Panasonic KV-S1025C / KV-S1020C Service Manual / Supplement ▷ View online
2
1 TOPICS OF MAIN CHANGED CONTENTS
Remarks
Important level codes and Reason codes for the following changed contents
1. Important level codes
A: High
B: Middle
C: Low
2. Reason Codes
(1) Change Spec. (Product Number, Engineering change, and others)
(2) Add information on Products KV-S1025C / S1020C
(3) Correction
A: High
B: Middle
C: Low
2. Reason Codes
(1) Change Spec. (Product Number, Engineering change, and others)
(2) Add information on Products KV-S1025C / S1020C
(3) Correction
Section No.
(Original Service
Manual)
Contents
Reference Section
on this supplement
Remarks
2
1. Change the model No. for Roller Exchange Kit.
2. Add new destinations and others
2. Add new destinations and others
2. "SECTION 2
SPECIFICATIONS"
SPECIFICATIONS"
B-(1)
B-(2)
B-(2)
3
1. Change the expression from “Warning” to “Caution”
3. “SECTION 3
COMPONENT
IDETIFICATION”
COMPONENT
IDETIFICATION”
B-(1)
7
1. Change the replacement cycle for the Double-feed Prevention Roller
2. Change the model No. for Roller Exchange Kit.
3. Change “Clear Counter” operation of the roller replacement
2. Change the model No. for Roller Exchange Kit.
3. Change “Clear Counter” operation of the roller replacement
4. "SECTION 7
MAINTENANCE"
MAINTENANCE"
B-(1)
9
1. Change the Service Utility's main menu
2. Unify the "Clear Counter (After Replace Roller)" operation
3. Change the item name from "Warning Setting" to "Caution Setting"
4. Change the Status Massage of the replaceable rollers and others.
5. Change the message contents while operating "Caution Setting"
and "Set Default"
6. Change the default for roller replacement timing
7. Change the expression for explanation of each adjustment
2. Unify the "Clear Counter (After Replace Roller)" operation
3. Change the item name from "Warning Setting" to "Caution Setting"
4. Change the Status Massage of the replaceable rollers and others.
5. Change the message contents while operating "Caution Setting"
and "Set Default"
6. Change the default for roller replacement timing
7. Change the expression for explanation of each adjustment
5. "SECTION 9
SERVICE UTILITY &
SELF TEST"
SERVICE UTILITY &
SELF TEST"
B-(1)
10
1. Change “Clear Counter” operation of the roller replacement
6. “SECTION10
TROUBLESHOOTING”
TROUBLESHOOTING”
14
1. Change part numbers for mechanical parts
7. “SECTION14
PARTS LOCATION AND
MECHANICAL PARTS
LIST”
PARTS LOCATION AND
MECHANICAL PARTS
LIST”
A-(1)
15
1. Change part numbers for electrical parts
8. “SECTION15
REPLACEMENT PARTS
LIST”
REPLACEMENT PARTS
LIST”
A-(1)
3
2 “SECTION 2 SPECIFICATIONS”
2.1.
“Section 2.1 KV-S1025C Series”
Item
Model No.
*1
KV-S1025C Series
Scanning
Scanning face
Duplex
Scanning method
CCD for Front and Back sides
Background: Black
Background: Black
Scanning width
218 mm (8.58 in.)
*4
Scanning speed
Black & White: 25 ppm / 50 ipm (A4, 200 dpi)
Color: 25 ppm / 50 ipm (A4, 200 dpi)
Color: 25 ppm / 50 ipm (A4, 200 dpi)
Resolution
Main scanning direction: 100 to 600 dpi (1 dpi step)
Sub scanning direction: 100 to 600 dpi (1 dpi step)
The optical resolution: 600 dpi
Sub scanning direction: 100 to 600 dpi (1 dpi step)
The optical resolution: 600 dpi
Image output
Binary, Grayscale, Color,
*5
MultiStream (Binary & Gray, Binary &
Color)
Image control
Dynamic threshold, Automatic separation, Image emphasis, Invert,
White level from paper
White level from paper
Compression
JPEG (Color, Grayscale)
Paper
Size
48 x 70 mm (1.89 x 2.76 in.) to 216 x 2540 mm (8.5 x 100 in.)
Thickness
0.05 to 0.2 mm (2.0 to 7.9 mil/s)
Note: 1 mil = 1/1000 in.
Note: 1 mil = 1/1000 in.
Weight
40 to 209 g/m
2
(11 to 55 lb.)
Note: 1 lb. = 3.7597 g/m
2
Detection
No paper, Jam, Double-feed detection (detects length of documents)
Interface
USB2.0 (connector type: B)
Feed tray capacity
50 sheets (80 g/m
2
(20 lb.) New paper)
Exit Tray capacity
50 sheets (80 g/m
2
(20 lb.) New paper)
Unit
External dimensions
(Width x Height x Depth)
(Width x Height x Depth)
317 x 196 x 218 mm (12.5 x 7.8 x 8.6 in.)
(When closing the Exit Tray with Stand and no Feed Tray)
(When closing the Exit Tray with Stand and no Feed Tray)
Weight
4.2 kg (9.3 lb.)
Power requirement
*2
AC 100-120 V, 50/60 Hz (to AC Adaptor)
*3
AC 220-240 V, 50/60 Hz (to AC Adaptor)
Power
consumption
consumption
Maximum
(Scanning
mode)
(Scanning
mode)
32 W
Minimum
(Idle mode)
(Idle mode)
22 W
Sleep mode
7 W or less
When the Power
Switch is OFF
Switch is OFF
Approx. 1 W (While AC Adaptor is connected to the AC outlet)
Environment Operating temperature and
Humidity
Temperature: 15
°C to 30 °C (59 °F to 86 °F)
Humidity: 30 % to 80 %RH
Storage temperature and Humidity Temperature: 0
°C to 35 °C (32 °F to 95 °F)
Humidity: 10 % to 80 %RH
Accessories
AC Adaptor, Power Cord, USB cable, Feed Tray, CD-ROM, Printed
material (Installation Guide)
material (Installation Guide)
PbF (Pb Free)
Applied to PCB assemblies CONTROL, PANEL, CCD (F), CCD (B),
DOOR DETECTION, PAPER SENSOR, and STARTING SENSOR
Boards
Note: Distinction of PbF PCB
PCBs (manufactured) using lead free solder will have a
PbF stamp on the PCB.
DOOR DETECTION, PAPER SENSOR, and STARTING SENSOR
Boards
Note: Distinction of PbF PCB
PCBs (manufactured) using lead free solder will have a
PbF stamp on the PCB.
Option
Roller exchange kit
(KV-SS035)
Roller cleaning paper (KV-SS03)
4
Note:
*1
: KV-S1025C Series
KV-S1025C: for USA
KV-S1025C-G: for Russia, etc.
KV-S1025C-U: for Europe
KV-S1025C-R: for Russia
KV-S1025C-K: for Korea
KV-S1025C-A: for Australlia
KV-S1025C-CN: for China
KV-S1025C-K: for Korea
KV-S1025C-A: for Australlia
KV-S1025C-CN: for China
KV-S1025C-T: for Taiwan
KV-S1025C-B: for Brazil
KV-S1025C-J: for GSA (made in Japan for USA)
KV-S1025C-J: for GSA (made in Japan for USA)
SERIAL No. shown on the name plate on each scanner will distinguish the destinations for each area as follows.
1. SERIAL No. for USA
→ 853 xxxx xxxx
2. SERIAL No.
for Russia, etc.
→ 858 xxxx xxxx
3. SERIAL No.
for Europe
→ 856 xxxx xxxx
4. SERIAL No. for Russia
→ 859 xxxx xxxx
5. SERIAL No. for Korea
→ 860 xxxx xxxx
6. SERIAL No. for Australlia
→ 857 xxxx xxxx
7. SERIAL No. for China
→ 861 xxxx xxxx
8. SERIAL No. for Taiwan
→ 862 xxxx xxxx
9. SERIAL No. for Brazil
→
D33 xxxx xxxx
10. SERIAL No. for GSA
→
C05 xxxx xxxx
(x: Don't care)
*2
: Applied to KV-S1025C for USA and other countries where power supply (AC100 to 120 V) is used
*3
: Applied to KV-S1025C-G/-U/-R/-K/-A/-CN/
-B/-GSA
for German, UK, Russia, Korea, Australlia, China,
Brazil,
and other
countries where power supply (AC220 to 240 V) is used.
*4
: The scanning speed depends on the test environment. In addition, it differs depending on the host computer operating
environment or applications.
*5
: MultiStream is registered trademark or trademark of EMC Corporation.
5
3 “SECTION 3 COMPONENT IDENTIFICATION”
Scanner status
Note: Stand-by Process
In the following cases, it will take 30 seconds to be able to scan.
Case 1: Just after power-on
Case 2: After about 2 hours pass by in the sleep mode
Case 3: After about 5 seconds or more pass by with ADF Door open
Case 1: Just after power-on
Case 2: After about 2 hours pass by in the sleep mode
Case 3: After about 5 seconds or more pass by with ADF Door open
LED
Scanner Status
Remarks
Green Red
ON
OFF
Ready
Blink (Slow)
OFF
Sleep
ON
Blink (Slow)
Caution
For cleaning or
replacing roller
replacing roller
Blink (Slow)
Blink (Slow)
Caution
in Sleep
For cleaning or
replacing roller
replacing roller
ON
ON
Error
Blink (Fast)
OFF
Warming Up
