DOWNLOAD Panasonic KV-SL3066 / KV-SL3056 / KV-SL3055 / KV-SL3036 / KV-SL3035 (serv.man5) Service Manual ↓ Size: 2.2 MB | Pages: 10 in PDF or view online for FREE

2

Suffix

Reason for suffix change

A to B

To improve the dust issue and paper feeding ability.

Reason for Change
*The following items (1-8) indicate the reason for change. See the “Notes” column for each part in ORIGINAL AND NEW PARTS COMPARISON 
LISTS.
1. Improve performance

Remarks:
*1: Refer figure.1
*2:Changing 1 pc of part #531.

2. Change of material or dimension
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7. Correction
8. Other

Interchangeability Code

Parts

Set Production

A Original

New

Early (before change)
Late (after change)

Original or new parts may be used in early or late production sets.
Use original parts until exhausted, then stock new parts.

B Original

New

Early (before change)
Late (after change)

Original parts may be used in early production sets only. New parts may be used in early or
late production sets. Use original parts where possible, then stock new parts.

C Original

New

Early (before change)
Late (after change)

New parts only may be used in early or late production sets.
Stock new parts.

D Original

New

Early (before change)
Late (after change)

Original parts may be used in early production sets only. New parts may be used in late
production sets only. Stock both original and new parts.

E

Addition

F

Deletion

G

Other

Ref. No.

Part No.

Part Name & Description

Pcs

Remarks

Time of change 

(Suffix)

Original (Old)

Upper Chassis
437

PNZUS1570M

Reference plate (B)

1

*1

8

B

438

PNDE1086X

Reshuffling lever 2

1

8

C

B

452

------

CIS Dustproof Sheet

1

8

C

B

Lower Chassis 1
549

-----

CIS Dustproof Sponge

1

5

C

B

550

PJDJC0085Z

Conveyor Bearing

1

*2

8

C

B

551

------

Stopper Rubeer for KV-SL3066-CN/
3056-CN/3055-CN/3036-CN/3035-CN

2

5

C

B

Lower Chassis 2
632

PNHX1870Z

Dust Prevent Sheet

1

8

C

B

CONTROL Board (KV-SL3066)
IC14

B0ZBZ0000178

DIODE(SI)

1

8

A

CONTROL Board (KV-SL3056/SL3055/SL3036/SL3035)
IC14

B0ZBZ0000178

DIODE(SI)

1

8

A

3

Changing point    /  Reference plate

After

Current

PNZUS1570M/Reference plate (F)

PNZUS1571M/Reference plate (B)

Difference between 

PNZUS1570M

and

PNZUS1571M

*The thickness of the white sheet is different.

䠄PNZUS1570M䠖0.3mm, PNZUS1571M: 0.5mm䠅

(

Interchangeability Code : B

Case (1) :

Original part : PNZUS1570M

э SetProduction : Early set only

* Production until June 2018.

Case (2-1) :

New part : PNZUS1571M

э SetProduction : Late set only

* From July 2018 production.

Case (2- 2) :

Case of using new part (PNZUS1571M ) for products before July 2018:

* Need to change with PNZES1571M1(Scanning Glass (B))

July 2018

Case (1):PNZUS1570M

Case (2-1): PNZUS1571M

Case (2- 2): PNZUS1571M

+

PNZES1571M1

(Scanning Glass (B) )

Original Early
New  

Late

Case (1)

Case (2 -1)

Case (2 -2)

Production :

figure.1

4

(1) Remove the Back Cover. 

(See 8.2.5. Back Cover)

(2) Remove the screw A and the USB Earth Plate.
(3) Remove the 7 screws C. 
(4) Remove the 2 screws F. 
(5) Tilt the Bottom Plate and remove it from the hole.

Install the Bottom Plate with screws C and F first and then 
install the USB Earth Plate with screw A.
Otherwise the USB Earth Plate may not contact with the 
USB jack on the Control Board correctly.

While slanting the Bottom Plate, insert it into the hole.

(1) Remove the Bottom Plate. 

(See 1.2.1. Bottom Plate)

(2) Remove the CONTROL Board. 

(See 1.2.5. CONTROL Board)

(3) Remove the Polyslider and Gear.
(4) Remove the screw C.
(5) Remove the Platen Motor with Motor Plate.
(6) Remove the 2 screws G and remove the Platen Motor from 

the plate.

(7) Disconnect the connector.

Hole

F

A

USB Earth Plate

C

FFC

Harness

Hole

CONTROL Board

C

G

Platen Motor

Motor Plate

G

Gear

Polyslider

Connector

5

(1) Remove the Bottom Plate. 

(See 1.2.1. Bottom Plate)

(2) Remove 2 screws E.
(3) Disconnect the connector on the CONTROL Board.
(4) Remove the FAN.

(1) Remove the Bottom Plate. 

(See 1.2.1. Bottom Plate)

(2) Remove the 2 screws C.
(3) Remove the Power Supply.
(4) Disconnect the connector from the CONTROL Board on the 

Power Supply.

(1) Remove the Bottom Plate. 

(See 1.2.1. Bottom Plate)

(2) Disconnect all connectors (8 cable connectors and 5 FFC 

cables) to CONTROL Board.

(3) Remove the CONTROL Board.

Power Supply

FAN

C

E

CONTROL Board

FFC

Harness

(1) Remove the CONTROL Board. 

(See 1.2.5. CONTROL Board)

(2) Remove the STARTING SENSOR Board

Assembly.(8.5.7) and remove the Dust Prevent
Sheet when the replacing of the Conveyor Motor
with Cable for KV-SL3066. 

(3) Remove the Side Plate Assembly. 

(See 8.4.5. Side Plate 

Assembly)

(4) Remove the 2 screws A.
(5) Remove the connector and remove Conveyor Motor. 

(1) Remove the CONTROL Board. 

(See 1.2.5. CONTROL Board)

(2) Remove the 3 screws C.
(3) Remove the STARTING SENSOR Board Assembly.
(4) Remove the screw C, disconnect the connector.
(5) Remove the STARTING SENSOR Board.

Conveyor Motor

A

STARTING SENSOR 
Board Assembly

C

C

STARTING SENSOR Board

Connector