Panasonic KV-S5055C (serv.man4) Service Manual / Supplement ▷ View online
2
TABLE OF CONTENTS
PAGE
1 TOPICS OF MAIN CHANGED CONTENTS ----------------3
2 “SECTION 2 SPECIFICATIONS”------------------------------4
3 "SECTION 3 COMPONENT IDENTIFICATION"-----------6
2 “SECTION 2 SPECIFICATIONS”------------------------------4
3 "SECTION 3 COMPONENT IDENTIFICATION"-----------6
3.1. “Section 3.2 Control Panel”------------------------------6
4 "SECTION 9 SERVICE UTILITY & SELF TEST"----------7
4.1. “Section9.1 Main Menu Indication for Service
Utility”----------------------------------------------------------7
4.2. “Section 9.2 List of Functions for Service
Utility”----------------------------------------------------------8
4.3. "Section 9.3. Operation" -------------------------------- 11
5 "SECTION 10 TROUBLESHOOTING"--------------------- 14
5.1. “Section 10.3 Requirement After Parts
Replacement” --------------------------------------------- 14
6 "SECTION 11 CIRCUIT DESCRIPTION" ------------------ 15
6.1. "Section 11.3. Explanation of Connector" ---------- 15
7 "SECTION12 SCHEMATIC DIAGRAM" ------------------- 16
7.1. "Section12.4 DRIVE Board" --------------------------- 16
7.2. "Section12.5 POWER Board" ------------------------ 20
7.2. "Section12.5 POWER Board" ------------------------ 20
8 "SECTION 13 CIRCUIT BOARD" --------------------------- 21
8.1. "Section 13.17 DRIVE Board"------------------------- 21
8.2. "Section 13.18 POWER Board" ---------------------- 23
8.2. "Section 13.18 POWER Board" ---------------------- 23
9 “SECTION 14 PARTS LOCATION AND MECHANI-
CAL PARTS LIST”----------------------------------------------- 25
9.1. “Section 14.6 Board Box” ------------------------------ 26
9.2. “Section 14.7 Packing” --------------------------------- 27
9.2. “Section 14.7 Packing” --------------------------------- 27
10 “SECTION 15 REPLACEMENT PARTS LIST” ---------- 28
10.1. "Section 15.17. DRIVE Board"------------------------ 29
10.2. "Section 15.18 POWER Board" ---------------------- 33
10.2. "Section 15.18 POWER Board" ---------------------- 33
3
1 TOPICS OF MAIN CHANGED CONTENTS
Remarks
Important level codes and Reason codes for the following changed contents
1. Important level codes
A: High
B: Middle
C: Low
2. Reason Codes
(1) Change Spec. (Product Number, Engineering change, and others)
(2) Add information on Product KV-S5055C
(3) Correction
A: High
B: Middle
C: Low
2. Reason Codes
(1) Change Spec. (Product Number, Engineering change, and others)
(2) Add information on Product KV-S5055C
(3) Correction
Section No.
(Original Service
Manual)
Contents
Reference Section
on this supplement
Remarks
2
1. Change the description of "Power consumption"
2. Add the model “India”
2. Add the model “India”
2. "SECTION 2 SPECIFICATIONS"
A-(1)
3
Change the scanner status
3. "SECTION 3 COMPONENT
IDENTIFICATION"
IDENTIFICATION"
A-(1)
9
1. Change Main Menu figure
2. Change Sleep Mode purpose
3. Add the Service Utility's menu (Download the latest
version, Save Log)
4. Add the Sleep Mode specification (regarding Standby
setting) and notes
5. Change Sleep Mode's operation for Scanner Condition
and Test
2. Change Sleep Mode purpose
3. Add the Service Utility's menu (Download the latest
version, Save Log)
4. Add the Sleep Mode specification (regarding Standby
setting) and notes
5. Change Sleep Mode's operation for Scanner Condition
and Test
4. "SECTION 9 SERVICE UTILITY
& SELF TEST"
& SELF TEST"
A-(1)
10
Add the setting after part's (IC1004 or CONTROL Board)
replacement
replacement
5. "SECTION 10
TROUBLESHOOTING"
TROUBLESHOOTING"
A-(1)
11
Change the pin arrangement between CN841 (POWER
Board) and CN4003 (DRIVE Board)
Board) and CN4003 (DRIVE Board)
6. "SECTION 11 CIRCUIT
DESCRIPTION"
DESCRIPTION"
B-(1)
12
Add the schematic diagram for DRIVE Board and POWER
Board complying with ErP directive
Board complying with ErP directive
7. "SECTION12 SCHEMATIC
DIAGRAM"
DIAGRAM"
B-(1)
13
Add the circuit boards for DRIVE Board and POWER
Board complying with ErP directive
Board complying with ErP directive
8. "SECTION 13 CIRCUIT BOARD"
B-(1)
14
Change part numbers for DRIVE Board Assembly,
POWER Board Assembly, and others
POWER Board Assembly, and others
9. "SECTION 14 PARTS
LOCATION AND MECHANICAL
PARTS LIST"
LOCATION AND MECHANICAL
PARTS LIST"
A-(1)
15
Add part numbers mounted on the DRIVE Board Assembly
and POWER Board Assembly complying with ErP directive
and POWER Board Assembly complying with ErP directive
10. "SECTION 15 REPLACEMENT
PARTS LIST"
PARTS LIST"
A-(1)
4
2 “SECTION 2 SPECIFICATIONS”
Item
Model No.
*1
KV-S5055C Series
Scanner
Scanning Face
Duplex
Scanning Method
CCD and LED for Front side
CCD and LED for Back side
CCD and LED for Back side
Scanning Width
305 mm (12.0 in.)
Readout Speed
*2
Black & White: 50 ppm / 100 ipm (A4, 300 dpi, Portrait)
Black & White: 70 ppm / 140 ipm (A4, 200 dpi, Portrait)
Color (JPEG): 50 ppm / 100 ipm (A4, 300 dpi, Portrait)
Color (JPEG): 70 ppm / 140 ipm (A4, 200 dpi, Portrait)
Black & White: 70 ppm / 140 ipm (A4, 200 dpi, Portrait)
Color (JPEG): 50 ppm / 100 ipm (A4, 300 dpi, Portrait)
Color (JPEG): 70 ppm / 140 ipm (A4, 200 dpi, Portrait)
Resolution
Main scanning direction: 100 - 600 dpi (1 dpi step)
Sub-scanning direction: 100 - 600 dpi (1 dpi step)
Optical resolution is 600 dpi.
Sub-scanning direction: 100 - 600 dpi (1 dpi step)
Optical resolution is 600 dpi.
Image Output
Binary, Grayscale, Color, MultiStream (Binary and Color, Binary and Grayscale)
Tonal Gradation
Dither (64 step gradation), Error diffusion (64 step gradation), Grayscale (8 bit), Color (24 bit)
Image Control
Image emphasis, Dynamic threshold, Automatic separation, Invert, White level from paper
Other Functions
Patch code detection (Kodak patch 2,3,T), Double feed detection
Paper
Size
48 x 70 mm (1.9 x 2.8 in.) to 297 x 432 mm (11.7 x 17 in.)
Thickness
0.04 to 0.2 mm (1.6 to 7.9 mils)
Note: 1 mil = 1 / 1000 in.
Weight
20 to 157 g/m
2
(5.3 to 41.8 lb.)
Note: 1 lb. = 3.75 g/m
2
Detection
Empty, Jam, Double-feed detection, and Bent-paper detection
Interface
USB 2.0 (Connector type: B)
Hopper Capacity
200 sheets [75 g/m
2
(20 lb.)]
Memory Size
32 MB (Standard)
Note: Additional Memory
Up to 1 GB
Unit
External Dimensions
(Width x Depth x Height)
(Width x Depth x Height)
468 x 444 x 339 mm (18.5 x 17.5 x 13.4 in.)
Weight
18 kg (40 lb.)
Power Requirement
AC 100 V to AC120 V, 50 / 60 Hz
AC 100 V to AC240 V, 50 / 60 Hz
AC 100 V to AC240 V, 50 / 60 Hz
Power
consumption
Operating
Temperature
and
Humidity
consumption
Operating
Temperature
and
Humidity
Scanning 90W or less (AC 100 V to 120 V)
85 W or less (AC220 V to 240 V)
Ready
22 W or less (AC100 V to 240 V)
Sleep
1.4 W or less (AC100 V to 240 V)
Standby
0.5 W or less (AC100 V to 240 V)
Environment Operating Temperature and
Humidity
Temperature: 15
°C to 30 °C (59 °F to 86 °F)
Humidity: 20 % to 80 %RH
Storage Temperature and
Humidity
Humidity
Temperature: 0
°C to 40 °C (32 °F to 104 °F)
Humidity: 10 % to 80 %RH
Accessories
Power cord, USB cable, Double-feed Roller Prevention Roller,Cleaning Paper, Blower,
Shading Sheet, CD-ROM (Installation Manual, Operation Manual, Device driver, ISIS, TWAIN
Image Capture Plus, Quick Scan Pro Demo, User Utility, Control Sheet, Warranty Information(U.S.A.
only)), Printed materials (Installation Manual, Safety Guide)
Shading Sheet, CD-ROM (Installation Manual, Operation Manual, Device driver, ISIS, TWAIN
Image Capture Plus, Quick Scan Pro Demo, User Utility, Control Sheet, Warranty Information(U.S.A.
only)), Printed materials (Installation Manual, Safety Guide)
PbF (Pb Free)
Applied to PCB assemblies CONTROL, DRIVE, POWER, CCD(F), CCD(B),LED, USS RELAY, USR
RELAY, USR SENSOR, SLIP DETECT SENSOR, STARTING SENSOR, USS/WAITING SENSOR,
PANEL, DFP HOME SENSOR, ENDING SENSOR, PAPER FEED SELECT SENSOR, BENT
RELAY, BENT PAPER SENSOR R(L), BENT PAPER SENSOR R(R), BENT PAPER SENSOR S(L),
and BENT PAPER SENSOR S(R) Boards
RELAY, USR SENSOR, SLIP DETECT SENSOR, STARTING SENSOR, USS/WAITING SENSOR,
PANEL, DFP HOME SENSOR, ENDING SENSOR, PAPER FEED SELECT SENSOR, BENT
RELAY, BENT PAPER SENSOR R(L), BENT PAPER SENSOR R(R), BENT PAPER SENSOR S(L),
and BENT PAPER SENSOR S(R) Boards
Note: Distinction of PbF PCB
PCBs manufactured using lead free solder will have a PbF stamp on the PCB.
Option
*3
Roller Cleaning Paper (KV-SS03)
*3
Imprinter Unit (KV-SS014)
*3
Ink Cartridge (KV-SS021)
*4
Roller Exchange Kit (KV-SS039)
Flatbed Scanner (KV-SS080)
5
Note:
*1
: KV-S5055C Series
*2
: The scanning speed depends on the test environment. In addition, it differs depending on the host computer operating
environment or applications.
*3
: KV-SSxxx (All Area except for China)
KV-SSxxx-CN (Only for China)
(xxx: 03, 014, or 021)
(xxx: 03, 014, or 021)
*4
: KV-SS039
(Except for Europe, Russia, China, and India)
KV-SS039-U (For Europe and Russia)
KV-SS039-CN (For China)
KV-SS039-CN (For China)
KV-SS039-SX (For India)
Model
Area
Serial No.
Power Cord
KV-S5055C
USA
D36 xxxx 1001
For 100 to 120 V
KV-S5055C-J
USA (made in Japan) D56 xxxx 1001
For 100 to 120 V
KV-S5055C-U
Europe, Russia
D50 xxxx 1001
For 220 to 240 V
KV-S5055C-K
Korea
D53 xxxx 1001
For 220 to 240 V
KV-S5055C-T
Taiwan
D54 xxxx 1001
For 100 to 120 V
KV-S5055C-CN
China
D57 xxxx 1001
For 220 to 240 V
KV-S5055C-B
Brasil
D52 xxxx 1001
For 220 to 240 V
KV-S5055C-SX
India
D66 xxRD xxxx
For 220 to 240 V
