Panasonic KV-S4065CL / KV-S4065CW / KV-S4085CL / KV-S4085CW Service Manual / Supplement ▷ View online
7
Note:
*1
: KV-S4065CL Series
Note:
*2
: KV-S4065CW Series
*3
: The scanning speed depends on the test environment. In addition, it differs depending on the host computer operating
environment or applications.
*4
: MultiStream is a trademark of EMC corporation.
*5
: KV-SSxxx (All Area except for China)
KV-SSxxx-CN (Only for China)
(xxx: 033, 03, 014, or 021)
(xxx: 033, 03, 014, or 021)
Model
Area
Serial No.
Power Cord
KV-S4065CL
USA
A02 xxxx 1001
For 100 to 120 V
KV-S4065CL-U
Europe
A32 xxxx 1001
For 220 to 240 V
KV-S4065CL-B
Brazil
D25 xxRM xxxx
For 220 to 240 V
KV-S4065CL-J
USA
D29 xxRM xxxx
For 100 to 120 V
Model
Area
Serial No.
Power Cord
KV-S4065CW
USA
A01 xxxx 1001
For 100 to 120 V
KV-S4065CW-U
Europe
A27 xxxx 1001
For 220 to 240 V
KV-S4065CW-A
Australia
A51 xxxx 1001
For 220 to 240 V
KV-S4065CW-K
Korea
A28 xxxx 1001
For 220 to 240 V
KV-S4065CW-T
Taiwan
A29 xxxx 1001
For 100 to 120 V
KV-S4065CWCN
China
A30 xxxx 1001
For 220 to 240 V
KV-S4065CW-B
Brazil
D24 xxRM xxxx
For 220 to 240 V
KV-S4065CW-J
USA
D28 xxRM xxxx
For 100 to 120 V
8
3 "SECTION 3 COMPONENT IDENTIFICATION"
3.1.
“Section 3.2 Control Panel”
9
4 "SECTION 9 SERVICE UTILITY & SELF TEST"
4.1.
“Section 9.1 Main Menu Indication for Service Utility”
This section describes the functions of the service utility software, such as adjustments, diagnosis, configuration and maintenance.
This utility software also includes the functions contained in the User Utility software enclosed in the scanner.
Executing “ServiceUtility.exe” will allow you to operate all the functions found in this service utility software.
Note
This utility software also includes the functions contained in the User Utility software enclosed in the scanner.
Executing “ServiceUtility.exe” will allow you to operate all the functions found in this service utility software.
Note
• This utility software is not included with the scanner. Please call service or technical support to obtain the utility
software.
• This software should be used only by an authorized service technician. Improper use of this software may cause
damage to the scanner.
10
4.2.
List of Functions for Service Utility
Service Utility item list is as follows.
Note:
When two or more scanners are connected to a PC, execute “Select Scanner” to specify the scanner before evaluating.
The procedure is as follows.
1. Click “Select Scanner” on the main menu.
2. Select the product number of the scanner to evaluate.
The procedure is as follows.
1. Click “Select Scanner” on the main menu.
2. Select the product number of the scanner to evaluate.
Item
Purpose
Remarks
Scanner Status
*2
Used to indicate scanner status (Ready, Error, or Caution)
2
Scanner Information
*2
Used to indicate scanner information such as Model, firmware
version, board revision, memory size, interface, Interface
condition, etc.
version, board revision, memory size, interface, Interface
condition, etc.
2
Scanner Counter Update All Counters
*2
Used to update the values of System Counter, Cleaning Roller
Counter, and Replacing Roller Counter
Counter, and Replacing Roller Counter
1, 6
Clear Counter
(After Clean Roller)
(After Clean Roller)
*2
Used to reset the Roller Cleaning Counter to zero after cleaning
the rollers
the rollers
1, 6
Clear Counter
(After Replace Roller)
(After Replace Roller)
*2
Used to reset the Roller Replacement Counter to zero after
replacing the rollers
replacing the rollers
1, 6
Scanner Condition Sleep Mode
*2
1. Used to set “Waiting Time” before entering the Sleep Mode
2. Used to set “Waiting Time” before entering the
Standby Mode
Standby Mode
1
Clean Imprinter
*1 *2
Used to clean the ink jet head of the imprinter
6
Buzzer Setting
*2
Used to set the Buzzer ON/OFF condition
1
User Shading
*2
Used to execute shading correction at the user side, or to restore
the shading data to the default (Factory-setting)
the shading data to the default (Factory-setting)
4
Caution Setting
*2
Used to set the number of the document scanning that enables
the Service Utility to inform the caution information (roller
replacement timing and roller cleaning timing)
the Service Utility to inform the caution information (roller
replacement timing and roller cleaning timing)
1, 3
Set Default
1. Used to set “Sleep Mode”
(Sleep and Standby)
,
“Caution Setting”, and “Feed Speed” to the default
2. Used to set “Thickness”, “ADF”, and “Hopper” on the
Control Panel to the default
Thickness: Standard
ADF: Auto
Hopper: Low (300 sheets)
2. Used to set “Thickness”, “ADF”, and “Hopper” on the
Control Panel to the default
Thickness: Standard
ADF: Auto
Hopper: Low (300 sheets)
3
Click on the first or last page to see other KV-S4065CL / KV-S4065CW / KV-S4085CL / KV-S4085CW service manuals if exist.