Panasonic KX-TDA100DRP Service Manual ▷ View online
29
KX-TDA100DRP
Available Telephones
This main unit (Hybrid IP-PBX) supports all of the Panasonic KX-T76xx series and KX-DT300 series:
• Digital/Analog proprietary telephones (e.g., KX-T7625, KX-T7630, KX-T7633, KX-T7636)
• DSS consoles (e.g., KX-T7640)
• DSS consoles (e.g., KX-T7640)
This main unit (Hybrid IP-PBX) does not support the following telephones:
• KX-T308xx series Proprietary Telephones and DSS consoles
• KX-T616xx series Proprietary Telephones and DSS consoles
• KX-T1232xx series Proprietary Telephones and DSS consoles
• KX-T616xx series Proprietary Telephones and DSS consoles
• KX-T1232xx series Proprietary Telephones and DSS consoles
For the equipment (e.g., Add-on Key Module, USB Module, Headset) that can be connected to a particular telephone, refer to
the telephone’s manual.
the telephone’s manual.
KX-TDA0181
16-Port Analogue Trunk Card
(LCOT16)
(LCOT16)
16-port analogue trunk card with 4 power failure transfer (PFT) ports.
KX-TDA0182
8-Port DID Card (DID8)
8-port DID trunk card.
KX-TDA0183
4-Port Analogue Trunk Card
(LCOT4)
(LCOT4)
4-port analogue trunk card with 2 power failure transfer (PFT) ports.
KX-TDA0184
8-Port E & M Trunk Card (E&M8)
8-port E & M (TIE) trunk card. Type 5 support.
KX-TDA0187
T-1 Trunk Card (T1)
1-port T1 trunk card. EIA/TIA standard compliant.
KX-TDA0188
E-1 Trunk Card (E1)
1-port E1 trunk card. ITU-T standard compliant.
KX-TDA0189
8-Port Caller ID/Pay Tone Card
(CID/PAY8)
(CID/PAY8)
8-port Caller ID signal type FSK/FSK (with Call Waiting Caller ID [Visual Caller
ID])/DTMF, and 8-port Pay Tone Service (12 kHz/16 kHz).
To be mounted on the LCOT8/LCOT16 card.
ID])/DTMF, and 8-port Pay Tone Service (12 kHz/16 kHz).
To be mounted on the LCOT8/LCOT16 card.
KX-TDA0190
Optional 3-Slot Base Card (OPB3)
Optional 3-slot base card for mounting a maximum of 3 optional service cards
from the following: MSG4, ESVM4, ESVM2, DPH4, DPH2 or EIO4 card.
from the following: MSG4, ESVM4, ESVM2, DPH4, DPH2 or EIO4 card.
KX-TDA0191
4-Channel Message Card (MSG4)
4-channel message card. To be mounted on the OPB3 card.
KX-TDA0192
2-Channel Simplified Voice
Message Card (ESVM2)
Message Card (ESVM2)
2-channel simplified voice message card for Built-in Simplified Voice Message
feature. Also supports MSG card features. To be mounted on the OPB3 card.
feature. Also supports MSG card features. To be mounted on the OPB3 card.
KX-TDA0193
8-Port Caller ID Card (CID8)
8-port Caller ID signal type FSK/FSK (with Call Waiting Caller ID [Visual Caller
ID])/DTMF. To be mounted on the LCOT8/LCOT16 card.
ID])/DTMF. To be mounted on the LCOT8/LCOT16 card.
KX-TDA0194
4-Channel Simplified Voice
Message Card (ESVM4)
Message Card (ESVM4)
4-channel simplified voice message card for Built-in Simplified Voice Message
feature. Also supports MSG card features. To be mounted on the OPB3 card.
feature. Also supports MSG card features. To be mounted on the OPB3 card.
KX-TDA0196
Remote Card (RMT)
Analogue modem card for remote communication with the PBX. ITU-T V.90
support. To be mounted on the DMPR card.
support. To be mounted on the DMPR card.
KX-TDA0284
4-Port BRI Card (BRI4)
4-port ISDN Basic Rate Interface card with 1 power failure transfer port. EURO-
ISDN/ETSI compliant.
ISDN/ETSI compliant.
KX-TDA0288
8-Port BRI Card (BRI8)
8-port ISDN Basic Rate Interface card with 1 power failure transfer port. EURO-
ISDN/ETSI compliant.
ISDN/ETSI compliant.
KX-TDA0290CE/
KX-TDA0290CJ
KX-TDA0290CJ
PRI Card (PRI30)
1-port ISDN Primary Rate Interface card (30B channels).
EURO-ISDN/ETSI compliant.
EURO-ISDN/ETSI compliant.
KX-TDA0290
PRI Card (PRI23)
1-port ISDN Primary Rate Interface card (23B channels). NI (North American
standard ISDN protocol) compliant.
standard ISDN protocol) compliant.
KX-TDA0410
CTI Link Card (CTI-LINK)
Ethernet card for CTI communication via 10BASE-T port. CSTA Phase 3 proto-
col compatible.
col compatible.
KX-TDA0470
16-Channel VoIP Extension Card
(IP-EXT16)
(IP-EXT16)
16-channel VoIP extension card. Compliant with Panasonic proprietary proto-
col, and ITU-T G. 729a and G.711 codec methods.
col, and ITU-T G. 729a and G.711 codec methods.
KX-TDA0484
4-Channel VoIP Gateway Card
(IP-GW4E)
(IP-GW4E)
4-channel VoIP gateway card. Compliant with VoIP H.323 V.2 protocol, and
ITU-T G.729a, G. 723.1, and G.711 codec methods.
ITU-T G.729a, G. 723.1, and G.711 codec methods.
KX-TDA0490
16-Channel VoIP Gateway Card
(IP-GW16)
(IP-GW16)
16-channel VoIP gateway card. Compliant with VoIP H.323 V.2 protocol, and
ITU-T G.729a, G. 723.1, and G.711 codec methods.
ITU-T G.729a, G. 723.1, and G.711 codec methods.
KX-TDA0920
SD Memory Card for Software
Upgrade to Enhanced Version
Upgrade to Enhanced Version
Optional SD Memory Card to use enhanced features. For more details, refer to
the SD Memory Card Installation/Upgrade Guide.
the SD Memory Card Installation/Upgrade Guide.
KX-TDA1176
16-Port Single Line Telephone
Extension with Caller ID and
Message Lamp Card (MCSLC16)
Extension with Caller ID and
Message Lamp Card (MCSLC16)
16-port extension card for SLTs with Caller ID (FSK), Message Waiting Lamp
control, and 2 power failure transfer (PFT) ports.
Maximum power output of 90 V for Message Waiting Lamp control.
control, and 2 power failure transfer (PFT) ports.
Maximum power output of 90 V for Message Waiting Lamp control.
KX-TDA1178
24-Port Single Line Telephone
Extension with Caller ID and
Message Lamp Card (MCSLC24)
Extension with Caller ID and
Message Lamp Card (MCSLC24)
24-port extension card for SLTs with Caller ID (FSK), Message Waiting Lamp
control, and 2 power failure transfer (PFT) ports.
Maximum power output of 90 V for Message Waiting Lamp control.
control, and 2 power failure transfer (PFT) ports.
Maximum power output of 90 V for Message Waiting Lamp control.
KX-TDA1180
8-Port Analogue Trunk Card with
CID (CLCOT8)
CID (CLCOT8)
8-port analogue trunk card with Caller ID, and 2 power failure transfer (PFT)
ports. Caller ID signal type FSK/FSK (with Call Waiting Caller ID [Visual Caller
ID])/DTMF compatible.
ports. Caller ID signal type FSK/FSK (with Call Waiting Caller ID [Visual Caller
ID])/DTMF compatible.
KX-TDA1186
8-Port Analogue Trunk with Caller
ID Daughter Card (CLCOT8E)
ID Daughter Card (CLCOT8E)
8-port analogue trunk daughter card with Caller ID. Caller ID signal type FSK/
FSK (with Call Waiting Caller ID [Visual Caller ID])/DTMF compatible. To be
mounted on the CLCOT8 card.
FSK (with Call Waiting Caller ID [Visual Caller ID])/DTMF compatible. To be
mounted on the CLCOT8 card.
Model No.
Model Name
Description
30
KX-TDA100DRP
Abbreviations in this manual
Digital proprietary telephone: DPT
Portable station: PS
Single line telephone: SLT
Portable station: PS
Single line telephone: SLT
Note:
• There are some optional service cards and features that are not available for certain countries/areas. Consult your autho-
rized Panasonic dealer for detailed instructions.
• The power supply capacity of this main unit (Hybrid IP-PBX) may differ from the values described in this manual depending
on the model number. Please consult your dealer for detailed information.
6.3.1.
System Connection Diagram
31
KX-TDA100DRP
32
KX-TDA100DRP
7 Test Mode
7.1.
Diagnosis
7.1.1.
Diagnosis features
Card Test and Pair Port Test is in Diagnosis Features.
7.1.1.1.
Card Test
Card Test -SUMMARY
Description
Diagnose all kind of Cards.
Description
Diagnose all kind of Cards.
Parallel of Diagnose item of Card Tests and every Cards
7.1.1.2.
Local Loop Back Diagnosis
Diagnose by transmission of the data from MPR to Card, and doing the Loop back test to return the data to MPR.
The point to do Loop back is different from the every cards, be able to do full diagnosis by Loop back test on the every points.
The point to do Loop back is different from the every cards, be able to do full diagnosis by Loop back test on the every points.
Local loop back diagnosis test
Local loop back diagnosis test of every Cards
Diagnosis result of every test points
DLC4
on
MPR
DLC MCSLC16/
MCSLC24
CS-INF LCOT
T1
E1
BRI
PRI OPB3 E&M CT1-
LINK
CLCOT8/
CLCOT16
Local loop back diagnosis
X
X
X
X
X
X
X
X
X
X
X
Card CT bus diagnosis
X
X
X
X
X
X
X
X
X
X
DTMF receive test
X
X
X
PT
loop
back
diagnosis
X
X
DSP DTMF generator/receiver
diagnosis
diagnosis
X
X
DSP
DTMF
receiver
diagnosis
X
X
Framer IC alarm signal detection
diagnosis
diagnosis
X
X
X
Framer IC error detection diagno-
sis
sis
X
X
X
CS-INF
loop
back
diagnosis
X
Super frame synchronization diag-
nosis
nosis
X
Caller
ID
card
loop
back
diagnosis
X
Extension
mode
setting
test
X
CTI-LINK
loop
back
diagnosis
X
Primary circuit
Primary circuit loop back test
Framer IC ST path (Analog)
IC Analog I/F loop back test
Framer IC (Digital)
IC Digital I/F loop back test
ASIC CODEC (PITS)
PITS I/F test loop back
Local HW I/F point
Local HW I/F loop back test
Local TSW point
Local TSW loop back test
DLC4
on
MPR
DLC MCSLC16
/MCSLC24
CS-
INF
LCOT
T1
E1
BRI
PRI OPB3 E&M CT1-
LINK
CLCOT8/
CLCOT16
Primary
circuit
X
X
X
Framer
IC
ST
path
(Analog)
X
X
Framer IC (Digital)
X
X
X
X
ASIC CODEC (PITS)
Local HW I/F point
X
X
X
X
X
X
X
X
X
Local TSW point
X
X
X
X
X
X
X
X
X
X
X
OK
loop back diagnosis OK
NG
loop back diagnosis NG
Click on the first or last page to see other KX-TDA100DRP service manuals if exist.