DOWNLOAD Panasonic KV-S1037 / KV-S1038 / KV-S1026C-M2 / KV-S1026C-J2 Service Manual ↓ Size: 11.38 MB | Pages: 127 in PDF or view online for FREE

Model
KV-S1037 KV-S1038 KV-S1026C-M2 KV-S1026C-J2
Pages
127
Size
11.38 MB
Type
PDF
Document
Service Manual
Brand
Device
Service Manual / Other / DOCUMENT SCANNER
File
kv-s1037-kv-s1038-kv-s1026c-m2-kv-s1026c-j2.pdf
Date

Panasonic KV-S1037 / KV-S1038 / KV-S1026C-M2 / KV-S1026C-J2 Service Manual ▷ View online

3
14.1. CONTROL Board-----------------------------------------90
14.1.1. Front Side----------------------------------------------90
14.1.2. Back Side ----------------------------------------------91
14.2. SENSOR Board-------------------------------------------92
14.2.1. PANEL Board -----------------------------------------92
14.2.2. DOOR DETECTION Board -----------------------92
14.2.3. PAPER SENSOR Board ---------------------------93
14.2.4. STARTING SENSOR Board ----------------------93
15 Exploded View and Replacement Parts List -----------95
15.1. Exterior ------------------------------------------------------96
15.2. Upper chassis ---------------------------------------------98
15.3. Lower chassis ------------------------------------------- 100
15.4. Packing---------------------------------------------------- 102
15.5. Screw ------------------------------------------------------ 104
15.6. Tool--------------------------------------------------------- 105
15.7. CONTROL Board--------------------------------------- 106
15.8. Sensor Board -------------------------------------------- 113
15.8.1. PANEL Board --------------------------------------- 113
15.8.2. DOOR DETECTION Board --------------------- 113
15.8.3. PAPER SENSOR Board ------------------------- 113
15.8.4. STARTING SENSOR Board -------------------- 113
16 Appendix --------------------------------------------------------- 114
4
1 Safety Precautions
1. Before servicing, unplug the AC power cord to prevent an electric shock.
2. When replacing parts, use only the manufacturer's recommended components.
3. Check the condition of the power cord. Replace if wear or damage is evident.
4. After servicing, be sure to restore the lead dress, insulation barriers, insulation papers, shields, etc.
5. Before returning the serviced equipment to the customer, be sure to perform the following insulation resistance test to prevent
the customer from being exposed to shock hazards.
1.1.
For Service Technicians 
• Repair service shall be provided in accordance with repair technology information such as service manual so as to prevent fires,
injury or electric shock, which can be caused by improper repair work.
1. When repair services are provided, neither the products nor their parts or members shall be remodeled.
2. If a lead wire assembly is supplied as a repair part, the lead wire assembly shall be replaced.
3. FASTON terminals shall be plugged straight in and unplugged straight out.
• ICs and LSIs are vulnerable to static electricity.
When repairing, the following precautions will help prevent recurring malfunctions.
1. Cover plastic parts boxes with aluminum foil.
2. Ground the soldering irons.
3. Use a conductive mat on worktable.
4. Do not grasp IC or LSI pins with bare fingers.
5
2 Warning
2.1.
Caution
The power socket wall outlet should be located near this equipment and be easily accessible.
2.2.
About Lead Free Solder (PbF: Pb free)
Note:
In the information below, Pb, the symbol for lead in the periodic table of elements, will refer to standard solder or solder that 
contains lead.
We will use PbF when discussing the lead free solder used in our manufacturing process which is made from Tin, (Sn), Silver, 
(Ag), and Copper, (Cu).
This model, and others like it, manufactured using lead free solder will have PbF stamped on the PCB. For service and repair 
work we suggest using the same type of solder. 
Caution
• PbF solder has a melting point that is 50° ~ 70° F, (30° ~ 40°C) higher than Pb solder. Please use a soldering iron with 
temperature control and adjust it to 700° ± 20° F, (370° ± 10°C). 
Exercise care while using higher temperature soldering irons.
Do not heat the PCB for too long time in order to prevent solder splash or damage to the PCB.
• PbF solder will tend to splash if it is heated much higher than its melting point, approximately 1100°F, (600°C).
• When applying PbF solder to double layered boards, please check the component side for excess which may flow onto the 
opposite side (See figure, below).
6
2.2.1.
Suggested PbF Solder
There are several types of PbF solder available commercially. While this product is manufactured using Tin, Silver, and Copper,
(Sn+Ag+Cu), you can also use Tin and Copper, (Sn+Cu), or Tin, Zinc, and Bismuth, (Sn+Zn+Bi). Please check the 
manufacturer's specific instructions for the melting points of their products and any precautions for using their product with other 
materials. 
The following lead free (PbF) solder wire sizes are recommended for service of this product: 0.3mm, 0.6mm and 1.0mm.
Page of 127
Display

Panasonic KV-S1037 / KV-S1038 / KV-S1026C-M2 / KV-S1026C-J2 Service Manual ▷ Download

  • DOWNLOAD Panasonic KV-S1037 / KV-S1038 / KV-S1026C-M2 / KV-S1026C-J2 Service Manual ↓ Size: 11.38 MB | Pages: 127 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Panasonic KV-S1037 / KV-S1038 / KV-S1026C-M2 / KV-S1026C-J2 in PDF for free, which will help you to disassemble, recover, fix and repair Panasonic KV-S1037 / KV-S1038 / KV-S1026C-M2 / KV-S1026C-J2 Service Manual / Other. Information contained in Panasonic KV-S1037 / KV-S1038 / KV-S1026C-M2 / KV-S1026C-J2 Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.