Panasonic KV-S1037X Service Manual ▷ View online
9
General
*1
The power requirements differ depending on the country/area. Do not use a power source that does not meet the power source
specifications marked on the unit. The power source specifications of this unit are listed on the rating name plate.
*2
If connected to a network device (hub, router, etc.) that supports IEEE802.3az. security.
*3
To assure continued emission limit compliance, use only shielded LAN cable. The cable should be a CAT 5 (Category 5) or
higher for 10Base-T / 100Base-TX, or CAT 5e (Enhanced Category 5) or higher for 1000Base-T.
*4
The actual line speed may be different depending on the network environment and the wireless devices connected.
*5
Depending on the wireless router (wireless access point) used, connections may not be possible between the unit and
the wireless router. When connecting with 802.11n, select WPA-PSK (AES) or WPA2-PSK (AES) for security.
Item
KV-S1037X-M/-U/-X/-CN/-ML
External dimensions
(Width x Depth x Height)
(Width x Depth x Height)
303 mm × 177 mm × 137 mm (12.0 in. × 7.0 in. × 5.4 in.)
Weight
2.7kg (5.9 lb.)
Power requirements
*1
AC 100 – 240 V, 50/60 Hz
Power
consumption
consumption
Scanning
26 W or less (DC 16 V 1.5 A)
Ready
6 W or less
Sleep
2.0 W or less (USB connection)
2.0 W or less (Wired LAN connection)
2.0 W or less (Wired LAN connection)
*2
2.0 W or less (Wireless LAN connection)
Power OFF
0.3 W or less
Operating environment
Temperature: 5 - 35
o
C (41 - 95
o
F)
Humidity: 20 - 80%RH
Storage environment
Temperature: -10 - 50
o
C (14 - 122
o
F)
Humidity: 8 - 75%RH
Interface
USB3.1 Gen 1 (backward compatible)
LAN (10Base-T / 100Base-TX / 1000Base-T)
*3
Wireless LAN (IEEE802.11n/g/b)
Recommended web browser
Internet Explorer 11
Mozilla Firefox (latest version)
Google Chrome (latest version)
Mozilla Firefox (latest version)
Google Chrome (latest version)
Wireless LAN
Communication
standard
standard
IEEE802.11n/g/b
Frequency range
(center frequency) /
Channel
Channel
KV-S1037X-U / KV-S1037X-X / KV-S1037X-CN / KV-S1037X-ML:
2.412 GHz – 2.472 GHz (1 – 13ch)
KV-S1037X-M:
2.412 GHz – 2.462 GHz (1 – 11ch)
2.412 GHz – 2.472 GHz (1 – 13ch)
KV-S1037X-M:
2.412 GHz – 2.462 GHz (1 – 11ch)
Data transfer rate
*4
IEEE802.11n: 6.5 – 150 Mbps
IEEE802.11g: 6 – 54 Mbps
IEEE802.11b: 1 – 11 Mbps
IEEE802.11g: 6 – 54 Mbps
IEEE802.11b: 1 – 11 Mbps
Access method
Station mode / Simple AP mode
Security
*5
WPA/WPA2-PSK (TKIP/AES) / Open System (WEP64/WEP128)
WPS
PBC method (push button method)
RF output power
IEEE802.11n: 13 dBm ± 1 dB
IEEE802.11g: 13 dBm ± 1 dB
IEEE802.11b: 17 dBm ± 1 dB
IEEE802.11g: 13 dBm ± 1 dB
IEEE802.11b: 17 dBm ± 1 dB
Indicator of radio
field intensity (RSSI
level)
field intensity (RSSI
level)
Signal levels:
> -65dBm: Good
> -82dBm: Marginal - Can be used under certain conditions
< -82dBm: Unreliable
> -82dBm: Marginal - Can be used under certain conditions
< -82dBm: Unreliable
Option
Roller exchange kit (KV-SS058)
Roller cleaning paper (KV-SS03)
Carrier sheet (KV-SS077)
Roller cleaning paper (KV-SS03)
Carrier sheet (KV-SS077)
10
Model Suffix and serial No.
Model
Area
Serial No.
KV-S1037X-M
North America, Latin America, Asia
H60XXXX1001
KV-S1037X-U
Europe, Asia, Middle East, Africa
H57XXXX1001
KV-S1037X-X
Latin America, CIS, Asia, Middle East, Africa
H59XXXX1001
KV-S1037X-CN
China
H61XXXX1001
KV-S1037X-ML
Malaysia
H72XXXX1001
11
4 Location of Controls and Components
4.1.
Main Unit
4.1.1.
Front
Document guides
Door open button
: Used to open the ADF door.
ADF door
Exit tray
Exit extension tray 1
Exit extension tray 2
Exit support
Used if paper curls and cannot be fed properly when scanning thin paper.
Refer to 16. Appendix (Operating Manual P.33).
Refer to 16. Appendix (Operating Manual P.33).
Operation panel
For details, see "Operation Panel". Refer to 16. Appendix (Operating Manual P.21).
Shows the unit's status. For details, see "About LED". Refer to 16. Appendix (Operating Manual P.22).
Guidance sticker
You can write the information registered on the single touch scan button here.
Mixed batch card guide
When the unit is shipped, this is pre-installed and fixed to the unit. For details, see "Mixed Batch Card Guide".
Refer to 16. Appendix (Operating Manual P.38).
Refer to 16. Appendix (Operating Manual P.38).
1
2
3
3
5
4
6
7
8
9
10
11
12
13
14
Feed tray
: Load the documents with the surface to be scanned facing down.
: Make sure to remove paper clips and staples from documents.
Feed extension tray
Manual feed selector
You can select the document feeding method from automatic feeding or manual feeding.
For details, see "Using Manual feeding". Refer to 16. Appendix (Operating Manual P.37).
For details, see "Using Manual feeding". Refer to 16. Appendix (Operating Manual P.37).
LED
(Red) / LED
(Green) / LED
(Green)
12
4.1.2.
Rear
Security slot
Use a commercially available security cable.
Power connector
Power cord
AC adaptor
2
3
1
4
5
6
7
8
9
Wireless LAN ON/OFF switch
You can turn the wireless LAN function on and off. While the wireless LAN ON/OFF switch
is on, the wired LAN function is not available. Turn the unit's power off and then on again
after switching. Refer to 16. Appendix (Operating Manual P.23)
is on, the wired LAN function is not available. Turn the unit's power off and then on again
after switching. Refer to 16. Appendix (Operating Manual P.23)
USB cable
Connect the USB cable to the scanner and the other end of the USB cable to the computer.
LAN cable (not supplied)
To assure continued emission limit compliance, use only shielded LAN cable. The cable
should be a CAT 5 (Category 5) or higher for 10Base-T / 100Base-TX, or CAT 5e
(Enhanced Category 5) or higher for 1000Base-T.
should be a CAT 5 (Category 5) or higher for 10Base-T / 100Base-TX, or CAT 5e
(Enhanced Category 5) or higher for 1000Base-T.
LAN connector
USB connector
Click on the first or last page to see other KV-S1037X service manuals if exist.