Panasonic KV-S1026C / KV-S1015C (serv.man2) Service Manual ▷ View online
3
1 GENERAL PRECAUTIONS
1.1.
Safety Precautions
1. Before servicing, unplug the power cord to prevent electrical shock hazard.
2. When replacing parts, use only manufacture’s recommended components for safety.
3. Check the condition of power cord. Replace if wear or damage is evident.
2. When replacing parts, use only manufacture’s recommended components for safety.
3. Check the condition of power cord. Replace if wear or damage is evident.
4. After servicing, be sure to restore the wire dressing, insulation barriers, insulation papers, shields, etc.
1.2.
Standard for Repair Service
Repair service shall be provided in accordance with repair technology information such as service manual
so as to prevent fires, injury or electric shock, which can be caused by improper repair work.
so as to prevent fires, injury or electric shock, which can be caused by improper repair work.
1. When performing repairs, neither the products nor its parts or components shall be modified.
2. If cable assembly is supplied as the smallest unit when servicing, make sure to replace
2. If cable assembly is supplied as the smallest unit when servicing, make sure to replace
the cable assembly.
1.3.
For Service Technicians
ICs and LSIs are vulnerable to static electricity.
When repairing, the following precautions will help to prevent recurring malfunctions.
When repairing, the following precautions will help to prevent recurring malfunctions.
1. Cover the plastic parts with aluminum foil.
2. Ground the soldering irons.
3. Use a conductive mat on the worktable.
4. Do not grasp IC or LSI pins with bare fingers.
2. Ground the soldering irons.
3. Use a conductive mat on the worktable.
4. Do not grasp IC or LSI pins with bare fingers.
1.4.
About Lead Free Solder (PbF: Pb free)
Note
• In the information below, Pb, the symbol for lead in the periodic table of elements, will refer to standard solder or solder
that contains lead.
• We will use PbF when discussing the lead free solder used in our manufacturing process which is made from Tin (Sn),
Silver (Ag), and Copper (Cu).
• This model, and others like it, manufactured using lead free solder will have PbF stamped on the PCB. For service and
repair work we suggest using the same type of solder.
Distinction of PbF PCB
• PCBs (manufactured) using lead free solder will have a PbF stamp on the PCB.
Caution
• PbF solder has a melting point that is 50
° - 70 °F, (30 ° - 40 °C) higher than Pb solder.
Please use a soldering iron with temperature control and adjust it to 700
° ± 20 °F (370 ° ± 10 °C).
• Exercise care while using higher temperature soldering irons.: Do not heat the PCB for too long time in order to
prevent solder splash or damage to the PCB.
• PbF solder will tend to splash if it is heated much higher than its melting point, approximately 1100
°F (600 °C).
• When applying PbF solder to double layered boards, please check the component side for excess solder which may
flow onto the opposite side (See figure below)
4
1.4.1.
Suggested Pb free solder
We recommend you to use the following solder when re-soldering components for repair. Before using other Pb free solder than the
following solder, make sure to confirm that the solder maker (you use) has the license agreement for Pb free solder.
following solder, make sure to confirm that the solder maker (you use) has the license agreement for Pb free solder.
Supplier: Senju Metal Industry Co., Ltd. (http://www.senju-m.co.jp)
Part Description in Senju: EcoSolder RMA02 P3 M705 Series
Part Description in Senju: EcoSolder RMA02 P3 M705 Series
1.5.
About RoHS
This product is fully compliant with the national laws transposed from the EU Directive on the restriction of the use of certain
hazardous substances (RoHS) in electrical and electronic equipment, effective 1st July 2006 in the EU countries.
hazardous substances (RoHS) in electrical and electronic equipment, effective 1st July 2006 in the EU countries.
In order for the product to comply with the RoHS Directive, the six particular substances (lead, mercury, cadmium, hexavalent
chromium, polybrominated biphenyls, and polybrominated diphenyl ethers) have been either totally eliminated or limited to the
concentration level below maximum allowed. Consequently spare parts have been changed to RoHS-compliant parts where
applicable.
Due to spare parts application of RoHS legislation, non-compliant spare parts cannot be used to repair compliant products put on
the EU market on or after 1st July 2006. Please therefore make sure to order and use RoHS-compliant spare parts listed in this
manual.
chromium, polybrominated biphenyls, and polybrominated diphenyl ethers) have been either totally eliminated or limited to the
concentration level below maximum allowed. Consequently spare parts have been changed to RoHS-compliant parts where
applicable.
Due to spare parts application of RoHS legislation, non-compliant spare parts cannot be used to repair compliant products put on
the EU market on or after 1st July 2006. Please therefore make sure to order and use RoHS-compliant spare parts listed in this
manual.
5
2 SPECIFICATIONS
2.1.
KV-S1026C
Item
Model No.
*1
KV-S1026C Series
Scanner
Scanning Face
Duplex
Scanning Method
CIS for Front & Back sides
Background: Black
Background: Black
Scanning Width
216 mm (8.5 in.)
*3
Scanning Speed
30 ppm / 60 ipm (Black and White, A4 Portrait, 200 dpi)
20 ppm / 40 ipm (Color, A4 Portrait, 200 dpi)
20 ppm / 40 ipm (Color, A4 Portrait, 200 dpi)
Resolution
300 dpi or 600 dpi
Tonal Gradation
Binary, Grayscale, Color,
*2
MultiStream
TM
(Binary and Color, Binary and Grayscale)
Image Control
Image emphasis, Dynamic threshold, Automatic separation, Invert, White level from paper
Compression
JPEG (Color, Grayscale)
Paper
Size
48 x 70 mm (1.9 x 2.8 in.) to 216 x 2,540 mm (8.5 x 100 in.)
Thickness
0.04 to 0.2 mm (1.6 to 7.9 mils)
Note: 1 mil = 1 / 1000 in.
Weight
20 to 209 g/m
2
(5.4 to 55 lb.)
Note: 1 lb. = 3.7597 g/m
2
Detection
No paper, Jam, Double-feed detection
Card
(ISO Format)
(ISO Format)
Size
85.6 x 54.0 mm (3.4 x 2.1 in.)
Thickness
0.76 mm (0.03 in.)
Detection
No paper, Jam
Interface
USB 2.0 (Connector type: B) x 1 ch
Feed Tray Capacity
50 sheets [80 g/m
2
(20 lb.) New Paper]
Exit Tray Capacity
50 sheets [80 g/m
2
(20 lb.) New Paper]
Unit
External Dimensions
(Width x Depth x Height)
(Width x Depth x Height)
303 x 177 x 137 mm (12.0 x 7.0 x 5.4 in.)
Note: When Exit Tray and Feed Tray are closed
Note: When Exit Tray and Feed Tray are closed
Weight
2.7 kg (6.0 lb.)
Power Requirement
External power supply (AC Adaptor)
AC 100 V to AC 240 V, 50 / 60 Hz
AC 100 V to AC 240 V, 50 / 60 Hz
Power
Consumption
Consumption
Maximum
(Scanning)
(Scanning)
17 W
Ready
4.5 W or less
Sleep Mode 1.6 W or less
When the
Power
Switch is
OFF
When the
Power
Switch is
OFF
0.3 W or less (While AC Adaptor is connected to the AC outlet)
Environment Operating Temperature and
Humidity
Temperature: 10
°C to 35 °C (50 °F to 95 °F)
Humidity: 20 % to 80 %RH
Storage Temperature and
Humidity
Humidity
Temperature: 0
°C to 40 °C (32 °F to 104 °F)
Humidity: 10 % to 80 %RH
Included Accessories
AC Adaptor, Power cord, USB cable, DVD-ROM, Printed material (Quick Reference Guide, Safety
Guide),
Guide),
*4
Guidance Sticker, Correction Sticker, Mixed Batch Card Guide
PbF (Pb Free)
Applied to PCB assemblies CONTROL, PANEL, DOOR DETECTION, PAPER SENSOR, START-
ING SENSOR, ULTRASONIC SENSOR (R), and ULTRASONIC SENSOR (G) Boards
ING SENSOR, ULTRASONIC SENSOR (R), and ULTRASONIC SENSOR (G) Boards
Note: Distinction of PbF PCB
PCBs manufactured using lead free solder will have a PbF stamp on the PCB.
Option
Roller Exchange Kit (KV-SS058)
Roller Cleaning Paper (KV-SS03)
Flatbed Scanner (KV-SS081)
Roller Cleaning Paper (KV-SS03)
Flatbed Scanner (KV-SS081)
6
Note:
*1
: KV-S1026C Series
*2
: MultiStream is a trademark of EMC Corporation.
*3
: The scanning speed differs depending on the host computer, operating system, application, measuring method,
the data quantity of the image, and paper type. The scanning speed was measured using a proprietary method.
*4
: Only applied to KV-S1026C-U and KV-S1026C-X
Model
Area
Serial No.
KV-S1026C-M
USA, Canada
F51XXXX1001
KV-S1026C-J
USA, Canada
F79XXXX1001
KV-S1026C-U
Europe, Asia, Center and South America
F67XXXX1001
KV-S1026C-B
Brazil
F71XXXX1001
KV-S1026C-CN
China
F75XXXX1001
KV-S1026C-K
Korea
F69XXXX1001
KV-S1026C-X
Russia, Asia, Center and South America
F91XXXX1001
KV-S1026C-SX
India
F73XXXX1001