Panasonic TH-103PB1E Service Manual ▷ View online
33
TH-103PB1E
8.5.
Removal of A-Board
• The important matter after A-Board exchange
Since a touch pen setup is come by [OFF] when A-Board is
exchanged, please set to [ON].
exchanged, please set to [ON].
• Check that no bright points appears by Ve Life adjust-
ment after both A and D board exchange.
1. Remove the Slot Metal Top.
(Refer to Removal of HX-Board)
2. Disconnect the connector (A5, A7, A11, A13, A16, A17).
3. Remove the flexible cables from the connectors (A1,
3. Remove the flexible cables from the connectors (A1,
A15).
4. Remove 4 screws and then remove A-Board.
8.6.
Removal of D-Board
Check that no bright points appears by Ve Life adjustment
after both A and D board exchange.
after both A and D board exchange.
1. Disconnect the connectors (D21, D25).
2. Remove the flexible cables from the connectors (D15,
2. Remove the flexible cables from the connectors (D15,
D20, D31, D32, D33, D34).
3. Remove 4 screws and then remove D-Board.
8.7.
Removal of P-Board (MAIN_1)
1. Disconnect the connectors (CM1, CM2, CM3, CM4, CM5,
P2, P6, P35).
2. Remove 10 screws and then remove P-Board (MAIN_1).
8.8.
Removal of P-Board (MAIN_2)
1. Disconnect the connectors (CM1, CM2, CM3, CM4, P6,
P11, P35).
34
TH-103PB1E
2. Remove 10 screws and then remove P-Board (MAIN_2).
8.9.
Removal of P-Board (SUB)
1. Disconnect the connectors (CS1, CS2, CS3, CS4, CS5,
CS6, CS7, CS8, CS9, P7, P9, P25, P34).
2. Remove 9 screws and then remove P-Board (SUB).
8.10. Removal of S1-Board and V2-
Board
1. Remove 2 screws and then slide the Side Power Unit
upward.
2. Remove the Side Power Unit.
8.10.1. Removal of S1-Board
1. Remove 2 screws (A) and then remove the Power Button
Bracket.
2. Remove 1 screw (B).
3. Disconnect the connector (S34) and then remove S1-
3. Disconnect the connector (S34) and then remove S1-
Board.
4. Remove 2 hooks and then remove the Power Button and
Power Button Spring.
8.10.2. Removal of V2-Board
1. Remove 4 screws (C) and then remove the Side Power
Cover.
2. Disconnect the connector (V22) and then remove V2-
Board.
35
TH-103PB1E
3. Remove 2 hooks and then remove the 5 Range Button
from V2-Board.
8.11. Removal of SU-Board
1. Disconnect the Fan Joint Connectors.
2. Remove 7 screws ( ).
3. Remove 2 screws ( ).
2. Remove 7 screws ( ).
3. Remove 2 screws ( ).
4. Remove 1 screw ( ) and then remove the Fan Blocks (1,
2).
5. Remove 1 screw ( ).
6. Remove 4 screws ( ).
7. Remove 2 screws ( ) and then remove the Side Hold
6. Remove 4 screws ( ).
7. Remove 2 screws ( ) and then remove the Side Hold
Unit.
8. Remove the flexible cables from the connectors (SU1,
SU2, SU3, SU4, SU11).
9. Disconnect the connector (SU43).
10. Remove 5 screws ( ).
36
TH-103PB1E
11. Remove 3 screws ( ) and then remove SU-Board.
8.12. Removal of SM-Board
1. Disconnect the Fan Joint Connectors.
2. Remove 6 screws ( ).
3. Remove 1 screw ( ) and then remove the Fan Block (1).
2. Remove 6 screws ( ).
3. Remove 1 screw ( ) and then remove the Fan Block (1).
4. Remove the flexible cables from the connectors (SM1,
SM2, SM3, SM4, SM11, SM12).
5. Disconnect the connectors (SM41, SM42, SM46).
6. Remove 6 screws ( ).
7. Remove 4 screws ( ) and then remove SM-Board.
6. Remove 6 screws ( ).
7. Remove 4 screws ( ) and then remove SM-Board.
8.13. Removal of SD-Board
1. Remove the Fan Block (1).
(Refer to Removal of SM-Board)
2. Remove the Side Power Unit.
(Refer to Removal of S1-Board and V2-Board)
3. Remove 2 screws ( ).
Click on the first or last page to see other TH-103PB1E service manuals if exist.