Panasonic TH-103PF10WK / TH-103PF10TK / TH-103PF10RK Service Manual ▷ View online
TH-103PF10WK/TK/RK
9
TH-103PF10WK/TK/RK
10
4 Specifications
Power Source (WK/RK)
220 V - 240V AC, 50 / 60Hz
Power Source (TK)
220 V - 240 V AC, 50 / 60Hz (single phase)
Power Consumption
Power on
1,500 W
Stand-by condition
Save OFF 1.0 W, Save ON 0.9 W
Power off condition
0.5 W
Plasma Display panel
Drive method: AC type 103-inch, 16:9 aspect ratio
Screen size
2,269 mm (W)
× 1,277 mm (H) × 2,604 mm (diagonal)
(No. of pixels)
2,073,600 (1,920 (W)
× 1,080 (H)) [5,760 × 1,080 dots]
Operating condition
Temperature
0
°C - 40 °C
Humidity
20 % - 80 %
Applicable signals
Scanning format
525 (480) / 60i 60p, 625 (575) / 50i 50p, 750 (720) / 60p 50p, 1125 (1080) /
60i 60p 50i 50p 24p 25p 30p 24sF,1250 (1080) / 50i
PC signals
VGA, SVGA, XGA, SXGA,
UXGA ..... (compressed)
Horizontal scanning frequency 15 - 110 kHz
Vertical scanning frequency 48 - 120 Hz
UXGA ..... (compressed)
Horizontal scanning frequency 15 - 110 kHz
Vertical scanning frequency 48 - 120 Hz
Connection terminals
HDMI A-B
TYPE A Connector x 2
COMPONENT / RGB IN
Y / G (BNC)
with sync 1.0 Vp-p (75-ohm)
P
B
/ B (BNC), P
R
/ R (BNC)
0.7 Vp-p (75-ohm)
AUDIO IN (RCA PIN JACK
× 2)
0.5 Vrms (high impedance)
PC IN
(HIGH-DENSITY Mini D-SUB 15PIN)
Y or G with sync 1.0 Vp-p (75-ohm)
Y or G without sync 0.7 Vp-p (75-ohm)
Y or G without sync 0.7 Vp-p (75-ohm)
B / P
B
/ C
B
: 0.7 Vp-p (75-ohm)
R / P
R
/ C
R
: 0.7 Vp-p (75-ohm)
HD / VD: 1.0 - 5.0 Vp-p (high impedance)
AUDIO IN (M3 JACK)
0.5 Vrms (high impedance)
SERIAL
EXTERNAL CONTROL TERMINAL (D-SUB 9PIN)
RS-232C COMPATIBLE
AUDIO OUT
RCA PIN JACK
× 2 (L / R)
OUTPUT LEVEL : VARIABLE (-
- 0 dB)
[INPUT 1 kHz / 0 dB, 10 k-ohm Load]
Accessories Supplied
Remote Control Transmitter
EUR7636070R
Batteries
R6 Size x 2
Fixing bands
TMME203
× 2
Dimensions (W
× H × D)
2,414 mm
× 1,421 mm × 129 mm (141 mm when including protruding portion of slots)
Mass (weight)
approx. 220.0 kg net
Notes:
• Design and specifications are subject to change without notice. Mass and dimensions shown are approximate.
• This equipment complies with standards. AS/NZS60065, CISPRE22 Class-B (TH-103PF10WK)
• This equipment complies with standards. AS/NZS60065, CISPRE22 Class-B (TH-103PF10WK)
TH-103PF10WK/TK/RK
11
5 Service Mode
5.1.
CAT (Computer Aided Test) mode
To exit the CAT mode, access the ID mode and switch off the main power.
5.1.1.
IIC mode
Select the IIC mode by Up / Down button on the remote control at the front page of CAT mode and then press the Action button
on the remote control.
on the remote control.
Subject and item are mentioned on “IIC mode structure”.
To exit the IIC mode, press the R button on the remote control.
TH-103PF10WK/TK/RK
12
5.1.2.
CD mode
Select the CD mode by Up / Down button on the remote control at the front page of CAT mode and then press the Mute button on
the remote control more than 3 seconds.
the remote control more than 3 seconds.
Microcomputer software version (IC4002), this version can be upgrade by
1. replace of new version IC
2. Loading the new version software from loader tool, TZSC07036.
2. Loading the new version software from loader tool, TZSC07036.
Memory data change
To exit the CD mode, press the R button on the remote control.
5.1.3.
SD mode
Select the SD mode by Up / Down button on the remote control at the front page of CAT mode and then press the Action button
on the remote control.
on the remote control.
To exit the SD mode, press the R button on the remote control.
Click on the first or last page to see other TH-103PF10WK / TH-103PF10TK / TH-103PF10RK service manuals if exist.