Panasonic KV-SL3066 / KV-SL3056 / KV-SL3055 / KV-SL3036 / KV-SL3035 (serv.man2) Service Manual ▷ View online
6
2 Warning
2.1.
Caution
The power socket wall outlet should be located near this equipment and be easily accessible.
2.2.
About Lead Free Solder (PbF: Pb free)
Note:
In the information below, Pb, the symbol for lead in the periodic table of elements, will refer to standard solder or solder that con-
tains lead.
We will use PbF when discussing the lead free solder used in our manufacturing process which is made from Tin, (Sn), Silver,
(Ag), and Copper, (Cu).
This model, and others like it, manufactured using lead free solder will have PbF stamped on the PCB. For service and repair
work we suggest using the same type of solder.
tains lead.
We will use PbF when discussing the lead free solder used in our manufacturing process which is made from Tin, (Sn), Silver,
(Ag), and Copper, (Cu).
This model, and others like it, manufactured using lead free solder will have PbF stamped on the PCB. For service and repair
work we suggest using the same type of solder.
Caution
• PbF solder has a melting point that is 50° ~ 70° F, (30° ~ 40°C) higher than Pb solder. Please use a soldering iron with tempera-
ture control and adjust it to 700° ± 20° F, (370° ± 10°C).
Exercise care while using higher temperature soldering irons.
Do not heat the PCB for too long time in order to prevent solder splash or damage to the PCB.
Exercise care while using higher temperature soldering irons.
Do not heat the PCB for too long time in order to prevent solder splash or damage to the PCB.
• PbF solder will tend to splash if it is heated much higher than its melting point, approximately 1100°F, (600°C).
• When applying PbF solder to double layered boards, please check the component side for excess which may flow onto the
• When applying PbF solder to double layered boards, please check the component side for excess which may flow onto the
opposite side (See figure, below).
7
2.2.1.
Suggested PbF Solder
There are several types of PbF solder available commercially. While this product is manufactured using Tin, Silver, and Copper,
(Sn+Ag+Cu), you can also use Tin and Copper, (Sn+Cu), or Tin, Zinc, and Bismuth, (Sn+Zn+Bi). Please check the manufac
turer's specific instructions for the melting points of their products and any precautions for using their product with other
materials.
The following lead free (PbF) solder wire sizes are recommended for service of this product: 0.3mm, 0.6mm and 1.0mm.
(Sn+Ag+Cu), you can also use Tin and Copper, (Sn+Cu), or Tin, Zinc, and Bismuth, (Sn+Zn+Bi). Please check the manufac
turer's specific instructions for the melting points of their products and any precautions for using their product with other
materials.
The following lead free (PbF) solder wire sizes are recommended for service of this product: 0.3mm, 0.6mm and 1.0mm.
8
3 Specifications
Scanning
*1 The scanning speed differs depending on the host computer, the operating system, the application, the measuring method, the quantity of
data in the image, and the paper type. The scanning speed depends on a measuring method of Panasonic.
*2 For details, see “Compatible Paper”. (See 1
7. Appendix (Operating Manual P.22).)
*3 Using “Long Paper”, you can scan long documents by splitting them into smaller parts. For details about “Long Paper”, refer to the Image
CapturePlus, TWAIN, or ISIS help.
*4 For details, see “Compatible Card”. (See 5.8. Setting Documents and/or Card (
P.16
).)
*5 For details, see “Replacing the Rollers”. (See 1
7. Appendix (Operating Manual P.59).)
“Weight in pounds” of paper represents the weight of 500 (432 x 559 mm [17 x 22 in.]) sheets.
Item
KV-SL3066
KV-SL3056
KV-SL3055
KV-SL3036
KV-SL3035
ADF Scanning
face
Duplex
Scanning method
Color CIS (600 dpi) Background : Black & White
Scanning resolution
100 – 600 dpi (1 dpi step) , 1,200 dpi (Interpolated)
Optical: 300 dpi / 600 dpi (Automatic switch)
Optical: 300 dpi / 600 dpi (Automatic switch)
Scanning size
216 mm (8.5 in.)
Scanning
Speed
Speed
*1
A4 / Letter
Simplex
Binary / color
(200dpi, 300dpi)
Simplex
Binary / color
(200dpi, 300dpi)
65
pages/min.
pages/min.
45
pages/min.
pages/min.
40
pages/min.
pages/min.
35
pages/min.
pages/min.
30
pages/min.
pages/min.
A4 / Letter
Duplex
Binary / color
(200dpi, 300dpi)
Duplex
Binary / color
(200dpi, 300dpi)
130
images/min.
images/min.
90
images/min.
images/min.
80
images/min.
images/min.
70
images/min.
images/min.
60
images/min.
images/min.
Paper
*2
Width
48 – 216 mm (1.9 – 8.5 in.)
Length
*3
When feeding one sheet: 54 mm – unlimited (2.1 in. – unlimited)
When feeding multiple sheets: 54 – 356 mm (2.1 – 14 in.)
When feeding multiple sheets: 54 – 356 mm (2.1 – 14 in.)
Thickness
0.04 – 0.5 mm (1.6 – 19.7 mils) Note: 1 mil = 0.001 in.
Weight
20 – 413 g/m² (5 – 110 lb.)
Feed Capacity
100 sheets: A6 to A4/Letter size 80g/m² (21 lbs.) new paper
75sheets: less than 100mm length paper and Legal size 80g/m² (21 lbs.)
new paper
75sheets: less than 100mm length paper and Legal size 80g/m² (21 lbs.)
new paper
Stacker capacity 150 sheets: 80g/m² (21 lbs.) new paper
Card
*4
Format
ISO format
Size
85.6 × 54 mm (3.4 in. × 2.1 in.)
Thickness
0.76 mm (0.03 in.)
Embossed card up to 1.4 mm (0.055 in.)
Embossed card up to 1.4 mm (0.055 in.)
Feed capacity
3 cards on the feed tray or on the mixed batch card guide
Flatbed
Scanning Method
Color CIS (600 dpi) Background : Black & White (reversible)
Scanning Speed
(Approximate)
Condition
200/300dpi
Binary / Color (JPEG)
(Approximate)
Condition
200/300dpi
Binary / Color (JPEG)
1.5S(A4)
Document size (Maximum)
216×297mm(8.5inch×11.69inch)
Document Thickness
30mm *limit of Flatbed cover closing
3mm *limit of cover close detection
3mm *limit of cover close detection
Auto scanning start when just close document cover as manual mode
Roller replacement
*5
250,000 sheets
Double feed detection
Ultrasonic
(The length of documents that can be detected is 70 mm or more.)
(The length of documents that can be detected is 70 mm or more.)
9
General
*1 The power requirement differs depending on the country/area. Do not use a power source that dose not meet the power source
specifications marked on the unit. The power source specifications of this unit are listed on the rating name plate.
Item
KV-SL3066
KV-SL3056
KV-SL3055
KV-SL3036
KV-SL3035
External dimensions
(Width x Depth x Height)
(Width x Depth x Height)
300 × 650 × 308 mm (11.8 × 25.6 × 13.7 in.)
Weight
6.7 kg (14.8 lb.)
power requirement*1
AC100 -
125V,50/
60Hz,0.8A
AC220 -
240V,50/
60Hz,0.5A
125V,50/
60Hz,0.8A
AC220 -
240V,50/
60Hz,0.5A
AC220 - 240V,50/60Hz,0.5A
Power
consump-
tion
consump-
tion
Scanning
40W or less
37W or less
Ready
10W or less
Sleep
1.8W or less
Power OFF
0.5W or less
Operating environment
Temperature: 5 - 35
o
C(41 - 95
o
F)
Humidity: 20 - 80%RH (No dewdrop)
Storage environment
Temperature: -10 - 50
o
C(14 - 122
o
F)
Humidity: 8 - 75%RH (No dewdrop)
Interface
USB 2.0 interface
Note:
Note:
If the scanner is connected to a USB hub, it is not guaranteed to work.
Option
Roller Exchange Kit: KV-SS061
Roller Exchange Pack KV-SS062(-CN only)
Roller cleaning paper: KV-SS03
Carrier Sheets: KV-SS076
Roller Exchange Pack KV-SS062(-CN only)
Roller cleaning paper: KV-SS03
Carrier Sheets: KV-SS076
Click on the first or last page to see other KV-SL3066 / KV-SL3056 / KV-SL3055 / KV-SL3036 / KV-SL3035 (serv.man2) service manuals if exist.