DOWNLOAD Panasonic KV-S5055C (serv.man2) Service Manual ↓ Size: 8.38 MB | Pages: 127 in PDF or view online for FREE

Model
KV-S5055C (serv.man2)
Pages
127
Size
8.38 MB
Type
PDF
Document
Service Manual
Brand
Device
Service Manual / Other / HIGH SPEED COLOR SCANNER
File
kv-s5055c-sm2.pdf
Date

Panasonic KV-S5055C (serv.man2) Service Manual ▷ View online

5
1.4.
For Service Technicians
ICs and LSIs are vulnerable to static electricity.
When repairing, the following precautions will help to prevent recurring malfunctions.
1. Cover plastic parts with aluminum foil.
2. Ground soldering irons.
3. Use a conductive mat on the worktable.
4. Do not hold IC or LSI pins with bare fingers.
1.5.
About Lead Free Solder (PbF: Pb free)
Note
• In the information below, Pb, the symbol for lead in the periodic table of elements, will refer to standard solder or solder
that contains lead.
• We will use PbF when discussing the lead free solder used in our manufacturing process which is made from Tin (Sn),
Silver (Ag), and Copper (Cu).
• This model, and others like it, manufactured using lead free solder will have PbF stamped on the PCB. For service and
repair work we suggest using the same type of solder.
Distinction of PbF PCB
• PCBs manufactured using lead free solder will have a PbF stamp on the PCB.
Caution
• PbF solder has a melting point that is 50 
° - 70 °F, (30 ° - 40 °C) higher than Pb solder. 
Use a soldering iron with temperature control and adjust it to 700 
° ± 20 °F (370 ° ± 10 °C).
• Exercise care when using higher temperature soldering irons: Do not heat the PCB for too long time in order to
prevent solder splash or damage to the PCB.
• PbF solder will tend to splash if it is heated much higher than its melting point, approximately 1100 
°F (600 °C). 
• When applying PbF solder to double layered boards, check the component side for excess solder which may flow onto
the opposite side (See figure below).
1.5.1.
Suggested Pb free solder
We recommend you to use the following solder when re-soldering components for repair. Before using other Pb free solder than the
following solder, make sure to confirm that the solder maker (you use) has the license agreement for Pb free solder.
Supplier: Senju Metal Industry Co., Ltd. (http://www.senju-m.co.jp)
Part Description in Senju: EcoSolder RMA02 P3 M705 Series
1.6.
About RoHS
This product is fully compliant with the national laws transposed from the EU Directive on the restriction of the use of certain
hazardous substances (RoHS) in electrical and electronic equipment, effective 1st July 2006 in the EU countries.
In order for the product to comply with the RoHS Directive, the six particular substances (lead, mercury, cadmium, hexavalent
chromium, polybrominated biphenyls, and polybrominated diphenyl ethers) have been either totally eliminated or limited to the
concentration level below maximum allowed. Consequently spare parts have been changed to RoHS-compliant parts where
applicable.
Due to the application of RoHS legislation to spare parts, non-compliant spare parts cannot be used to repair compliant products put
on the EU market on or after 1st July 2006. Therefore make sure to order and use RoHS-compliant spare parts listed in this
manual.
6
2 SPECIFICATIONS
Item
Model No.
*1
 KV-S5055C Series 
Scanner
Scanning Face
Duplex
Scanning Method
CCD and LED for Front side
CCD and LED for Back side
Scanning Width
305 mm (12.0 in.)
Readout Speed 
*2
  
Black & White: 50 ppm / 100 ipm (A4, 300 dpi, Portrait)
Black & White: 70 ppm / 140 ipm (A4, 200 dpi, Portrait)
Color (JPEG): 50 ppm / 100 ipm (A4, 300 dpi, Portrait)
Color (JPEG): 70 ppm / 140 ipm (A4, 200 dpi, Portrait)
Resolution
Main scanning direction: 100 - 600 dpi (1 dpi step)
Sub-scanning direction: 100 - 600 dpi (1 dpi step)
Optical resolution is 600 dpi.
Image Output
Binary, Grayscale, Color, MultiStream (Binary and Color, Binary and Grayscale)
Tonal Gradation
Dither (64 step gradation), Error diffusion (64 step gradation), Grayscale (8 bit), Color (24 bit)
Image Control
Image emphasis, Dynamic threshold, Automatic separation, Invert, White level from paper
Other Functions
Patch code detection (Kodak patch 2,3,T), Double feed detection
Paper
Size
48 x 70 mm (1.9 x 2.8 in.) to 297 x 432 mm (11.7 x 17 in.)
 
Thickness
0.04 to 0.2 mm (1.6 to 7.9 mils)   
Note: 1 mil = 1 / 1000 in.
Weight
20 to 157 g/m
2
 (5.3 to 41.8 lb.)
Note: 1 lb. = 3.75 g/m
2
Detection
Empty, Jam, Double-feed detection, and Bent-paper detection
Interface 
USB 2.0 (Connector type: B)
Hopper Capacity
200 sheets [75 g/m
2
 (20 lb.)]
Memory Size
32 MB (Standard)
Note: Additional Memory
Up to 1 GB
Unit
External Dimensions
 (Width x Depth x Height)
468 x 444 x 339 mm (18.5 x 17.5 x 13.4 in.)
Weight
18 kg (40 lb.)
Power Requirement
AC 100 V to AC120 V, 50 / 60 Hz
AC 100 V to AC240 V, 50 / 60 Hz
Power
consumption
Maximum 
(Scanning)
1.0 A (AC 100 V to 120 V)
0.5 A (AC 220 V to 240 V)
Minimum 
(Standby)
0.4 A (AC 100 V to 120 V)
0.2 A (AC 220 V to 240 V)
Sleep Mode 3.5 W or less (AC 100 V to 120 V)
3.5 W or less (AC 220 V to 240 V)
Environment Operating Temperature and
Humidity
Temperature: 15 
°C to 30 °C (59 °F to 86 °F)
Humidity: 20 % to 80 %RH
Storage Temperature and
Humidity
Temperature: 0 
°C to 40 °C (32 °F to 104 °F)
Humidity: 10 % to 80 %RH
Accessories
Power cord, USB cable, Double-feed Roller Prevention Roller,Cleaning Paper, Blower, 
Shading Sheet, CD-ROM (Installation Manual, Operation Manual, Device driver, ISIS, TWAIN
Image Capture Plus, Quick Scan Pro Demo, User Utility, Control Sheet, Warranty Information(U.S.A. 
only)), Printed materials (Installation Manual, Safety Guide)
PbF (Pb Free)
Applied to PCB assemblies CONTROL, DRIVE, POWER, CCD(F), CCD(B),LED, USS RELAY, USR 
RELAY, USR SENSOR, SLIP DETECT SENSOR, STARTING SENSOR, USS/WAITING SENSOR, 
PANEL, DFP HOME SENSOR, ENDING SENSOR, PAPER FEED SELECT SENSOR, BENT 
RELAY, BENT PAPER SENSOR R(L), BENT PAPER SENSOR R(R), BENT PAPER SENSOR S(L), 
and BENT PAPER SENSOR S(R) Boards 
Note: Distinction of PbF PCB
PCBs manufactured using lead free solder will have a PbF stamp on the PCB.
Option
*3
 Roller Cleaning Paper (KV-SS03)
*3
 Imprinter Unit (KV-SS014)
*3 
Ink Cartridge (KV-SS021)
*4 
Roller Exchange Kit (KV-SS039)
   Flatbed Scanner (KV-SS080)
7
     Note:
         
*1
: KV-S5055C Series
          
      
*2
: The scanning speed depends on the test environment. In addition, it differs depending on the host computer operating
            environment or applications.
      
      
*3
: KV-SSxxx (All Area except for China)
            KV-SSxxx-CN (Only for China)
              (xxx: 03, 014, or 021)
 
      
*4
: KV-SS039 (Except for Europe, Russia, and, China)
            KV-SS039-U (For Europe and Russia)
            KV-SS039-CN (For China)
Model
Area
Serial No.
Power Cord
KV-S5055C
USA
D36 xxxx 1001
For 100 to 120 V
KV-S5055C-J
USA (made in Japan) D56 xxxx 1001
For 100 to 120 V
KV-S5055C-U
Europe, Russia
D50 xxxx 1001
For 220 to 240 V
KV-S5055C-K
Korea
D53 xxxx 1001
For 220 to 240 V
KV-S5055C-T
Taiwan
D54 xxxx 1001
For 100 to 120 V
KV-S5055C-CN
China
D57 xxxx 1001
For 220 to 240 V
KV-S5055C-B
Brasil
D52 xxxx 1001
For 220 to 240 V
8
3 COMPONENT IDENTIFICATION
3.1.
Main Part Names and Locations 
Page of 127
Display

Click on the first or last page to see other KV-S5055C (serv.man2) service manuals if exist.