Panasonic KV-S1026C / KV-S1015C (serv.man2) Service Manual ▷ View online
8
Note:
*1
: KV-S1015C Series
*2
: MultiStream is a trademark of EMC Corporation.
*3
: The scanning speed differs depending on the host computer, operating system, application, measuring method,
the data quantity of the image, and paper type. The scanning speed was measured using a proprietary method.
*4
: Only applied to KV-S1015C-U and KV-S1015C-X
Model
Area
Serial No.
KV-S1015C-M
USA, Canada
F52XXXX1001
KV-S1015C-U
Europe, Asia, Center and South America
F68XXXX1001
KV-S1015C-B
Brazil
F72XXXX1001
KV-S1015C-CN
China
F76XXXX1001
KV-S1015C-K
Korea
F70XXXX1001
KV-S1015C-X
Russia
F92XXXX1001
KV-S1015C-SX
India
F74XXXX1001
9
3 COMPONENT IDENTIFICATION
3.1.
Main Unit
10
3.2.
Display Panel
(1) LED (Red)
(2) LED
(Green)
Note:*
On automatic power-off mode, this unit's power will automatically turn off if no operation is performed
for a half hour or more.
for a half hour or more.
*Power OFF: (Factory setting)
For KV-S1026C-U / S1015C-U: 30 min.
Except for KV-S1026C-U/ S1015C-U: Disable
For KV-S1026C-U / S1015C-U: 30 min.
Except for KV-S1026C-U/ S1015C-U: Disable
(3) Power button ( )
Push the this button for more than one second to turn the unit off.
(4) Skip button (KV-S1026C Series Only)
If you push this button when a double feed occurs, the document that was detected as a double feed will be scanned, and scan-
ning will continue.
ning will continue.
(5) Single touch scan button 1 to 3
You can register an application to each button, which allows you to open an application and scan a document.
For details about registering applications, refer to "Operating Manual for KV-S1026C / S1015C".
For details about registering applications, refer to "Operating Manual for KV-S1026C / S1015C".
(6) START/STOP button
• If you set [Wait Key] for "Manual Feed Mode" ** in your application, the scanning starts by pushing this button.
If the unit is in sleep mode, push the Start / Stop button to return to ready mode first.
• When pushing this button during scanning, this scanning will stop.
• If you push this button when a double feed occurs, the document that was detected as a double feed will not be scanned. The
• If you push this button when a double feed occurs, the document that was detected as a double feed will not be scanned. The
scanning will stop.
Note: "Manual Feed Mode" **
Note: "Manual Feed Mode" **
For details on "Manual Feed Mode", refer to the help for Image Capture Plus.
(1) LED (Red)
(2) LED (Green)
Status
OFF
OFF
* Power Off
OFF
ON
Ready or Scanning
OFF
Blink (Fast)
Warming up
OFF
Blink (Slow)
Sleep
OFF
Blink (2 times consecutively) Error (Double-feed Detection)
ON
OFF
Error
Blink (Slow)
ON
Caution
11
4 INSTALLATION
4.1.
Minimum Space Requirements
Be sure to maintain the recommended space requirements for proper ventilation.
Click on the first or last page to see other KV-S1026C / KV-S1015C (serv.man2) service manuals if exist.