Panasonic EP-MA51 / EP-MA51CX800 Service Manual ▷ View online
EP-MA51
ORDER NO. HPD0908A16C3
-
10 -
6.2 Removing the Outside parts
1.Proceed all the procedures of 6.1. Removing the Armrest.
2.Remove 10 Push-turn rivets, and remove the Lift protection
sheet.
Caution in assembly
Be aware that six Push-turn rivets (*) are different from
others.
3.Remove two Push-turn rivets on the Under cover right.
Similarly on the right side, too.
4.Remove five Push-turn rivets, and remove the Under cover
right/left.
Remove the Power source switch box before removing the
Under cover right.
EP-MA51
ORDER NO. HPD0908A16C3
-
11 -
5.Unscrew the Screws, which fix the Outside cover (1ps outside,
3pcs inside, 2pcs on the back).
When unscrew the Screw outside, slide the Under cover.
6.Remove the Outside cover to the outside.
Caution in assembly
Be sure to check if two Air hoses are in the ribs firmly and they
are not bent when installing the Outside cover.
EP-MA51
ORDER NO. HPD0908A16C3
-
12 -
Install the Power cord as the figure.
7.Unscrew five Screws and remove the Armrest fixing frame from
the Inside
cover.
8.Remove the Seat hose and the Right connecting hose from the
joint.
9.Unscrew three Screws, and remove the Inside cover from the
Under pipe.
EP-MA51
ORDER NO. HPD0908A16C3
-
13 -
Caution in assembly
When installing the Inside cover, install the Air hose as the
figure not to make it bent or hooked.
Caution in assembly
When installing the Under cover, be sure to check if Air hoses
are not hooked nor bent, and move the Ottoman to check if no
hoses are pulled. And install the Controller cord as the figure.
10.Unscrew six Screws, and remove the Leg cover right/left.
11.Unscrew six Screws, and remove the Seat rear cover.
Click on the first or last page to see other EP-MA51 / EP-MA51CX800 service manuals if exist.