DOWNLOAD Panasonic CF-52CCABVN1 Service Manual ↓ Size: 2.01 MB | Pages: 12 in PDF or view online for FREE

Model
CF-52CCABVN1
Pages
12
Size
2.01 MB
Type
PDF
Document
Simplified Service Manual
Brand
Device
PC / NOTEBOOK COMPUTER
File
cf-52ccabvn1.pdf
Date

Panasonic CF-52CCABVN1 Simplified Service Manual ▷ View online

ORDER NO.
CPD0809204AE
Notebook Computer
CF-52CCABVN1
Model No.
This is the Service Manual for
the following areas.
1 …for Russia
This apparatus must be earthed for your safety.
To ensure safe operation the three-pin plug must be inserted only into a standard three-pin power point
which is effectively earthed through the normal household wiring.
Extension cords used with the equipment must be three-core and be correctly wired to provide connec-
tion to earth. Wrongly wired extension cords are a major cause of fatalities.
The fact that the equipment operates satisfactorily does not imply that the  power point is earthed and
that the installation is completely safe.
For your safety, if you have any doubt about the effective earthing of the power point, consult a quali-
fied electrician.
FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY
This appliance is supplied with a moulded three pin mains plug for your safety and convenience.
A 3 amp fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 3 amps and
that it is approved by ASTA or BSI to BS 1362.
Check for the ASTA mark 
 or the BSI mark 
 on the body of the fuse.
If the plug contains a removable fuse cover you must ensure that it is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used until a replacement cover is obtained.
A replacement fuse cover can be purchased from your local Panasonic Dealer.
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET IN YOUR
HOME THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND DISPOSED
OF SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED
INTO ANY 13 AMP SOCKET.
If a new plug is to be fitted please observe the wiring code as shown below.
If in any doubt please consult a qualified electrician.
Warning: THIS APPLIANCE MUST BE EARTHED.
Important
The wires in this mains lead are coloured in accordance with the following code:
Green-and-yellow:
Earth
Blue:
Neutral
Brown:
Live
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured
markings identifying the terminals in your plug, proceed as follows:
The wire which is coloured GREEN-and-YELLOW must be connected to the terminal in the plug
which is marked by the letter E or by the safety earth symbol 
 coloured GREEN or GREEN-and-
YELLOW.
The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or
coloured BLACK.
The wire which is coloured Brown must be connected to the terminal which is marked with the letter L
or coloured RED.
The mains plug on this equipment must be used to disconnect the mains power.
Please ensure that a socket outlet is available near the equipment and shall be easily accessible.
How to replace the fuse
Open the fuse compartment with a screw-
driver and replace the fuse.
Warnings
This equipment is not designed for connection to an IT power system.
(An IT system is a system having no direct connections between live parts and Earth; the exposed-conducive-
parts of the electrical installation are earthed.
An IT system is not permitted where the computer is directly connected to public supply systems in the U.K.)
Disconnect the mains plug from the supply socket when  the computer is not in use.
This equipment is produced to BS800/1983.
For U.K.
WARNING
2 / 12
LASER SAFETY INFORMATION
For U.S.A
.
Class 1 LASER-Product
This product is certified to comply with DHHS Rules 21 CFR Subchapter J.
This product complies with European Standard EN60825 (or IEC Publication 825)
For all areas
This equipment is classified as a class 1 level LASER product and there is no hazardous LASER radiation.
Caution:
(1) Use of controls or adjustments or performance of procedures other than those specified herein
 may result in hazardous radiation exposure.
(2) The drive is designed to be incorporated into a computer-based system or unit which has
 an enclosing cover. It should never be used as a stand alone drive.
Danger:
The serviceman should not remove the cover of drive unit and should not service because
 the drive unit is a nonserviceable part.
Please check DANGER label on PD-drive unit.
 • Unplug the AC power cord to the equipment before opening the top cover of the drive.
When the power switch it on, do not place your eyes close to the front panel door to look into the interior
   
of the unit.
LASER Specification
Class 1 level LASER Product
Wave Length: DVD 658±8 nm
CD
775~815 nm
Laser safety information is appropriate only when drive with laser is installed.
3 / 12
Vorsicht!
Explosionsgefahr bei unsachgemäßem Austausch der Batterie.  Ersatz nur durch denselben order einen vom
Hersteller empfohlenen ähnlichen Typ.  Entsorgung gebrauchter Batterien nach Angaben des Herstellers.
 LITHIUMBATTERIES
ATTENTION: IL Y A DANGER D'EXPLOSION S' IL Y A REMPLACEMENT INCORRECT DE LA PILE.
REMPLACER UNIQUEMENT AVEC UNE PILE DU MÈME TYPE OU D'UN TYPE RECOMMANDÉ PAR LE
CONSTRUCTEUR.  METTRE AU RÉBUT  LES PILES USAGÉES CONFORMÉMENT AUX INSTRUCTIONS DU
FABRICANT.
 PILE AU LITHIUM
 LITHIUM BATTERY
SAFETY PRECAUTIONS
 
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type 
battery 
recommended by the manufacture
r
.
 
Dispose of 
used batteries according to the manufacturer's instructions.
1.  Before servicing, unplug the power cord to prevent an electric shock.
2.  When replacing parts, use only manufacture's recommended components
     for safety.
3.  Check the condition of the power cord. Replace if wear or damage is evident.
4.  After servicing, be sure to restore the lead dress, insulation barriers, 
     insulation papers, shields, etc.
 
 
LITHIUM BATTERY
   
This computer contains a lithium battery to enable the date, time, and other  
   
data to be stored. The battery should only be exchanged by authorized
   
service personel.
    Warning!  A risk of explosion from incorrect installation or misapplication may
   
possibly occur.
 
 
When using your telephone equipment, basic safety precautions should always be followed to reduce the risk 
of fire, electric shock and injury to persons, including the following: 
1.  Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a 
wet basement or near a swimming pool. 
Avoid using a telephone (other than a cordless type) during an electrical storm.  
2. 
There may be a remote risk of electric shock from lightning. 
3.  Do not use the telephone to report a gas leak in the vicinity of the leak. 
vicinity of the leak.
4.  Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. 
They may explode. Check with local codes for possible special disposal instructions. 
SAVE THESE INSTRUCTIONS
Important Safety Instructions 
4 / 12
Page of 12
Display

Panasonic CF-52CCABVN1 Simplified Service Manual ▷ Download

  • DOWNLOAD Panasonic CF-52CCABVN1 Service Manual ↓ Size: 2.01 MB | Pages: 12 in PDF or view online for FREE
  • Here you can View online or download the Simplified Service Manual for the Panasonic CF-52CCABVN1 in PDF for free, which will help you to disassemble, recover, fix and repair Panasonic CF-52CCABVN1 PC. Information contained in Panasonic CF-52CCABVN1 Simplified Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.