KX-NCP1173XJ (serv.man2) — Panasonic PBX Service Manual (repair manual)

Model
KX-NCP1173XJ (serv.man2)
Pages
53
Size
2.37 MB
Type
PDF
Document
Service Manual
Brand
Device
PBX / 8-PORT SINGLE LINE TELEPHONE EXTENSION CARD
File
kx-ncp1173xj-sm2.pdf
Date

View Panasonic KX-NCP1173XJ (serv.man2) Service Manual online

ORDER NO. KMS0810561CE
8-Port Single Line Telephone Extension Card
Model No.
KX-NCP1173XJ
(for Canada, Asia, Oceania, Middle Near Esat, Africa 
and Latin America)
2
KX-NCP1173XJ
TABLE OF CONTENTS
PAGE
PAGE
1 Safety Precautions -----------------------------------------------3
1.1. For Service Technicians  ---------------------------------3
2 Warning --------------------------------------------------------------3
2.1. About Lead Free Solder (PbF: Pb free) --------------3
2.1.1. Suggested PbF Solder -------------------------------3
2.2. Discarding of P. C. Board --------------------------------4
3 Specifications ------------------------------------------------------5
4 General/Introduction 
---------------------------------------------5
4.1. General Description ---------------------------------------5
5 Technical Descriptions------------------------------------------6
5.1. Block Diagram ----------------------------------------------6
5.2. Circuit Operation -------------------------------------------7
5.2.1. Control-System Circuit -------------------------------7
5.2.2. Line-System Circuit -----------------------------------8
5.2.3. Power Supply Circuit ------------------------------- 11
6 Location of Controls and Components------------------ 13
6.1. Names and Locations----------------------------------- 13
7 Installation Instructions--------------------------------------- 14
7.1. Information about the Physical Extension
Cards -------------------------------------------------------- 14
7.1.1. SLC8 Card -------------------------------------------- 14
8 Troubleshooting Guide---------------------------------------- 15
9 Miscellaneous 
---------------------------------------------------- 22
9.1. How To Replace a Flat Package IC ----------------- 22
9.1.1. Preparation-------------------------------------------- 22
9.1.2. Removal Procedure--------------------------------- 22
9.1.3. Procedure --------------------------------------------- 22
9.1.4. Removing Solder From Between Pins --------- 22
9.2. Terminal Guide of the ICs Transistors and
Diodes------------------------------------------------------- 23
9.3. Memo-------------------------------------------------------- 24
10 Schematic Diagram--------------------------------------------- 25
10.1. Block Diagram -------------------------------------------- 25
10.2. No.1---------------------------------------------------------- 26
10.3. No.2---------------------------------------------------------- 28
10.4. No.3---------------------------------------------------------- 30
10.5. No.4---------------------------------------------------------- 34
11 Printed Circuit Board ------------------------------------------ 38
11.1. Component View ----------------------------------------- 38
11.2. Bottom View ----------------------------------------------- 39
12 Appendix Information of Schematic Diagram --------- 40
13 Exploded View and Replacement Parts List 
----------- 41
13.1. IC Data------------------------------------------------------ 41
13.1.1. IC100 (ASIC) ----------------------------------------- 41
13.1.2. IC300, IC302 (CODEC)---------------------------- 43
13.2. Cabinet and Electrical Parts Location--------------- 44
13.3. Accessories and Packing Material------------------- 45
13.4. Replacement Parts List --------------------------------- 46
13.4.1. Cabinet and Electrical Parts Location ---------- 46
13.4.2. Accessories and Packing Materials------------- 46
13.4.3. Main Board Parts ------------------------------------ 46
3
     KX-NCP1173XJ
1 Safety Precautions
1.1.
For Service Technicians 
• Repair service shall be provided in accordance with repair technology information such as service manual so as to prevent fires,
injury or electric shock, which can be caused by improper repair work.
1. When repair services are provided, neither the products nor their parts or members shall be remodeled.
2. If a lead wire assembly is supplied as a repair part, the lead wire assembly shall be replaced.
3. FASTON terminals shall be plugged straight in and unplugged straight out.
• ICs and LSIs are vulnerable to static electricity.
When repairing, the following precautions will help prevent recurring malfunctions.
1. Cover plastic parts boxes with aluminum foil.
2. Ground the soldering irons.
3. Use a conductive mat on worktable.
4. Do not grasp IC or LSI pins with bare fingers.
2 Warning
2.1.
About Lead Free Solder (PbF: Pb free)
Note:
In the information below, Pb, the symbol for lead in the periodic table of elements, will refer to standard solder or solder that con-
tains lead.
We will use PbF when discussing the lead free solder used in our manufacturing process which is made from Tin, (Sn), Silver,
(Ag), and Copper, (Cu).
This model, and others like it, manufactured using lead free solder will have PbF stamped on the PCB. For service and repair
work we suggest using the same type of solder. 
Caution
• PbF solder has a melting point that is 50
° ~ 70° F, (30° ~ 40°C) higher than Pb solder. Please use a soldering iron with tempera-
ture control and adjust it to 700
° ± 20° F, (370° ± 10°C). 
Exercise care while using higher temperature soldering irons.:
Do not heat the PCB for too long time in order to prevent solder splash or damage to the PCB.
• PbF solder will tend to splash if it is heated much higher than its melting point, approximately 1100
°F, (600°C).
• When applying PbF solder to double layered boards, please check the component side for excess which may flow onto the
opposite side (See figure, below).
2.1.1.
Suggested PbF Solder
There are several types of PbF solder available commercially. While this product is manufactured using Tin, Silver, and Copper,
(Sn+Ag+Cu), you can also use Tin and Copper, (Sn+Cu), or Tin, Zinc, and Bismuth, (Sn+Zn+Bi). Please check the manufac
turer's specific instructions for the melting points of their products and any precautions for using their product with other 
materials. 
The following lead free (PbF) solder wire sizes are recommended for service of this product: 0.3mm, 0.6mm and 1.0mm.
4
KX-NCP1173XJ
2.2.
Discarding of P. C. Board
When discarding P. C. Board, delete all personal information such as telephone directory and caller list or scrap P. C. Board.
5
     KX-NCP1173XJ
3 Specifications
4 General/Introduction
4.1.
General Description
This card, which is used in the free slot of the NCP system, can randomly connect eight of DPT. 
Functional Block
Functional contents
Extension Interface
Number of Ports
8 ports
SLT Interface
+30V 30mA Feeding function
Dial-pulse signal detecting function
DTMF signal detecting function
Bell signal issuing function
Hook detecting function
Ring trip detecting function
2W/4W converting function
Surge protective function
Infineon-manufactured 4ch codec function
CODEC function
µ/A Iaw switching function
Test function (Loop back, Tone generation)
Programmable digital filtering function
Serial interface function
PIO function
DTMF Receiver
8 lines for each port
Extension Caller ID
Supported standard 
ITU-TV.23 (1200bps) FSK
BELL202 (1200bps) FSK
On-board Ringer
20/25Hz 75Vrms
Phase control (Three-phase / Four-phase)
On-board DC/DC Power Supply
Input +15V
Output +15V, +5V, +3.3V
ASIC
EC bus interface function
CT bus interface function, Digital PLL function
Local bus interface function
Time switch function, Gain controlling function, DPRAM function
Private telephone controlling interface function
Parallel IO function
LED Display Circuit
Card status indicating LED: Two colors (Red/Green)
External Interface Connector
Extension interface
RJ45: 8port

Download Panasonic KX-NCP1173XJ (serv.man2) Service Manual (Repair Manual)

Here you can view online or download Panasonic KX-NCP1173XJ (serv.man2) Service Manual in pdf. This Service Manual can help you recover, restore, fix, disassemble and repair Panasonic KX-NCP1173XJ (serv.man2) PBX. Information contained in Panasonic KX-NCP1173XJ (serv.man2) service manual (repair manual) typically includes:

  • Disassembly, troubleshooting, programming, maintenance, remote, adjustment, installation and setup instructions.
  • Schematics, wiring and block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Parts list (bill of materials).