Panasonic UB-5315 / UB-5815 (serv.man5) Service Manual / Supplement ▷ View online
Note:
5
UB-5315SERIES / UB-5815SERIES
4 "SECTION 4 INSTALLATION"
4.1. "Section 4.10 Assembling the Wall-mounting Fixture"
To install Panaboard to a wall, Panaboard accessories Wall-mounting Fixture (Upper), Wall-mounting Fixture (Lower), and Wall-
mounting Template are required for the Wall-mounting. The procedure is as follows.
mounting Template are required for the Wall-mounting. The procedure is as follows.
1. Confirm the wall is strong enough to support the weight of the Panaboard.
Caution:
The wall must be capable of supporting at least
784 N [80 kgf (176 lbs.)] for UB-5315 Series
931 N [95 kgf (209 lbs.)] for UB-5815 Series
2. Tape the Wall-mounting Template to the wall horizontally.
a. Assemble the Wall-mounting Template by taping the Wall-mounting template 1 (TOP) to Wall-mounting template 2
(BOTTOM).
b. Tape the Wall-mounting Template on the wall.
· When taping the template on the wall, make sure it is level.
3. Drill holes in the wall at the 4 spots indicated by
and
, or
and
for the Wall-mounting Fixtures.
· Holes on the Wall-mounting Fixture are 1/4” in diameter.
4. After removing the Wall-mounting Template, attach the Wall-mounting Fixture (Upper) and Wall-mounting Fixture (Lower) with
the appropriate wall-mounting hardware.
6
UB-5315SERIES / UB-5815SERIES
5 "SECTION 13 CIRCUIT BOARDS"
5.1. "Section 13.1 CONTROL Board"
5.1.1. "Section 13.1.1 Front side"
7
UB-5315SERIES / UB-5815SERIES
6 "SECTION 14 SCHEMATIC DIAGRAM"
6.1. "Section 14.1 CONTROL Board"
6.1.1. CONTROL Board (1/8)
UB-
5315S
E
R
IE
S
/
/
UB-
5815S
E
R
IE
S
8
Click on the first or last page to see other UB-5315 / UB-5815 (serv.man5) service manuals if exist.