Panasonic KX-NT560RU / KX-NT560RU-B Service Manual ▷ View online
17
KX-NT560RU/KX-NT560RU-B
4.2.9.1.
12V/9V
→ 3.3V
This Power circuit is DCDC step-down convertor cuircuit that outputs 3.3V from input voltage(12V(PoE)/9V(AC adaptor).
IC304 starts operating when the voltage at pin1 becomes 1.5V or more. And IC304 controls Q301 so that the voltage divided by
R304 and R319 may become 1V, and adjusts the output voltage to a target voltage value.
Resistors are set in this circuit so that the output voltage may become 3.3V.
IC304 starts operating when the voltage at pin1 becomes 1.5V or more. And IC304 controls Q301 so that the voltage divided by
R304 and R319 may become 1V, and adjusts the output voltage to a target voltage value.
Resistors are set in this circuit so that the output voltage may become 3.3V.
4.2.9.2.
12V/9V
→ 5V
This Power circuit is DCDC step-down convertor cuircuit that outputs 5.0V from input voltage(12V(PoE)/9V(AC adaptor).
IC302 starts operating when the voltage at pin1 becomes 1.6V or more. And IC302 controls the transistor built into IC302 so that
the voltage divided by R303 and R306 may become 0.8V, and adjusts the output voltage to a target voltage value.
Resistors are set in this circuit so that the output voltage may become 5.0V.
IC302 starts operating when the voltage at pin1 becomes 1.6V or more. And IC302 controls the transistor built into IC302 so that
the voltage divided by R303 and R306 may become 0.8V, and adjusts the output voltage to a target voltage value.
Resistors are set in this circuit so that the output voltage may become 5.0V.
4.2.9.3.
12V/9V
→ 24V
This Power circuit is DCDC step-up convertor cuircuit that outputs 24V from input voltage(12V(PoE)/9V(AC adaptor).
IC305 starts operating when the voltage at pin1 becomes 1.8V or more. And IC305 controls the transistor built into IC305 so that
the voltage divided by R321,R322 and R323 may become 0.2V, and adjusts the output voltage to a target voltage value.
Resistors are set in this circuit so that the output voltage may become 24V.
IC305 starts operating when the voltage at pin1 becomes 1.8V or more. And IC305 controls the transistor built into IC305 so that
the voltage divided by R321,R322 and R323 may become 0.2V, and adjusts the output voltage to a target voltage value.
Resistors are set in this circuit so that the output voltage may become 24V.
18
KX-NT560RU/KX-NT560RU-B
4.2.9.4.
3.3V
→ 1.2V
This Power circuit is DCDC step-down convertor cuircuit that outputs 1.2V from input voltage 3.3V.
IC301 starts operating when the voltage at pin1 becomes 1.2V or more. And IC301 controls Q302 so that the voltage divided by
R317 and R327 may become 0.9V, and adjusts the output voltage to a target voltage value.
Resistors are set in this circuit so that the output voltage may become 1.2V.
IC301 starts operating when the voltage at pin1 becomes 1.2V or more. And IC301 controls Q302 so that the voltage divided by
R317 and R327 may become 0.9V, and adjusts the output voltage to a target voltage value.
Resistors are set in this circuit so that the output voltage may become 1.2V.
4.2.9.5.
48V(PoE)
→ 12V
IC402(PoE IC) starts the PoE classification when connected with the switching hub with PoE.
After the PoE classification ends, PWM conversion function of IC402 starts working.
IC402 controlls Q401 so that the voltage between pin6(SENP) of IC402 and pin4(SEN) becomes 1.5V,and adjust the output voltage
to a target value.
Resistors are set in this circuit so that the output voltage may become 12V.
After the PoE classification ends, PWM conversion function of IC402 starts working.
IC402 controlls Q401 so that the voltage between pin6(SENP) of IC402 and pin4(SEN) becomes 1.5V,and adjust the output voltage
to a target value.
Resistors are set in this circuit so that the output voltage may become 12V.
Note
As potential of PoE_VSS and DG in the schematic diagram is different,pay attension at measurement of volateg with PoE hub.
19
KX-NT560RU/KX-NT560RU-B
5 Location of Controls and Components
5.1.
Name and Locations
Front View
20
KX-NT560RU/KX-NT560RU-B
6 Installation Instructions
6.1.
Connections
This section explains the ports and connectors on the unit.
Connections for AC Adaptor/LAN/PC
Connections for AC Adaptor/LAN/PC
CAUTION
Optional AC Adaptor
• Use a Panasonic AC adaptor.
• The AC adaptor is used as the main disconnect device. Ensure that the AC outlet is installed near the unit and is easily acces-
• Use a Panasonic AC adaptor.
• The AC adaptor is used as the main disconnect device. Ensure that the AC outlet is installed near the unit and is easily acces-
sible.
When connecting a headset
• Ensure that the headset cord has slack and is not pulled tight during use to prevent damage to the connectors.
• Cords used to connect devices to the EHS jack or headset jack must be less than 3 m in length.
• Ensure that the headset cord has slack and is not pulled tight during use to prevent damage to the connectors.
• Cords used to connect devices to the EHS jack or headset jack must be less than 3 m in length.
Notice
• The following headsets can be used with this unit. (Not all operations with the headsets can be guaranteed.)
- Wired headsets
Panasonic RP-TCA400 or RP-TCA430
- EHS headsets
Selected Plantronics
Panasonic RP-TCA400 or RP-TCA430
- EHS headsets
Selected Plantronics
®
-brand headsets
- Bluetooth headsets
For up-to-date information about headsets that have been tested with this unit, please contact your dealer.
For up-to-date information about headsets that have been tested with this unit, please contact your dealer.
Click on the first or last page to see other KX-NT560RU / KX-NT560RU-B service manuals if exist.