Panasonic KV-S8147 / KV-S8127 / KV-S8150 / KV-S8130 / KV-S8120 Service Manual ▷ View online
7
1.3.
AC Caution
For safety, before closing the lower cabinet, please make sure of the following precautions.
1. The earth lead is fixed with the screw.
2. The AC connector is connected properly.
2. The AC connector is connected properly.
Screw
Terminal of Harness
Washer
Power Box Plate
Washer
Power Box Plate
1. Die Erdleitung ist mit der Schraube befestigt.
2. Der Wechselstromanschluss ist korrekt angeschlossen.
1.. Vorsichtshinweis zum Wechselstrom
Treffen Sie zur Sicherheit folgende Vorsichtsmaßnahmen, bevor Sie das untere Fach schließen.
Schraube
Anschluss des Kabelstrangs
Unterlegscheibe
Power Box Platte
Unterlegscheibe
Power Box Platte
8
2 Warning
2.1.
Caution
The power socket wall outlet should be located near this equipment and be easily accessible.
2.2.
About Lead Free Solder (PbF: Pb free)
Note:
In the information below, Pb, the symbol for lead in the periodic table of elements, will refer to standard solder or solder that con-
tains lead.
We will use PbF when discussing the lead free solder used in our manufacturing process which is made from Tin, (Sn), Silver,
(Ag), and Copper, (Cu).
This model, and others like it, manufactured using lead free solder will have PbF stamped on the PCB. For service and repair
work we suggest using the same type of solder.
tains lead.
We will use PbF when discussing the lead free solder used in our manufacturing process which is made from Tin, (Sn), Silver,
(Ag), and Copper, (Cu).
This model, and others like it, manufactured using lead free solder will have PbF stamped on the PCB. For service and repair
work we suggest using the same type of solder.
Caution
• PbF solder has a melting point that is 50° ~ 70° F, (30° ~ 40°C) higher than Pb solder. Please use a soldering iron with tempera-
ture control and adjust it to 700° ± 20° F, (370° ± 10°C).
Exercise care while using higher temperature soldering irons.
Do not heat the PCB for too long time in order to prevent solder splash or damage to the PCB.
Exercise care while using higher temperature soldering irons.
Do not heat the PCB for too long time in order to prevent solder splash or damage to the PCB.
• PbF solder will tend to splash if it is heated much higher than its melting point, approximately 1100°F, (600°C).
• When applying PbF solder to double layered boards, please check the component side for excess which may flow onto the
• When applying PbF solder to double layered boards, please check the component side for excess which may flow onto the
opposite side (See figure, below).
9
2.2.1.
Suggested PbF Solder
There are several types of PbF solder available commercially. While this product is manufactured using Tin, Silver, and Copper,
(Sn+Ag+Cu), you can also use Tin and Copper, (Sn+Cu), or Tin, Zinc, and Bismuth, (Sn+Zn+Bi). Please check the manufac
turer's specific instructions for the melting points of their products and any precautions for using their product with other
materials.
The following lead free (PbF) solder wire sizes are recommended for service of this product: 0.3mm, 0.6mm and 1.0mm.
(Sn+Ag+Cu), you can also use Tin and Copper, (Sn+Cu), or Tin, Zinc, and Bismuth, (Sn+Zn+Bi). Please check the manufac
turer's specific instructions for the melting points of their products and any precautions for using their product with other
materials.
The following lead free (PbF) solder wire sizes are recommended for service of this product: 0.3mm, 0.6mm and 1.0mm.
10
3 Specifications
Scanning
Item
KV-S8147/8150
KV-S8127/8120
KV-S8130
Scanning face
Duplex
Scanning method
RGB3 Line Color CIS (600 dpi)
Scanning speed
*1
•
A4 / Letter
•
Binary / color
•
200 dpi / 300 dpi
•
Landscape
Simplex
140 pages/min.
120 pages/min.
Duplex
280 images/min.
240 pages/min.
130 pages/min.
260 pages/min.
Scanning resolution
*2
100 – 600 dpi (1 dpi step), 1,200 dpi (Interpolated)
Optical: 300 dpi / 600 dpi (Automatic switch)
Optical: 300 dpi / 600 dpi (Automatic switch)
Paper
*3
Width
48 mm – 307 mm (1.9 in. – 12.09 in.)
Length
Automatic feeding:
70 mm – 432 mm (2.75 in. – 17 in.)
70 mm – 432 mm (2.75 in. – 17 in.)
Manual feeding:
70 mm – unlimited (2.75
(2.75 in. – unlimited)
70 mm – unlimited (2.75
(2.75 in. – unlimited)
*4
Manual feeding:
110 mm – unlimited
(4.33 in. – unlimited)
110 mm – unlimited
(4.33 in. – unlimited)
*4
Paper basis weight
Automatic feeding:
20 g/m² – 255 g/m² (5.2 lb. – 68 lb.)
Manual feeding:
20 g/m² – 255 g/m² (5.2 lb. – 68 lb.) ((U-turn path
(front exit))
20 g/m² – 550 g/m² (5.2 lb. – 146 lb.) (Straight path
(rear exit))
20 g/m² – 255 g/m² (5.2 lb. – 68 lb.)
Manual feeding:
20 g/m² – 255 g/m² (5.2 lb. – 68 lb.) ((U-turn path
(front exit))
20 g/m² – 550 g/m² (5.2 lb. – 146 lb.) (Straight path
(rear exit))
ADF capacity
*5
750 sheets (80 g/m² [21 lb.] A4 High-quality
woodfree paper)
500 sheets (80 g/m² [21 lb.] A3 High-quality
woodfree paper)
woodfree paper)
500 sheets (80 g/m² [21 lb.] A3 High-quality
woodfree paper)
Roller replacement
*6
600,000 sheets
*1
The scanning speed differs depending on the host computer, the operating system, the application, the measuring method, the
quantity of data in the image, and the paper type. The scanning speed depends on a measuring method of Panasonic.
quantity of data in the image, and the paper type. The scanning speed depends on a measuring method of Panasonic.
*2
When scanning a document larger than A5page 39 size at high resolutions over 600 dpi, the scanning may fail due to insufficient memory.
*3
For details, see "Compatible Paper". (See 16. Appendix (Operating Manual P.39).)
*4
Using "Long Paper", you can scan a long document to a series of split scanned images. For details about "Long Paper", refer to
the Image Capture Plus, TWAIN, or ISIS help.
the Image Capture Plus, TWAIN, or ISIS help.
*5
Use "Thin paper mode" (See 16. Appendix (Operating Manual P.28)) when scanning the document less than 40 g/m² (10.6 lb.).
*6
For details, see "Replacing the Rollers" ( See 16. Appendix (Operating Manual P. 77).)
Skew Detection sensor
5 sensors
Double Feed Retry function
Yes (by DFP Motor)
Mechanical Deskew function
Yes ( by Deskew Assist Motor (L) & (R) )
Double Feed Detection sensor
5 sensors
Memory Size
1024MB
Stapled Document Detection function
Yes
Jam Sound Detection function
Yes
3 sensors
No (No DFP Motor)
No
3 sensors
512MB
Yes
Yes
Click on the first or last page to see other KV-S8147 / KV-S8127 / KV-S8150 / KV-S8130 / KV-S8120 service manuals if exist.