DOWNLOAD Panasonic KV-S5076H / KV-S5046H Service Manual ↓ Size: 36.94 MB | Pages: 127 in PDF or view online for FREE

Model
KV-S5076H KV-S5046H
Pages
127
Size
36.94 MB
Type
PDF
Document
Service Manual
Brand
Device
Service Manual / Other / HIGH SPEED COLOR SCANNER
File
kv-s5076h-kv-s5046h.pdf
Date

Panasonic KV-S5076H / KV-S5046H Service Manual ▷ View online

10
3.2.
Control Panel and LED Indicators
Fig.3.2.1 Function of Control Panel keys and indications
Fig.3.2.2 Scanner status
Name
Operation
1
Skip button (SKIP) If you press this button after a double feed or a dog-eared document is detected and scanning has been paused,
the document that was detected as a double feed or the dog-eared document will be scanned, and then ejected
from the scanner. Scanning will continue after the document is scanned and ejected.
2
LED (Green)
Shows the scanner’s status.
3
Power button
Press the power button for more than one second to turn the unit off.
4
LCD
(KV-S5076H only)
If you are using a KV-S5076H with Image Capture Plus, you can perform push scan using the LCD.
Registered jobs are displayed on the LCD. Use the cursor button and OK button to select a job.
Also, error codes and messages corresponding to the scanner status are displayed on the LCD.
5
Cursor button
(KV-S5076H only)
6
OK button
(KV-S5076H only)
7
Start/Stop button
(START/STOP)
(1) If you set [Wait Key] for "Manual Feed Mode" in your application software, pushing this button starts 
      scanning.
(2) During scanning, pushing this button stops scanning.
(3) If you press this button after a double feed or a dog-eared document is detected and scanning has been
     paused, the document that was detected as a double feed or the dog-eared document will be ejected from 
     the scanner without being scanned. Scanning will stop.
8
LED (Red)
Lights when an error occurs.
LED (Green)
LED (Red)
Status
OFF
OFF
Power OFF
ON
OFF
Ready mode or Scanning
Blinking (Slow)
OFF
Sleep mode
OFF
ON
Error
Blinking (Fast)
OFF
Warming up
Blinking (Fast, 2 times consecutively)
OFF
Double Feed Skip mode
Blinking (Fast, 3 times consecutively)
OFF
Dog-ear Detection Skip mode
11
4 INSTALLATION
4.1.
Minimum Space Requirements
Be sure to maintain the recommended space requirements for proper ventilation.
                                    Fig.4.1.1 Dimensions for proper ventilation
                                  Top View
                                      Left-side View
12
4.2.
Included Accessories
Confirm that the following items are included with the scanner.
                                         Note
• It is highly recommended to keep the original carton and all packing materials. 
They are necessarywhen repacking.
13
4.3.
Installing Double-feed Prevention Roller
1. Remove all packing tape.
2. Push the ADF Door Release (1) upwards, and open 
    the ADF door (2).
3. Use the indents (1) to pull the double feed prevention
    roller cover towards you to open it.
4. Install the Double-feed Prevention Roller.
• Align the shaft that is shaped as indicated by (1) with the notch
in the roller mount (2), and  then insert the shaft in the notch.
Push the shaft on the opposite side (3) until it clicks into place.
Note
After you install the Double-feed Prevention Roller, make sure
that the shaft is inserted into the tab, and that the shaft will not
rotate or move. If the roller is not installed correctly, it may
cause double feeding or a paper jam.
Page of 127
Display

Click on the first or last page to see other KV-S5076H / KV-S5046H service manuals if exist.