KX-NS1000UC (serv.man6) — Panasonic PBX Service Manual (repair manual). Page 10

View Panasonic KX-NS1000UC (serv.man6) Service Manual online

10
KX-NS1000UC
4.3.
Mother Board Circuit Operation
4.3.1.
Mother Board
1) Function
• PBX System Control  and Management
• Circuit Switching (includes gain adjustment function)
• Conference Call 
• Voice  Mail
• MOH
• PAGING
2) Hardware Configuration
• Power Supply : DC/DC Converter
• CPU : Dual ARM11core devices (650MHz) IC100
• FPGA : IC300
• Flash ROM : 8Mbyte [4Mbit x 16bit x 1]  (for boot programs) IC208
• SDRAM : 512Mbyte [128Mbit  x 8bit  x  4]  (for OS and application program area) IC101, IC102, IC104, IC105
• SRAM : 2Mbyte [1Mbit x 16bit x 1]  (for user configuration data backup) IC209
• Serial Flash ROM : 8Mbyte  (for internal MOH data) IC305
• USB 2.0 Hub Controller : IC603
• Gigabit Ethernet Switch (L2SW) : IC502
3) Interfaces
• Storage Memory Card  I/F x 1  (for OS , application programs , and Voice Mail data store) 
• USB I/F  x 1 (for UPS status monitoring)
• LAN I/F  x 3 (for maintenance and the LAN, WAN)
• MOH : External sound input x 1
• PAGING : External output x 1
• RS232C : x 1 (for system maintenance)
4) Operation Rating
• Power Input : +15V_CON
• Power Output : +15V (for DSP_Card/Line_Card/FAN/MOH)
+5VD_USB (for USB_VBUS)
+5.0VD (for DC/DC+1.8V, +0.98V)
+3.3V (for IO, FAX_Card, Storage Memory)
+3.3VD_B (for SRAM/RTC backup)
+2.5VD (for CPU, L2SW)
+1.8VD_CPU (for CPU, DDR2-SDRAM)
+1.8VD_AVDD (for L2SW)
+1.2VD_LDO (for FPGA_core)
+1.0VD_CPU (for CPU_core)
+1.0VD_L2CORE (for L2SW_core)
4.3.2.
Description of Each Part
LED Lamp (STATUS) : Turns on to indicate system operating condition.
LED Lamp (BATT ALARM) : Turns on to indicate the dropping of the lithium battery voltage (less than 2.8V).
LED Lamp (MASTER) : Turns on to indicate Master / Slave operating mode.
LED Lamp (LINK/ ACT) : Link status indication : OFF : Off-line/ON : Linked normally/Flashing : In communication
LED Lamp (1000 / 100/ 10) Data transmission speed indication : OFF : 10 Mbps/Yellow ON : 100 Mbps/Green ON: 1000 Mbps
System Initialize Switch : On default startup, set the switch to the "SYSTEM INITIALIZE" position for the power ON. Return the
Page of 127
Display

Click on the first or last page to see other KX-NS1000UC (serv.man6) service manuals if exist.