Panasonic TH-152UX1 / TH-152UX1W / TH-152UX1C Service Manual ▷ View online
8
TH-152UX1 / TH-152UX1W / TH-152UX1C
GPF13UX chassis series have special function and operation setting facility called Option Menu. This Option Menu is use-
ful for special function required customers. This should be set at the installation stage.
ful for special function required customers. This should be set at the installation stage.
Note:
When both main unit buttons and remote control are disabled due to the [Button lock], [Remocon User level] adjustments, set
all the values [Off] so that all the buttons are enabled again.
Press the [Down] button on main unit together with [Return] button on the remote control and hold for more than 5 seconds. The
all the values [Off] so that all the buttons are enabled again.
Press the [Down] button on main unit together with [Return] button on the remote control and hold for more than 5 seconds. The
[Shipping] menu is displayed and the lock is released when it disappears.
Option Menu for GPF13UX series
Option menus
default setting
Contents
Onscreen display
On
Enable/Disable to display input mode indication after power on and no signal
indication.
indication.
Initial input
Off
Adjusts the input signal when the unit is turned on.
Input lock
Off
Locks the input switch operation.
Button lock
Off
Enable/Disable the operation of the buttons on right side of the main unit.
Remocon User level
Off
Enable/Disable the operation of the buttons on remote control.
Off-timer function
Enable
Enable/Disable Off-timer operation.
Aspect Mode
Mode1
Select the suitable aspect mode.
Auto Setup
Manual
Sets the operational mode of the automatic position adjustment in the POS./
SIZE memu.
SIZE memu.
Studio mode
Off
Switching functions in setting menus used for television studio applications.
Function button assign 1
3D settings
Set the function to operate when the FUNCTION button 1 to 4 on the remote
control is pressed.
control is pressed.
Function button assign 2
Scrolling bar
Function button assign 3
Test patterns
Function button assign 4
Blue only
H-Position
0
When the input signal is a 4k2k signal, adjust the horizontal position.
V-Position
0
When the input signal is a 4k2k signal, adjust the vertical position.
3D Safety Precautions
On
Set show/hide 3D Safety Precautions during power ON.
9
TH-152UX1 / TH-152UX1W / TH-152UX1C
3.7.
Applicable signals
10
TH-152UX1 / TH-152UX1W / TH-152UX1C
4 Specifications
Power Source
200-240 V AC, 50/60Hz
Power Consumption
Power on
3700W
Stand-by condition
0.5 W
Power off condition
0.3 W
Plasma Display panel
Drive method : AC type
152-inch, 17:9 aspect ratio
152-inch, 17:9 aspect ratio
Screen size
134.4 inch (3,416 mm) (W) x 70.9 inch (1,801 mm) (H) x 152.0 inch(3,862 mm) (diagonal)
(No. of pixels)
8,847,360 (4,096 (W) x 2,160 (H))
[4,096 x 2,160 x 3 dots]
[4,096 x 2,160 x 3 dots]
Operating condition
Temperature
32
°F - 95 °F (0 °C - 35 °C)
Humidity
20 % - 80 %
Applicable signals
Scanning format
525 (480) / 60i 60p, 625 (575) / 50i 50p, 750 (720) / 60p 50p, 1125 (1080) /
60i 60p 50i 50p 24p 25p 30p 24sF, 1250 (1080) / 50i
60i 60p 50i 50p 24p 25p 30p 24sF, 1250 (1080) / 50i
PC signals
VGA, SVGA, XGA, SXGA
UXGA ..... (compressed)
Horizontal scanning frequency 15 - 110 kHz
Vertical scanning frequency 48 - 120 Hz
UXGA ..... (compressed)
Horizontal scanning frequency 15 - 110 kHz
Vertical scanning frequency 48 - 120 Hz
Connection terminals
AV IN
HDMI 1/2 TYPE A Connector x 2
HDMI (Version 1.4 with 3D)
SDI IN
*1
BNC
HD-SDI (Dual Link) x 4, 4K signal input
HD-SDI (Dual Link) x 4, 4K signal input
0.8 Vp-p (75-ohm)
DVI-D IN
*1
DVI-D (Single Link) 24 Pin x 4, 4K signal input
Compliance with DVI Revision 1.0
PC IN
High-Density Mini D-sub 15 Pin
G with sync 1.0 Vp-p (75-ohm)
G without sync 0.7 Vp-p (75-ohm)
B: 0.7 Vp-p (75-ohm)
R: 0.7 Vp-p (75-ohm)
HD/VD: 1.0 - 5.0 Vp-p (high impedance)
G without sync 0.7 Vp-p (75-ohm)
B: 0.7 Vp-p (75-ohm)
R: 0.7 Vp-p (75-ohm)
HD/VD: 1.0 - 5.0 Vp-p (high impedance)
VBS (use HD port)
with picture 1.0 Vp-p (high impedance)
without picture 0.3 Vp-p (high impedance)
without picture 0.3 Vp-p (high impedance)
SERIAL
External Control Terminal
D-sub 9 Pin
D-sub 9 Pin
RS-232C compatible
3D SHUTTER OUT
*2
M3 jack x 1, for 3D active shutter eyewear
SLOT
DVI-D IN DVI-D 24 Pin
Content Protection
Audio Input is not available
Audio Input is not available
Compliance with DVI Revision 1.0
Compatible with HDCP 1.1
Compatible with HDCP 1.1
Accessories Supplied
Remote Control
Transmitter
Transmitter
N2QAYB000560 (UX1, UX1W) , N2QAYB000561 (UX1C)
Batteries
R6(AA)Size x 2
Fixing band
TMME203 x 3
Dimensions (W
× H × D)
141.8 inch x 78.0 inch x 5.8 inch
*3
/ 3,600 mm x 1,980 mm x 147 mm
*3
Mass (weight)
approx. 1,272.1 lbs / 577 kg net
*1 4 inputs is set and only for one 4k2k signal. You can not input 4 different signal to each inputs.
*2 An optional 3D IR TRANSMITTER is required for viewing 3D images.
*3 10.3 inch / 260 mm when including protruding portion of terminals
*2 An optional 3D IR TRANSMITTER is required for viewing 3D images.
*3 10.3 inch / 260 mm when including protruding portion of terminals
Note:
• Design and specifications are subject to change without notice. Mass and dimensions shown are approximate.
• This equipment complies with the EMC standards listed below.
• This equipment complies with the EMC standards listed below.
EN55022, EN55024, EN61000-3-11, EN61000-3-12.
11
TH-152UX1 / TH-152UX1W / TH-152UX1C
5 Location
Click on the first or last page to see other TH-152UX1 / TH-152UX1W / TH-152UX1C service manuals if exist.