Panasonic KV-S5076H / KV-S5046H (serv.man4) Service Manual / Supplement ▷ View online
7
KV-S5076H/KV-S5046H
Panasonic System Networks Co.,Ltd.
Be sure to operate the below steps after step 3 of disassembling for Hopper Plate Assembly in Service Manual.
2- Fix the earth cable to Main Chassis L Assy.
3- Insert the connector of Paper Sensor Cable to USR RELAY Board.
4- Put Paper Sensor Cable on the top of the batch of the cables and push the loosened Paper Sensor Cable
into the hole A, when wiring the cables.
5- Hold the batch of the cables with 2 clampers.
(OK)
(NG-01) (NG-02)
If you have any questions, please feel free to email us at
Loosening
Loosening
Batch of
Cables
Paper Sensor
Cable
Hole A
Push Paper Sensor
Cable into the hole A
No loosening
8
KV-S5076H/KV-S5046H
8.5.14. Hopper Plate Assembly
1. Remove the Double-feed Prevention Roller. (See 8.5.13.)
2. Remove the Hopper Motor. (See 8.5.9.)
3. Remove 2 screws and release 3 claws and remove
Hopper Base cover.
4. While releasing the 3 claws on the bottom of Hopper Plate
Assembly and pushing down the top of the Gate, pull and
remove the assembly forward.
remove the assembly forward.
(1) While pull the Hopper Plate Assembly forward, release
the 3 claws (Claw1).
(2) While pull the Hopper Plate Assembly upward, release
the 2 hooks to remove the assembly.
5. Lift up the Hopper plate.
9
KV-S5076H/KV-S5046H
KH
KVS5076H
KVS5046H
KVS5046H
8.5.15. Paper Sensor
6. Unhook the 2 hooks of Hopper Plate.
1. Remove the Hopper Plate. (See 8.5.14.)
2. Remove the 2 screws to release the Paper Sensor with plate
from the Hopper Plate Assembly.
3. Remove the screw to separate the sensor from the plate, and
then disconnect the Connector.
9
KV-S5076H/KV-S5046H
KH
KVS5076H
KVS5046H
KVS5046H
8.5.15. Paper Sensor
6. Unhook the 2 hooks of Hopper Plate.
1. Remove the Hopper Plate. (See 8.5.14.)
2. Remove the 2 screws to release the Paper Sensor with plate
from the Hopper Plate Assembly.
3. Remove the screw to separate the sensor from the plate, and
then disconnect the Connector.