Panasonic KV-SL1066-M2 / KV-SL1066-U2 / KV-SL1066-B2 / KV-SL1066-K2 / KV-SL1066-C2 / KV-SL1066-CH / KV-SL1056-M2 / KV-SL1056-U2 / KV-SL1055-C2 / KV-SL1055-CH / KV-SL1036-C2 / KV-SL1055-CH / KV-SL1035-C2 / KV-SL1055-CH Service Manual ▷ View online
6
2 Warning
2.1.
Caution
The power socket wall outlet should be located near this equipment and be easily accessible.
2.2.
About Lead Free Solder (PbF: Pb free)
Note:
In the information below, Pb, the symbol for lead in the periodic table of elements, will refer to standard solder or solder that con-
tains lead.
We will use PbF when discussing the lead free solder used in our manufacturing process which is made from Tin, (Sn), Silver,
(Ag), and Copper, (Cu).
This model, and others like it, manufactured using lead free solder will have PbF stamped on the PCB. For service and repair
work we suggest using the same type of solder.
tains lead.
We will use PbF when discussing the lead free solder used in our manufacturing process which is made from Tin, (Sn), Silver,
(Ag), and Copper, (Cu).
This model, and others like it, manufactured using lead free solder will have PbF stamped on the PCB. For service and repair
work we suggest using the same type of solder.
Caution
• PbF solder has a melting point that is 50° ~ 70° F, (30° ~ 40°C) higher than Pb solder. Please use a soldering iron with tempera-
ture control and adjust it to 700° ± 20° F, (370° ± 10°C).
Exercise care while using higher temperature soldering irons.
Do not heat the PCB for too long time in order to prevent solder splash or damage to the PCB.
Exercise care while using higher temperature soldering irons.
Do not heat the PCB for too long time in order to prevent solder splash or damage to the PCB.
• PbF solder will tend to splash if it is heated much higher than its melting point, approximately 1100°F, (600°C).
• When applying PbF solder to double layered boards, please check the component side for excess which may flow onto the
• When applying PbF solder to double layered boards, please check the component side for excess which may flow onto the
opposite side (See figure, below).
7
2.2.1.
Suggested PbF Solder
There are several types of PbF solder available commercially. While this product is manufactured using Tin, Silver, and Copper,
(Sn+Ag+Cu), you can also use Tin and Copper, (Sn+Cu), or Tin, Zinc, and Bismuth, (Sn+Zn+Bi). Please check the manufac
turer's specific instructions for the melting points of their products and any precautions for using their product with other
materials.
The following lead free (PbF) solder wire sizes are recommended for service of this product: 0.3mm, 0.6mm and 1.0mm.
(Sn+Ag+Cu), you can also use Tin and Copper, (Sn+Cu), or Tin, Zinc, and Bismuth, (Sn+Zn+Bi). Please check the manufac
turer's specific instructions for the melting points of their products and any precautions for using their product with other
materials.
The following lead free (PbF) solder wire sizes are recommended for service of this product: 0.3mm, 0.6mm and 1.0mm.
8
3 Specifications
Scanning
Tonal Gradation
Binary, Grayscale, Color, MultiStreamTM (Binary and Color, Binary and Grayscale,
MultiStream is a trademark of EMC Corporation)
MultiStream is a trademark of EMC Corporation)
Image Control
Auto preview, Auto rescan, Automatic Brightness Adjustment,Multi Color Drop Out,
Dynamic Threshold, White Level From Paper,Image Emphasis, Gamma, Automatic
Separation, Noise Reduction
Dynamic Threshold, White Level From Paper,Image Emphasis, Gamma, Automatic
Separation, Noise Reduction
Compression
MH, MMR, JPEG (Color, Grayscale)
Item
KV-SL1066
KV-SL1056
KV-SL1055
KV-SL1036
KV-SL1035
Scanning face
Duplex
Scanning method
1 line Color CIS (300 dpi/600 dpi)
Scanning
speed
speed
*1
•
A4 / Portrait
•
Binary /
color
color
•
200 dpi,
300 dpi
300 dpi
ADF (Simplex)
65
pages/min.
45
pages/min.
pages/min.
40
pages/min.
pages/min.
35
pages/min.
pages/min.
30
pages/min.
pages/min.
ADF (Duplex)
130
images/
min.
min.
90
images/
min.
images/
min.
80
images/
min.
images/
min.
70
images/
min.
images/
min.
60
images/
min.
images/
min.
Scanning resolution
*2
100 dpi – 600 dpi (1 dpi step), 1,200 dpi (Interpolated)
Optical: 300 dpi / 600 dpi (Automatic switch)
Optical: 300 dpi / 600 dpi (Automatic switch)
Paper size
*3
Width × Length
When feeding one sheet:
48 mm × 54 mm – 216 mm × unlimited
(1.9 in. × 2.1 in. – 8.5 in. × unlimited)
48 mm × 54 mm – 216 mm × unlimited
(1.9 in. × 2.1 in. – 8.5 in. × unlimited)
*4
When feeding multiple sheets:
48 mm × 54 mm – 216 mm × 356 mm
(1.9 in. × 2.1 in. – 8.5 in. × 14 in.)
48 mm × 54 mm – 216 mm × 356 mm
(1.9 in. × 2.1 in. – 8.5 in. × 14 in.)
Thickness
Paper: 0.04 mm – 0.5 mm (1.6 mils – 19.7 mils)
Bound documents: 4 mm (157.5 mils) (including carrier sheet)
Note: 1 mil = 0.001 in.
Bound documents: 4 mm (157.5 mils) (including carrier sheet)
Note: 1 mil = 0.001 in.
Weight
20 g/m² – 413 g/m² (5 lb. – 110 lb.)
Card
*5
Format
ISO format
Size
85.6 mm × 54 mm (3.4 in. × 2.1 in.)
Thickness
0.76 mm (30.0 mils)
Embossed card up to 1.4 mm (55.1 mils.)
Embossed card up to 1.4 mm (55.1 mils.)
Feed capacity
3 cards on the feed tray or on the mixed batch card guide
Passport
(M2,U2,B2,K2)
*6
Width
130 mm (5.1 in) or less
Length
188 mm (7.4 in) or less
Thickness
4.0 mm (0.15 in) or less (including carrier sheet)
Feed capacity
100 sheets (80 g/m² [21 lb.] High-quality woodfree paper)
*7
Roller replacement
*8
250,000 sheets
*1
The scanning speed is the maximum speed of the scanner hardware. It does not include software processing time, data transfer
time, etc. The scanning speed measurement is based on Panasonic's measuring method.
time, etc. The scanning speed measurement is based on Panasonic's measuring method.
*2
When scanning a document larger than A5 size at high resolutions over 600 dpi, the scanning may fail due to insufficient memory.
*3
For details, see Operating Manual "Compatible Paper".
*4
Using "Long Paper", you can scan a long document to a series of split scanned images. For details about "Long Paper", refer to
the Image Capture Plus, TWAIN, or ISIS help.
the Image Capture Plus, TWAIN, or ISIS help.
*5
For details, see Operating Manual "Compatible Card".
*6
Use the carrier sheet (KV-SS077) to scan passport.
*7
Paper less than 100 mm (3.9 in.) long or legal size paper: 75 sheets
*8
For details, see Operating Manual "Replacing the Rollers".
9
General
Item
KV-SL1066
KV-SL1056
KV-SL1055
KV-SL1036
KV-SL1035
External dimensions
(Width × Depth × Height)
(Width × Depth × Height)
300 mm × 272 mm × 238 mm (11.8 in. × 10.7 in. × 9.4 in.)
Weight
4.1 kg (including accessories)
4.0 kg (main unit only) (8.8 lb.)
4.0 kg (main unit only) (8.8 lb.)
KV-SL1066 M2
KV-SL1056 M2 :
AC 100 – 125 V, 50/60 Hz, 0.8 A
KV-SL1056 M2 :
AC 100 – 125 V, 50/60 Hz, 0.8 A
KV-SL1066 B2
KV-SL1056 B2 :
AC 100 – 127 V, 50/60 Hz, 0.8 A
KV-SL1056 B2 :
AC 100 – 127 V, 50/60 Hz, 0.8 A
KV-SL1066 U2/K2/C2/CH
KV-SL1056 U2/K2/C2/CH
KV-SL1055 C2/CH
KV-SL1036 C2/CH
KV-SL1036 C2/CH :
KV-SL1056 U2/K2/C2/CH
KV-SL1055 C2/CH
KV-SL1036 C2/CH
KV-SL1036 C2/CH :
Power requirements
*1
KV-SL1066 U2/K2/C2/CH
KV-SL1056 U2/K2/C2/CH
KV-SL1055 C2/CH
KV-SL1036 C2/CH
KV-SL1036 C2/CH :
AC 220 – 240 V, 50/60 Hz, 0.5 A
KV-SL1056 U2/K2/C2/CH
KV-SL1055 C2/CH
KV-SL1036 C2/CH
KV-SL1036 C2/CH :
AC 220 – 240 V, 50/60 Hz, 0.5 A
Power
consumption
consumption
Scanning
36 W or less
Ready
7 W or less
Sleep
1.8 W or less
Power OFF
KV-SL1066 M2/B2
KV-SL1056 M2/B2 :
0.3 W or less
KV-SL1056 M2/B2 :
0.3 W or less
0.5 W or less
Operating environment
Temperature: 5 – 35 (41 – 95 )
Humidity: 20 % – 80 % RH
Humidity: 20 % – 80 % RH
Storage environment
Temperature: -10 – 50 (14 – 122 )
Humidity: 8 % – 75 % RH
Humidity: 8 % – 75 % RH
Interface
USB 3.1 Gen1 (backward compatible)
*1
The power requirements differ depending on the country/area. Do not use a power source that does not meet the power source
specifications marked on the unit. The power source specifications of this unit are listed on the rating name plate.
specifications marked on the unit. The power source specifications of this unit are listed on the rating name plate.
Click on the first or last page to see other KV-SL1066-M2 / KV-SL1066-U2 / KV-SL1066-B2 / KV-SL1066-K2 / KV-SL1066-C2 / KV-SL1066-CH / KV-SL1056-M2 / KV-SL1056-U2 / KV-SL1055-C2 / KV-SL1055-CH / KV-SL1036-C2 / KV-SL1055-CH / KV-SL1035-C2 / KV-SL1055-CH service manuals if exist.