Panasonic SDR-S10P / SDR-S10PC / SDR-S10PL / SDR-S10E / SDR-S10EB / SDR-S10EE / SDR-S10EF / SDR-S10EG / SDR-S10EP / SDR-S10GC / SDR-S10GN / SDR-S18GK Service Manual ▷ View online
29
Adjustment Items
• Adjustment item as follows.
The adjustment instruction is available at "Software download" on the "Support Information from NWBG/VDBG-PAVC" web-site
in "TSN System".
in "TSN System".
30
10 Factory Setting
10.1. HOW TO TURN ON THE FACTORY SETTINGS?
1. Set the mode dial “Video playback“ mode.
2. While keep pressing the “[LEFT<] of cursor” button, “record” button and “delete” button for more than 3 seconds until the top
2. While keep pressing the “[LEFT<] of cursor” button, “record” button and “delete” button for more than 3 seconds until the top
screen of the Service Menu being displayed.
3. Under the condition of the Item No.”2” is yellow high lighted, press the “[RIGHT>] of cursor“ button.
4. By pressing the “[UP ^] of cursor” button, then press the “[center] of cursor” button.
5. After few seconds “OK” is displayed on LCD monitor. Turn off the power as a completion of the “FACTORY SETTINGS”.
4. By pressing the “[UP ^] of cursor” button, then press the “[center] of cursor” button.
5. After few seconds “OK” is displayed on LCD monitor. Turn off the power as a completion of the “FACTORY SETTINGS”.
10.2. WHAT IS THE FACTORY SETTINGS?
The factory settings clean up and/or refresh the following settings.
1. The OSD MENU setting data.
2. Deletion only for all scene files in a card and format of the MPEG2 file system area.
3. Reset the folder number and file number of still pictures.
2. Deletion only for all scene files in a card and format of the MPEG2 file system area.
3. Reset the folder number and file number of still pictures.
(Setting the folder number is 100, and file number is 0.)
4. Clear the mechanism lock information.
5. Clear the service mode information contents.
5. Clear the service mode information contents.
The setting position of factory settings:
Name
Setting position
Mode select switch
AUTO
Mode dial
OFF
S-1
S1. About Indication of The Schematic Diagram ............................ S-1
S1.1. Important Safety Notice......................................................... S-1
S1.1. Important Safety Notice......................................................... S-1
S2. Voltage Chart ........................................................................... S-2
S2.1. Monitor P.C.B. ....................................................................... S-2
S2.2. Front P.C.B. ........................................................................... S-2
S2.1. Monitor P.C.B. ....................................................................... S-2
S2.2. Front P.C.B. ........................................................................... S-2
S3. Block Diagram .......................................................................... S-3
S3.1. Overall Block Diagram .......................................................... S-3
S3.1. Overall Block Diagram .......................................................... S-3
S4. Schematic Diagram .................................................................. S-4
S4.1. Interconnection Diagram ....................................................... S-4
S4.2. Jack Schematic Diagram ...................................................... S-5
S4.3. Monitor Schematic Diagram .................................................. S-6
S4.4. Front Schematic Diagram ..................................................... S-7
S4.5. CCD FPC Schematic Diagram .............................................. S-7
S4.1. Interconnection Diagram ....................................................... S-4
S4.2. Jack Schematic Diagram ...................................................... S-5
S4.3. Monitor Schematic Diagram .................................................. S-6
S4.4. Front Schematic Diagram ..................................................... S-7
S4.5. CCD FPC Schematic Diagram .............................................. S-7
S5. Print Circuit Board .................................................................... S-8
S5.1. Jack P.C.B. ............................................................................ S-8
S5.1. Jack P.C.B. ............................................................................ S-8
S5.2. Monitor P.C.B. ....................................................................... S-9
S5.2.1. Monitor P.C.B. (Component Side) ...................................... S-9
S5.2.2. Monitor P.C.B. (Foil Side) ................................................. S-10
S5.3. Front P.C.B. ......................................................................... S-11
S5.4. CCD FPC P.C.B. ................................................................. S-12
S5.2.1. Monitor P.C.B. (Component Side) ...................................... S-9
S5.2.2. Monitor P.C.B. (Foil Side) ................................................. S-10
S5.3. Front P.C.B. ......................................................................... S-11
S5.4. CCD FPC P.C.B. ................................................................. S-12
S6. Replacement Parts List .......................................................... S-13
S7. Exploded View ....................................................................... S-19
S7.1. Frame and Casing Section.................................................. S-19
S7.2. LCD Section ........................................................................ S-20
S7.3. Camera Lens Section.......................................................... S-21
S7.4. Packing Parts and Accessories Section .............................. S-22
S7.1. Frame and Casing Section.................................................. S-19
S7.2. LCD Section ........................................................................ S-20
S7.3. Camera Lens Section.......................................................... S-21
S7.4. Packing Parts and Accessories Section .............................. S-22
Table of contents
Service Manual
VM0703034CE
Diagrams and Replacement
Parts List
Vol. 1
(K)...........Black Type
Colour
Model No.
SDR-S10P
SDR-S10PC
SDR-S10PL
SDR-S10E
SDR-S10EB
SDR-S10EE
SDR-S10P
SDR-S10PC
SDR-S10PL
SDR-S10E
SDR-S10EB
SDR-S10EE
SDR-S10EF
SDR-S10EG
SDR-S10EP
SDR-S10GC
SDR-S10GN
SDR-S18GK
SDR-S10EG
SDR-S10EP
SDR-S10GC
SDR-S10GN
SDR-S18GK
SD Video Camera
Name of Signal
OFTR
FEP
This signal is connected
to the FEP schematic diagram.
to the FEP schematic diagram.
Circuit name being connected.
6.Use the parts number indicated on the Replacement Parts List .
7.Indication on Schematic diagrams:
5.The voltage being indicated here may be include observational-error (deviation) due to
internal-resistance and/or reactance of equipment. Therefore, handle the value
indicated on here as reference.
indicated on here as reference.
4.Although the voltage and waveform available on here is measured with standard frame,
it may be differ from actual measurement due to modification of circuit and so on.
3.The voltage being indicated on the schematic diagram is measured in
"Standard-Playback" mode when there is no specify mode is mentioned.
2.It is only the "Test Round" and no terminal (Pin) is available on the P.C.B.
when the TP (Test Point) indicated as " " mark.
1.Although reference number of the parts is indicated on the P.C.B. drawing and/or
schematic diagrams, it is NOT mounted on the P.C.B. when it is displayed with "$" mark.
FOR SAFETY. WHEN REPLACING ANY OF THESE COMPONENTS USE ONLY THE SAME TYPE.
COMPONENTS IDENTIFIED WITH THE MARK
HAVE THE SPECIAL CHARACTERISTICS
S1. About Indication of The Schematic Diagram
S1.1. Important Safety Notice
S-2
S2. Voltage Chart
S2.1. Monitor P.C.B.
Note) Indicated voltage values are the standard values for the unit measured by the DC electronic circuit tester (high-impedance) with the chassis taken as standard.
Therefore, there may exist some errors in the voltage values, depending on the internal impedance of the DC circuit tester.
REF No.
PIN No.
POWER ON
Q8101
E
0.7
Q8101
C
1.7
Q8101
B
1.5
Q8102
E
0.7
Q8102
C
1.7
Q8102
B
1.5
Q8104
E
0.7
Q8104
C
1.7
Q8104
B
1.5
Q8105
E
0.7
Q8105
C
1.7
Q8105
B
1.5
Q8107
E
1.7
Q8107
C
0
Q8107
B
1
Q8108
E
0.7
Q8108
C
1.7
Q8108
B
1.5
Q8112
E
1.5
Q8112
C
0
Q8112
B
0.7
Q8113
E
0
Q8113
C
-6.6
Q8113
B
0.1
S2.2. Front P.C.B.
REF No.
PIN No.
POWER ON
IC4801
1
2.9
IC4801
2
2.9
IC4801
3
2.9
IC4801
4
0
IC4801
5
2.9
IC4801
6
2.9
IC4801
7
2.9
IC4801
8
5.5
Q4801
E
4.9
Q4801
C
5.5
Q4801
B
5.8
Q6501
E
3.2
Q6501
C
3.5
Q6501
B
0.6
Q6502
E
2.5
Q6502
C
0
Q6502
B
3.2
Click on the first or last page to see other SDR-S10P / SDR-S10PC / SDR-S10PL / SDR-S10E / SDR-S10EB / SDR-S10EE / SDR-S10EF / SDR-S10EG / SDR-S10EP / SDR-S10GC / SDR-S10GN / SDR-S18GK service manuals if exist.