Panasonic KX-TGP500B09 / KX-TPA50B09 (serv.man2) Service Manual ▷ View online
48
KX-TGP500B09/KX-TPA50B09
4-1. Teraterm will be activated automatically if disconnect and reconnect a PC and the base unit by a USB cable.
4-2. Select "Serial port" from "Setup" menu.
4-2. Select "Serial port" from "Setup" menu.
• Change the settings of "Serial port setup" as follows. Then click OK.
4-3. Select "Save setup" from "Setup" menu and overwrite TERATERM.INI.
Note:
• Once you install USB driver and test mode application, it is unnecessary to do it again.
8.5.2.
How to Start USB Test Mode
Be sure to install the application for test mode before starting. See How to Install the Application for Test Mode (P.44).
<Enter>
1. After PC Setting (P.46), enter “ts ” on the window of “Tera term”.
2. “TEST” is returned. This state shows Test mode.
2. “TEST” is returned. This state shows Test mode.
<Exit>
1. Enter “z ” to finish Test mode.
Note:
• If disconnecting USB cable at Test mode state and connecting it to the unit again, “ts” command needs to be entered before
inputting any commands.
• : Enter key.
(1)
Select "Serial port" from "Setup" menu.
(2)
Select your port number.
(Refer to "
3-1.Confirm the
USB port number")
(3) Set these items like this.
(4) Click "OK".
Click on the first or last page to see other KX-TGP500B09 / KX-TPA50B09 (serv.man2) service manuals if exist.