Panasonic SDR-H80P / SDR-H80PC / SDR-H80EG / SDR-H80EE / SDR-H80EB / SDR-H80EP / SDR-H80EF / SDR-H80EC / SDR-H80GC / SDR-H80GN / SDR-H80GJ / SDR-H80GK / SDR-H80PU / SDR-H80PR / SDR-H81EE / SDR-H81EB / SDR-H90P / SDR-H90PC / SDR-H90EG / SDR-H90EE / SDR-H90EB / SDR-H Service Manual ▷ View online
2.3. Caution for AC Cord
(For EB/GC)
2.3.1. Information for your safety
IMPORTANT
Your attention is drawn to the fact that recording of pre-
recorded tapes or discs or other published or broadcast
material may infringe copyright laws.
recorded tapes or discs or other published or broadcast
material may infringe copyright laws.
WARNING
To reduce the risk of fire or shock hazard, do not expose
this equipment to rain or moisture.
this equipment to rain or moisture.
CAUTION
To reduce the risk of fire or shock hazard and annoying
interference, use the recommended accessories only.
interference, use the recommended accessories only.
FOR YOUR SAFETY
DO NOT REMOVE THE OUTER COVER
To prevent electric shock, do not remove the cover. No user
serviceable parts inside. Refer servicing to qualified service
personnel.
To prevent electric shock, do not remove the cover. No user
serviceable parts inside. Refer servicing to qualified service
personnel.
2.3.2. Caution for AC mains lead
For your safety, please read the following text carefully.
This appliance is supplied with a moulded three-pin mains plug
for your safety and convenience.
A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that the
replacement fuse has a rating of 5 amperes and it is approved
by ASTA or BSI to BS1362
Check for the ASRA mark or the BSI mark on the body of the
fuse.
for your safety and convenience.
A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that the
replacement fuse has a rating of 5 amperes and it is approved
by ASTA or BSI to BS1362
Check for the ASRA mark or the BSI mark on the body of the
fuse.
If the plug contains a removable fuse cover you must ensure
that it is refitted when the fuse is replaced.
If you lose the fuse cover, the plug must not be used until a
replacement cover is obtained.
A replacement fuse cover can be purchased from your local
Panasonic Dealer.
that it is refitted when the fuse is replaced.
If you lose the fuse cover, the plug must not be used until a
replacement cover is obtained.
A replacement fuse cover can be purchased from your local
Panasonic Dealer.
If the fitted moulded plug is unsuitable for the socket outlet in
your home then the fuse should be removed and the plug cut
off and disposed of safety.
There is a danger of severe electrical shock if the cut off plug
is inserted into any 13-ampere socket.
your home then the fuse should be removed and the plug cut
off and disposed of safety.
There is a danger of severe electrical shock if the cut off plug
is inserted into any 13-ampere socket.
If a new plug is to be fitted please observe the wiring code as
shown below.
If in any doubt, please consult a qualified electrician.
shown below.
If in any doubt, please consult a qualified electrician.
2.3.2.1. Important
The wires in this mains lead are coloured in accordance with
the following code:
the following code:
Blue
Neutral
Brown
Live
As the colours of the wires in the mains lead of this appliance
may not correspond with the coloured markings identifying the
terminals in your plug, proceed as follows:
may not correspond with the coloured markings identifying the
terminals in your plug, proceed as follows:
The wire which is coloured BLUE must be connected to the
terminal in the plug which is marked with the letter N or
coloured BLACK.
terminal in the plug which is marked with the letter N or
coloured BLACK.
The wire which is coloured BROWN must be connected to the
terminal in the plug which is marked with the letter L or coloured
RED.
terminal in the plug which is marked with the letter L or coloured
RED.
Under no circumstances should either of these wires be
connected to the earth terminal of the three pin plug, marked
with the letter E or the Earth Symbol.
connected to the earth terminal of the three pin plug, marked
with the letter E or the Earth Symbol.
2.3.2.2. Before use
remove the Connector Cover as follows.
2.3.2.3. How to replace the Fuse
1. Remove the Fuse Cover with a screwdriver.
2. Replace the fuse and attach the Fuse cover.
6
SDR-H80P
2.4. How to Replace the Lithium Battery (PROCEDURE)
1. Remove the LCD BL P.C.B.. (Refer to Disassembly Procedures.)
2. Remove the Lithium Battery “ML-614S/ZTE” and then replace the new one. (See .)
2. Remove the Lithium Battery “ML-614S/ZTE” and then replace the new one. (See .)
Fig. B1
Note:
The lithium battery is a critical component. (Type No.: ML-614S/ZTE Manufactured by Panasonic.)
It must never be subjected to excessive heat or discharge.
It must therefore only be fitted in equipment designed specifically for its use.
Replacement batteries must be of the same type and manufacture.
They must be fitted in the same manner and location as the original battery, with the correct polarity contacts observed.
Do not attempt to re-charge the old battery or re-use it for any other purpose.
It should be disposed of in waste products destined for burial rather than incineration.
It must never be subjected to excessive heat or discharge.
It must therefore only be fitted in equipment designed specifically for its use.
Replacement batteries must be of the same type and manufacture.
They must be fitted in the same manner and location as the original battery, with the correct polarity contacts observed.
Do not attempt to re-charge the old battery or re-use it for any other purpose.
It should be disposed of in waste products destined for burial rather than incineration.
7
SDR-H80P
2.5. How to Recycle the Lithium Battery (U.S. Only)
8
SDR-H80P
3 Service Navigation
3.1. Service Information
This service manual contains technical information which will allow service personnel´s to understand and service this model.
Please place orders using the parts list and not the drawing reference numbers.
If the circuit is changed or modified, this information will be followed by supplement service manual to be filed with original service
manual.
Notes 1:
Please place orders using the parts list and not the drawing reference numbers.
If the circuit is changed or modified, this information will be followed by supplement service manual to be filed with original service
manual.
Notes 1:
1. VSK0697 is indicated on AC Adapter used on the following models:
SDR-H80P/PC, H90P/PC.
However, the AC Adapter replacement part number is DE-A51BB which should be used when ordering.
However, the AC Adapter replacement part number is DE-A51BB which should be used when ordering.
2. VSK0698 is indicated on AC Adapter used in the following models:
SDR-H80EG/EB/EP/EF/EC/EE/GC/GN/GJ/PU, H81EB/EE, H90EG/EB/EP/EF/EC/EE/GC/GN/GJ/PU.
However, the AC Adapter replacement part number is DE-A51CB which should be used when ordering.
However, the AC Adapter replacement part number is DE-A51CB which should be used when ordering.
3. VSK0699 is indicated on AC Adapter used on the following model:
SDR-H80GK, H90GK.
However, the AC Adapter replacement part number is DE-A51DB which should be used when ordering.
However, the AC Adapter replacement part number is DE-A51DB which should be used when ordering.
4. VSK0705 is indicated on AC Adapter used on the following model:
SDR-H80PR.
However, the AC Adapter replacement part number is DE-A51FB which should be used when ordering.
However, the AC Adapter replacement part number is DE-A51FB which should be used when ordering.
Notes 2:
1) This service manual does not contain the following information, because of the impossibility of servicing at component level.
1. Schematic Diagram, Block Diagram and P.C.B. layout of Main P.C.B. and Sub P.C.B.
2. Parts List for individual parts of Main P.C.B. and Sub P.C.B.
2. Parts List for individual parts of Main P.C.B. and Sub P.C.B.
2) The following category are recycle module part. Please send them to Central Repair Center.
*Main P.C.B. (LSEP8462A1: SDR-H80P/PC/PU/PR, H90P/PC/PU)
(LSEP8462P1: SDR-H80EG/EB/EP/EF/EC/EE/GC/GN/GJ/GK, H81EB/EE,
90EG/EB/EP/EF/EC/EE/GC/GN/ GJ/GK)
90EG/EB/EP/EF/EC/EE/GC/GN/ GJ/GK)
*Sub P.C.B. (LSEP8463A1: SDR-H80P/PC/PU/PR)
(LSEP8463B1: SDR-H90P/PC/PU)
(LSEP8463P1: SDR-H80EG/EB/EP/EF/EC/EE/GC/GN/GJ/GK, H81EB)
(LSEP8463Q1: SDR-H81EE)
(LSEP8463R1: SDR-H90EG/EB/EP/EF/EC/EE/GC/GN/GJ/GK)
(LSEP8463P1: SDR-H80EG/EB/EP/EF/EC/EE/GC/GN/GJ/GK, H81EB)
(LSEP8463Q1: SDR-H81EE)
(LSEP8463R1: SDR-H90EG/EB/EP/EF/EC/EE/GC/GN/GJ/GK)
When a part replacement is required for repairing each Main P.C.B. and Sub P.C.B., replace the assembly parts.
(Main P.C.B.)
The following circuits are contained in Main P.C.B.
1. Main Connection Circuit
2. AVIO Circuit
3. Video Circuit
4. Memory Circuit
5. USB Host Circuit
6. LCD Circuit
7. Resize Circuit
8. KAO Circuit
9. Lens Drive Circuit
10. TG/AFE Circuit
11. MIC Circuit
12. Sub Power Circuit
(Main P.C.B.)
The following circuits are contained in Main P.C.B.
1. Main Connection Circuit
2. AVIO Circuit
3. Video Circuit
4. Memory Circuit
5. USB Host Circuit
6. LCD Circuit
7. Resize Circuit
8. KAO Circuit
9. Lens Drive Circuit
10. TG/AFE Circuit
11. MIC Circuit
12. Sub Power Circuit
9
SDR-H80P
Click on the first or last page to see other SDR-H80P / SDR-H80PC / SDR-H80EG / SDR-H80EE / SDR-H80EB / SDR-H80EP / SDR-H80EF / SDR-H80EC / SDR-H80GC / SDR-H80GN / SDR-H80GJ / SDR-H80GK / SDR-H80PU / SDR-H80PR / SDR-H81EE / SDR-H81EB / SDR-H90P / SDR-H90PC / SDR-H90EG / SDR-H90EE / SDR-H90EB / SDR-H service manuals if exist.