel
section from the Front frame
(glass)
(glass)
1. Remove the plasma panel section from the servicing stand
and lay on a fiat surface such as a table (convered) with the
plasma panel surface facing download.
plasma panel surface facing download.
2. Remove the stand brackets (left, right) fastening screws (×2
each).
3. Replace the servicing stand and stand the set.
4. Remove the front frame and the plasma panel fastening
4. Remove the front frame and the plasma panel fastening
screws (×12
).
5. For leaving the plasma panel from the front frame, pull the
bottom of the front frame forward, lift, and remove.
18
TH-37PV600E / TH-37PX600B / TH-42PV600E / TH-42PX600B
6.29. Remove the squawker speaker
1. Remove the front frame. (See section 6.28.)
2. Remove the screws (×12
2. Remove the screws (×12
).
3. Remove the glass holder R and L.
4. Remove the screws (×2
).
5. Remove the squawker speaker.
6.30. Remove the K-Board
1. Remove the front frame. (See section 6.28.)
2. Remove the glass holder R and L. (See section 6.29.)
3. Remove the screws (×3
2. Remove the glass holder R and L. (See section 6.29.)
3. Remove the screws (×3
)
4. Remove the bottom shield.
5. Remove the screws (×5
5. Remove the screws (×5
)
6. Remove the glass holder bottom R and L.
7. Remove the screws (×9
7. Remove the screws (×9
)
8. Remove the glass holder bottom.
9. Remove the screws (×2
).
10. Disconnect the couplers (K1).
11. Remove the K-board.
11. Remove the K-board.
19
TH-37PV600E / TH-37PX600B / TH-42PV600E / TH-42PX600B
6.31. Replace the plasma panel
(finished)
1. Place the new plasma panel (finished) on the flat surface of
the table (covered by a soft cloth), with the plasma panel
surface facing downward.
surface facing downward.
2. Attach the C1-Board and the C2-Board, connect the flexible
cables (×8) from the Plasma panel to the C1-Board and the
C2-Board, and fit the flexible cable holders.
C2-Board, and fit the flexible cable holders.
3. Attach the Hooks (left, right) and fit the stand brackets (L,
R) to the new plasma panel.
4. Place the plasma panel section on the servicing stand.
5. Attach the front frame and each P.C.Board and so on, to
5. Attach the front frame and each P.C.Board and so on, to
the new plasma panel.
* When fitting the front frame, be careful to allow any
debris, dust or handling residue to remain between the
front glass and plasma panel.
* When fitting the front frame, be careful to allow any
debris, dust or handling residue to remain between the
front glass and plasma panel.
20
TH-37PV600E / TH-37PX600B / TH-42PV600E / TH-42PX600B
Click on the first or last page to see other TH-37PV600E / TH-37PV600B / TH-42PV600E / TH-42PV600B service manuals if exist.