Panasonic KV-S1057C / KV-S1027C / KV-SL1066 / KV-SL1056 / KV-SL1055 / KV-SL1036 / KV-SL1035 Service Manual ▷ View online
29
7.3.4.
AUTO/MANUAL DETECTION Board
7.3.5.
CIS (B)
(1) Remove the Top Cover. (See
Top Cover
(
P.26
))
(2) Remove the Polyslider.
(3) Slide the DFP Release Shaft in the direction of the arrow.
(4) Remove the screw B.
(3) Slide the DFP Release Shaft in the direction of the arrow.
(4) Remove the screw B.
(5) Lift up the shaft in the direction of the arrow.
(6) Remove the AUTO/MANUAL DETECTION Board, while
(6) Remove the AUTO/MANUAL DETECTION Board, while
unlocking the hook.
(7) Disconnect the connector.
(1) Remove Top Cover. (See
Top Cover
(
P.26
))
(2) Unlock the Hook (arrow
1
), while pushing the boss of the
CIS (B) Assembly (arrow
2
).
(3) Remove CIS (B) Assembly (arrow
3
).
(4) Disconnect the FFC cable from the connector of the CIS (B).
(5) Remove the CIS Cover B with 2 CIS Springs, while releasing
(5) Remove the CIS Cover B with 2 CIS Springs, while releasing
the 9 hooks.
(6) Remove CIS (B) from Scanning Glass (B).
Polyslider
DFP Release Shaft
B
Boss
Hook
AUTO/MANUAL DETECTION Board
CIS Cover B
Hooks
CIS Spring
CIS (B) Connector
CIS (B)
Scanning Glass (B)
Scanning Glass (B)
Hook
Boss of
CIS (B)
CIS (B)
1
3
2
30
7.3.6.
Reference Plate (F)
7.3.7.
Free Roller
(1) Remove CIS (B). (See
CIS (B)
(
P.29
))
(2) Remove Lock Spring 1.
(3) Remove the polyslider and Reshuffling Lever.
(4) Remove Reference Plate from the Scanning Glass (B).
(3) Remove the polyslider and Reshuffling Lever.
(4) Remove Reference Plate from the Scanning Glass (B).
(1) Remove 4 screws B.
(2) Remove the Reinforcement Plate.
(2) Remove the Reinforcement Plate.
(3) Remove 6 springs.
(4) Remove 4 Free Rollers with the shafts and the Free Roller
(4) Remove 4 Free Rollers with the shafts and the Free Roller
Guide.
Reassembling Note:
Install 2 pcs of the Free Roller Guide after installing the Free
Roller as follows.
(1) Insert the tab of the Free Roller Guide under the Upper
Roller as follows.
(1) Insert the tab of the Free Roller Guide under the Upper
Frame (arrow
1
).
(2) Lock the hooks of the guide to the shaft of the roller
(arrow
2
).
Reference Plate (F)
Lock Spring 1
Scanning Glass (B)
Polyslider
Reshuffling Lever
B
Reinforcement Plate
Free Roller Guide
1
2
2
Tab
Free Roller Spring 2
Free Roller Spring 2
Free Roller Spring
Free Roller Spring
Free Roller
31
7.3.8.
Wiring of Upper Chassis
32
7.4.
Lower Chassis 1
7.4.1.
Paper Feed Roller
7.4.2.
CIS (F)
(1) Remove the Paper Feed Roller Assembly. (See
Appendix
(
Operating Manual
P.63)
)
(2) Push the tab (arrow
1
) to remove the Feed Roller.
(3) Remove the rollers (arrow
2
) from the shaft.
Reassembling Note:
Make sure the left (white) and right (black) paper feed rollers are
installed correctly.
installed correctly.
(1) Remove the Back Cover. (See
Back Cover
(
P.26
))
(2) Open the ADF door.
(3) Remove screw C.
(3) Remove screw C.
(4) Unlock the 3 hooks.
(5) Remove the Scanning Glass (F).
(5) Remove the Scanning Glass (F).
(6) Remove CIS (F) (arrow
1
and then
2
) and disconnect the
FFC cable.
Feed Roller
2
1
2
2
Tab
C
Scanning Glass (F)
ADF Door
Hook
CIS (F)
2
1
White
Black
Click on the first or last page to see other KV-S1057C / KV-S1027C / KV-SL1066 / KV-SL1056 / KV-SL1055 / KV-SL1036 / KV-SL1035 service manuals if exist.