Panasonic KX-DT346UA Service Manual ▷ View online
25
KX-DT346UA/KX-DT346UA-B
7.9.
Option (DT301) Does Not work
7.10. Test Mode
This unit has the LCD and LEDs TEST mode
By using this mode, you can easily check LCD and LEDs.
- To TEST mode -
1)Pushing two button (dial 7 and CO1) together.
1)Pushing two button (dial 7 and CO1) together.
Then turn on a power supply (Connect the telephone line cord).
2)Press Dial 4.
- All Red LEDs lit.
- LCD displays "NNNNNNNNNNNNNNNN"
- LCD displays "NNNNNNNNNNNNNNNN"
3)Press Dial 5.
- LCD displays "IIIIIIIIIIIIIIII"
- All Green LEDs lit.
- All Green LEDs lit.
4)Press Dial 6.
- LCD displays "BBBBBBBBBBBBBBBB"
- All LEDs go Off.
- All LEDs go Off.
26
KX-DT346UA/KX-DT346UA-B
8 Disassembly and Assembly Instructions
8.1.
Remove Main Board
1. Remove 6 Screws (A).
2. Remove the Cabinet Cover.
2. Remove the Cabinet Cover.
3. Remove 3 Screws (A).
4. Remove 1 Flat cables and 2connectors.
5. Remove the Main and Jack Boards from the Cabinet Body.
4. Remove 1 Flat cables and 2connectors.
5. Remove the Main and Jack Boards from the Cabinet Body.
27
KX-DT346UA/KX-DT346UA-B
8.2.
Disassembly for Lower Cabinet Ass’y
1. Remove the 2 Pivot by releasing the hook.
2. Remove the Stand.
2. Remove the Stand.
3. Remove the hook of Spring from rib.
4. Remove the Hook Ass’y from the Cabinet Cover by releasing the 2
4. Remove the Hook Ass’y from the Cabinet Cover by releasing the 2
hooks A.
28
KX-DT346UA/KX-DT346UA-B
8.3.
Assembly for Lower Cabinet Ass’y
5. Remove the Guide Hook and Spring from the Hook Case.
1. Insert the Spring and Guide Hook into the Hook Case.
Note:
Confirm that the Spring is set as in Fig-A.
2. Set the Spring on the rib as in Fig-B.
3. Hold the Hook Ass’y pushing with your finger at point “B” and then
3. Hold the Hook Ass’y pushing with your finger at point “B” and then
insert the Hook Ass’y into the Cabinet Cover.
Click on the first or last page to see other KX-DT346UA service manuals if exist.