DOWNLOAD Panasonic TH-37PR11EH Service Manual ↓ Size: 20.26 MB | Pages: 127 in PDF or view online for FREE

21

TH-37PR11EH

4. Remove 6 screws and then remove SC-Board.

1. Disconnect the connectors (SS11, SS12, SS23, SS34).
2. Remove the Flexible Cables from the connectors (SS53,

SS56) 

3. Remove 5 screws and then remove SS-Board.

1. Remove the Slot Block.

(Refer to Removal of Slot Block)

2. Remove 2 screws ( ) and then remove the Ferrite Core

from the Stand Block (L, R).

3. Remove 12 screws ( ) and then remove the Stand Block

(L, R).

1. Remove the Flexible Cables from the connectors (C10,

C11).

2. Remove 8 screws ( ) and then remove the Flexible

Cables from the connectors (CB1, CB2, CB3, CB4). 

3. Remove 4 screws ( ) and then remove C1-Board.

1. Remove 3 screws and then remove the AC-Inlet Block.

2. Disconnect the connector (C23).
3. Remove the Flexible Cables from the connectors (C20,

C21).

4. Remove 8 screws ( ) and then remove the Flexible

Cables from the connectors (CB5, CB6, CB7, CB8). 

5. Remove 4 screws ( ) and then remove C2-Board.

1. Disconnect the connector (S1).
2. Remove 1 screw and then remove the Ground wire from

the S-Board Block.

3. Remove 1 screw (A) and then remove the S-Board Block.

22

TH-37PR11EH

4. Remove 2 screws (B) and then remove S-Board.

1. Remove 2 screws (C) and then remove the Plate (A).
2. Remove 2 screws (D).
3. Disconnect the connector (GK3) and then remove GK-

Board.

1. Remove 2 screws.
2. Remove K-Board and disconnect the connector(K1).

1. Disconnect the Relay connectors (DS2, DS8, DS15).
2. Disconnect the connector (K1).
3. Disconnect the connector (S1).
4. Remove 1 screw ( ) from the S-Board Block. 

5. Remove 1 screw ( ) and then remove the Ferrite Core

from the Stand Block (L).

6. Connected terminal hook is pushed, and the speaker lead

in 4 places is pulled out.

7. Remove 1 screw ( ) and then remove the Ferrite Core

from the Stand Block (R).

8. Remove 10 screws ( ).

23

TH-37PR11EH

9. Remove 3 Ferrite Core.

10. Lift up the bottom of Plasma Panel to the arrow1 direc-

tion. 

11. Pull the Plasma Panel to the arrow2 direction and then 

remove the Plasma Panel.

12. Remove the S-Board Block.

(Refer to Removal of S-Board)

13. Remove K-Board.

(Refer to Removal of K-Board)

14. Remove GK-Board.

(Refer to Removal of GK-Board)

15. Remove 5 screws (F) and then remove the Plate (B).
16. Remove 2 screws (G) and then remove the Control

Panel.

17. Remove 1 screw (H) and then remove the Spring.
18. Remove 3 hooks and then remove the Door.

19. Remove 4 hooks and then remove the Power SW.

20. Remove screws and then remove the Glass Fixed Plate

(L, R, Upper, Lower).
Removed number of screws:

12 screws (L, R) ( )
5 screws (Upper) ( )
6 screws (Lower) ( )

21. Remove the Front Glass.
22. Remove 2 screws ( ) and then remove the Plate (L, R).
23. Remove 8 screws ( ) and then remove the Speaker (L,

R).

24

TH-37PR11EH

1. Remove the Cabinet.

(Refer to Removal of Cabinet and Speaker (L, R))
Note: when Front Glass is exchanged

• Along each fixed Angles of an top and bottom, right and

left order and the sponge for the Front Glass is pasted to
the Front Glass. 

• The sponges are parts which cannot be recycled. Please

use the new article when you exchange the Front Glass.

1. Remove 3 screws ( ) and then remove the Ferrite Core

from the Stand Block (L, R) and Plasma Panel.

2. Remove 12 screws ( ) and then remove the Stand Block

(L, R).

3. Disconnect the connectors (DS4, DS6, DS7).
4. Remove the Flexible Cables from the connectors (DS1,

DS3).

5. Disconnect the Relay Connectors (DS2, DS8, DS15).

6. Remove 5 screws and then remove the Slot Block.

7. Disconnect the connector (DN5).
8. Remove 4 screws and then remove DN-Board Block.

9. Disconnect the connectors (P2, P9, P11, P12, P25).

10. Remove 10 screws ( ) and then remove P-Board.

11. Remove 3 screws ( ) and then remove the AC-Inlet

Block.

12. Remove the Flexible Cables from the connectors (C11,

C21, SC20).