DOWNLOAD Panasonic CF-R1N62CVGR Service Manual ↓ Size: 3.48 MB | Pages: 41 in PDF or view online for FREE

30

Preparation: perform the section 6.2.1. to 6.2.3. first.
1. Pull off the pad heat spleader.
2. Remove the HDD FPC ass’y from the connector (CN14).

3. Remove the HDD damper.
4. Remove the HDD FPC ass’y

Preparation: perform the section 6.2.1. to 6.2.5. first.
1. Remove the 2 screws (G).

Screw (G): DFHE5025XA

2. Remove the FFC from the connector (CN13), and then

remove the PCMCIA slot.

3. Remove the jack ESD sheet, pad heat spleader and RJ dust

cover.

4. Tear off the kapton tape, and then remove the main board.

31

Preparation: perform the section 6.2.1. to 6.2.3. first.
1. Remove the 2 screws (H), and then remove the pad cabinet.

Screw (H): DXHM0040ZA

2. Remove the touch pad from the pad cabinet.
3. Remove the FFC (PAD).

Preparation: perform the section 6.2.1 first.
1. Remove the 6 screws (I), and then remove the edge covers

(L) and (R).
Screw (I): DFHE5025XA

Preparation: perform the section 6.2.1. to 6.2.4. and 6.2.8. first.
1. Remove the 4 screws (J), and then remove the hinges (L)

and (R).
Screw (J): DXQT26+D4FZL

Preparation: perform the section 6.2.1. to 6.2.4. , 6.2.8. and 6.2.9.
first.
1. Remove the 9 latches, and then remove the LCD front ass’y.

32

Preparation: perform the section 6.2.1. to 6.2.4. , and 6.2.8. to
6.2.10. first.
1. Lift the LCD upward, and then lay aside after turn over.
2. Remove the LCD cable from the LCD unit.
3. Remove the back light cable from the inverter board, and then

remove the LCD unit.

Preparation: perform the section 6.2.1. to 6.2.4. , and 6.2.8. to
6.2.11. first.
1. Remove the back light cable and LCD cable from the inverter

board.

2. Tear off the kapton tape, and then remove the inverter board.

Preparation: perform the section 6.2.1. to 6.2.4. , and 6.2.8. to
6.2.11. first.
1. Remove the wiring of back light cable from the LCD cable

sheet, and then remove the LCD cable sheet.

2. Tear off the reflector tape, and then remove the back light.