Panasonic KX-TDA6381X / KX-TDA6381SX (serv.man2) Service Manual / Supplement ▷ View online
ORDER NO. KMS1509379SE
16-Port Analogue Trunk Card w/o CID
Model No.
KX-TDA6381X
KX-TDA6381SX
KX-TDA6381SX
(for Europe, Asia, Oceania, Middle Near East, Latin
America, India and Africa)
TABLE OF CONTENTS
PAGE
1 CHANGES----------------------------------------------------------- 2
1.1. Replacement Parts List ---------------------------------- 2
Supplement-1
Please file and use this supplement manual together with the service manual for Model No. KX-TDA6381X,
KX-TDA6381SX Order No. KMS1405063CE.
KX-TDA6381SX Order No. KMS1405063CE.
2
KX-TDA6381X/KX-TDA6381SX
1 CHANGES
1.1.
Subject
KX-TDA6381X
SUFFIX LOCATION
1.2.
Replacement Parts List
NM
KXTDA6381X
KXTDA6381SX
Suffix
Reason for suffix change
A to B
Add of TELEPERMIT LABEL.
Reason for Change
*The following items (1-8) indicate the reason for change. See the “Notes” column for each part in ORIGINAL AND NEW PARTS COMPARISON
LISTS.
1. Improve performance
*The following items (1-8) indicate the reason for change. See the “Notes” column for each part in ORIGINAL AND NEW PARTS COMPARISON
LISTS.
1. Improve performance
Remarks:
2. Change of material or dimension
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7. Correction
8. Other
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7. Correction
8. Other
Interchangeability Code (Symbols: B) Following V-Z interchange abilities are indicated on the Notes in the bottom column.
Parts
Set Production
V Original
New
Early (before change)
Late (after change)
Late (after change)
Original or new parts may be used in early or late production sets.
Use original parts until exhausted, then stock new parts.
Use original parts until exhausted, then stock new parts.
W Original
New
Early (before change)
Late (after change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in early or
late production sets. Use original parts where possible, then stock new parts.
late production sets. Use original parts where possible, then stock new parts.
X Original
New
Early (before change)
Late (after change)
Late (after change)
New parts only may be used in early or late production sets.
Stock new parts.
Stock new parts.
Y Original
New
Early (before change)
Late (after change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in late
production sets only. Stock both original and new parts.
production sets only. Stock both original and new parts.
Z Other
Ref. No.
Part No.
Part Name & Description
Pcs
Remarks
Notes
Time of change
(Suffix)
Original (Old)
New
Main Board Parts
T1A-T1H
T1A-T1H
ETJS08ZE11AF
G5AYA0000012
TRANSFORMER
8
8
V
---
Sub Board Parts
T1I-T1P
T1I-T1P
ETJS08ZE11AF
G5AYA0000012
TRANSFORMER
8
8
V
---
Display