DOWNLOAD Panasonic EP-MA73 / EP-MA73KU892 (serv.man2) Service Manual ↓ Size: 6.91 MB | Pages: 88 in PDF or view online for FREE

49

7. Remove one Push-turn rivet, which installs the Seat.

8. Lift the Seat and remove five Push-turn rivets on the

Frame, and remove the Seat.

9. Open the zippers on the Seat, and remove the Seat air

bags.

1. Remove the Armrest.
2. Remove the Side cover.
3. Remove the Elbow base.
4. Remove the Seat side unit.
5. Remove the Seat.
6. Turn on the switch and lift the Ottoman to the highest

point with the Controller.

7. Remove one Brushclip and ten Push-turn rivets, which

install the Under cover front.
Caution

• Rotate the Ottoman with the Ottoman rotation lever so

that the work would be easy when removing Push-turn
rivets.

50

1. Remove the Armrests.
2. Remove the Side cover.
3. Remove the Elbow bases.
4. Remove the Leg covers.
5. Removing the Seat side unit.
6. Remove the Seat.
7. Remove the Under cover front.
8. Remove one screw on the L-shaped 3-row joint on the

Under box top left.

9. Remove three screws on the right of the Under box top

right, and remove the Under box with attention to five
hooks.

10. Pull out all the Hoses connected to the Under box top left.

• Be careful not to bend pipes of the Electromagnetic

valve.

• Be careful of the arrangement of the Hoses when install-

ing them.

11. Remove three screws on left, and remove the Under box.

12. Remove four Under box bottom fixing screws, and take

out the Under box bottom from front.

1. Remove the Rear cover.

• Work after moving the Massage mechanism block to the

lowest position.

2. Remove the Armrests.
3. Remove the Side cover.
4. Remove the Elbow bases.
5. Remove the Seat side units.
6. Remove the Seat. (Procedures 1-4)

51

7. Fasten one clamp each on right/left sides with pliers on

one Hose each on right/left sides of the Hip air bags.

8. Remove two Brushclips each on right/left sides, and

remove the Hip air bag.

1. Remove the Armrests.
2. Remove the Side covers.
3. Remove the Elbow bases.
4. Remove the Seat side units.
5. Remove the Seat.
6. Remove the Under cover front.

7. Lift the Ottoman, and remove four Hoses and one Con-

nector, which are connected to the Ottoman.

8. Pull the Ottoman rotation lever and rotate the ottoman,

and remove two screws each on right/left sides, which
install the inner sides of the Ottoman base covers.

52

9. Remove the Ottoman base cover with care to five Hooks

on right and seven Hooks on left.

10. Remove four screws each on right/left sides, which install

the Rotation shaft, and remove the Ottoman.

11. Pull out the tip of the zippers and cut Cable ties, and open

the zippers.  Remove five J-shaped hooks and open the
Cover.
Caution

• When in assembly, pass the tips of the zippers though

the hole of the rubber. Bind the left tip of the zippers with
a Cable tie.

12. Remove four screws and remove the Cushion.

13. Pull out the tip of the zippers and cut Cable ties, and open

the zippers.

14. Remove six screws, which install the Foot under cover,

and remove the Cover.