Panasonic KX-TDA0156CE Service Manual ▷ View online
10
KX-TDA0156CE
5 Installation Instructions
5.1.
Connecting the Cell Station to the Hybrid IP-PBX
KX-TDA0156CE connecting to KX-TDA100/KX-TDA200/KX-TDA600/KX-TDE100/KX-TDE200/KX-TDE600
Note
The illustration of the PBX is based on the KX-TDE200.
Accessories and User-supplied Items for the CS
Accessories (included): Screws x 2, Washers x 2
User-supplied (not included): RJ11 connector
Note
For details about CSIF card, refer to the Installation Manual for your PBX.
11
KX-TDA0156CE
5.2.
Connectiong the CS
1. Connect the cable from CSIF card to the CS.
2. Pass the cable through the groove of the CS (in any direction depending on your preference).
12
KX-TDA0156CE
6 Test Mode
6.1.
Required Equipment
1. Personal Computer with serial port.
2. Service JIG cable (PSZZ2CA155EU)
3. TEL cord
4. Power Supply Adaptor (PSZZ1TDA0142)
5. AC Adaptor (KX-TCA1 / KX-A11 / PSLP1434)
6. Maintenance software for PC (PSZZ3TD7896M)
2. Service JIG cable (PSZZ2CA155EU)
3. TEL cord
4. Power Supply Adaptor (PSZZ1TDA0142)
5. AC Adaptor (KX-TCA1 / KX-A11 / PSLP1434)
6. Maintenance software for PC (PSZZ3TD7896M)
6.2.
Initial Setting
1. Connect TDA0156CE to your PC with the RS-232C cable, and then power on TDA0156CE with a Power Supply Adaptor.
2. Set DIP switch pin 2 to 6 from OFF to ON.
3. Copy the Maintenance software (KX-TD7896BaseUnit.exe) from Floppy Disk to your PC and double click the KX-TD7896
13
KX-TDA0156CE
4. Set communication environment
Click “Config” and configure as follows:
Click “OK”.
Selected items will be stored.
Selected items will be stored.
6.3.
Command Reference
6.3.1.
Select From Command Menu
- Example of Operation -
1. Click [test command] tag
Click on the first or last page to see other KX-TDA0156CE service manuals if exist.