DOWNLOAD Panasonic SDR-H100P / SDR-H100PC / SDR-H100EB / SDR-H100EC / SDR-H100EE / SDR-H100EF / SDR-H100EG / SDR-H100EP / SDR-H100GT / SDR-H101EB / SDR-H101PR / SDR-H101PU / SDR-H101GA / SDR-H101GC / SDR-H101GK / SDR-H101GN Service Manual ↓ Size: 3.75 MB | Pages: 73 in PDF or view online for FREE

Model
SDR-H100P SDR-H100PC SDR-H100EB SDR-H100EC SDR-H100EE SDR-H100EF SDR-H100EG SDR-H100EP SDR-H100GT SDR-H101EB SDR-H101PR SDR-H101PU SDR-H101GA SDR-H101GC SDR-H101GK SDR-H101GN
Pages
73
Size
3.75 MB
Type
PDF
Document
Service Manual
Brand
Device
Movie / SD / HDD VIDEO CAMERA
File
sdr-h100p-sdr-h100pc-sdr-h100eb-sdr-h100ec-sdr-h10.pdf
Date

Panasonic SDR-H100P / SDR-H100PC / SDR-H100EB / SDR-H100EC / SDR-H100EE / SDR-H100EF / SDR-H100EG / SDR-H100EP / SDR-H100GT / SDR-H101EB / SDR-H101PR / SDR-H101PU / SDR-H101GA / SDR-H101GC / SDR-H101GK / SDR-H101GN Service Manual ▷ View online

ORDER NO.VM1101003CE
B27
SD / HDD Video Camera
Model No.
SDR-H100P
SDR-H100PC
SDR-H100EB
SDR-H100EC
SDR-H100EE
SDR-H100EF
SDR-H100EG
SDR-H100EP
SDR-H100GT
SDR-H101EB
SDR-H101PR
SDR-H101PU
SDR-H101GA
SDR-H101GC
SDR-H101GK
SDR-H101GN
VOL.1
Colours
(K)........Black Type (except SDR-H101EB)
(S)........Silver Type (only SDR-H100P/PC/GT, H101PU/
GA/GC)
(R)........Red Type (only SDR-H100P/PC/GT,101PU/GA/
GC/GK/GN)
(H)........Gray Type (only SDR-H101EB)
2
TABLE OF CONTENTS
PAGE
PAGE
1 Safety Precautions -----------------------------------------------3
1.1. General Guidelines ----------------------------------------3
2 Warning --------------------------------------------------------------4
2.1. Prevention of Electrostatic Discharge (ESD)
to Electrostatic Sensitive (ES) Devices ---------------4
2.2. Service caution based on legal restrictions----------5
2.3. Caution for AC Cord (For EB/GC/GA) ----------------6
2.4. How to Replace the Lithium Battery
(PROCEDURE)---------------------------------------------7
2.5. How to Recycle the Lithium Battery (U.S.
Only)-----------------------------------------------------------8
3 Service Navigation------------------------------------------------9
3.1. Service Information ----------------------------------------9
3.2. How to Define the Model Suffix (NTSC or PAL
model)------------------------------------------------------- 10
3.3. Precautions for Handling HDD------------------------ 11
3.4. Formatting HDD ------------------------------------------ 15
4 Specifications ---------------------------------------------------- 16
5 Location of Controls and Components------------------ 17
6 Service Mode ----------------------------------------------------- 20
6.1. HDD Self Check ------------------------------------------ 21
6.2. Lock Search History Indication ----------------------- 21
6.3. Power ON Self Check Result Display--------------- 22
6.4. Lock Search History Clear ----------------------------- 22
7 Service Fixture & Tools --------------------------------------- 23
7.1. Service Tools and Equipment ------------------------- 23
8 Disassembly and Assembly Instructions --------------- 24
8.1. Disassembly Flow Chart-------------------------------- 24
8.2. P.C.B. Layout---------------------------------------------- 24
8.3. Disassembly Procedures------------------------------- 25
8.4. Disassembly Procedures of Camera Lens
Unit----------------------------------------------------------- 34
9 Measurements and Adjustments -------------------------- 36
9.1. EEPROM Data for spare parts of the MAIN
P.C.B.-------------------------------------------------------- 36
9.2. Service Positions ----------------------------------------- 36
9.3. Location for Connectors of the Main P.C.B. ------- 38
9.4. Electrical Adjustment ------------------------------------ 39
10 Maintenance ------------------------------------------------------ 41
10.1. Cleaning Lens and LCD Panel ----------------------- 41
11 Factory Setting--------------------------------------------------- 42
11.1. How to turn on the factory setting? ------------------ 42
11.2. What is the factory settings? -------------------------- 43
3
1 Safety Precautions
1.1.
General Guidelines
1. IMPORTANT SAFETY NOTICE
There are special components used in this equipment which are important for safety. These parts are marked by 
in the
Schematic Diagrams, Circuit Board Layout, Exploded Views and Replacement Parts List. It is essential that these critical parts
should be replaced with manufacturer's specified parts to prevent X-RADIATION, shock fire, or other hazards. Do not modify
the original design without permission of manufacturer.
2. An Isolation Transformer should always be used during the servicing of AC Adaptor whose chassis is not isolated from the AC
power line. Use a transformer of adequate power rating as this protects the technician from accidents resulting in personal
injury from electrical shocks. It will also protect AC Adaptor from being damaged by accidental shorting that may occur during
servicing.
3. When servicing, observe the original lead dress. It a short circuit is found, replace all parts which have been overheated or
damaged by the short circuit.
4. After servicing, see to it that all the protective devices such as insulation barriers, insulation papers shields are properly
installed.
5. After servicing, make the following leakage current checks to prevent the customer from being exposed to shock hazards.
1.1.1.
Leakage Current Cold Check
1. Unplug the AC cord and connect a jumper between the two prongs on the plug.
2. Measure the resistance value, with an ohmmeter, between the jumpered AC plug and each exposed metallic cabinet part on
the equipment such as screwheads, connectors, control shafts, etc. When the exposed metallic part has a return path to the
chassis, the reading should be between 1M
Ω and 5.2MΩ. When the exposed metal does not have a return path to the chas-
sis, the reading must be infinity.
1.1.2.
Leakage current hot check (See Figure 1)
1. Plug the AC cord directly into the AC outlet. Do not use
an isolation transformer for this check.
2. Connect "A" to exposed metallic part on the set. And con-
nect "B" to a good earth ground, as shown in Figure 1.
3. Use an AC voltmeter, with 1 k
Ω/V or more sensitivity, to
measure the potential across the resistor. 
4. Check each exposed metallic part, and measure the volt-
age at each point.
5. Reverse the AC plug in the AC outlet and repeat each of
the above measurements.
6. The potential at any point should not exceed 0.25 V RMS.
A leakage current tester (Simpson Model 229 or equiva-
lent) may be used to make the hot checks, leakage cur-
rent must not exceed 1/2 mA. In case a measurement is
outside of the limits specified, there is a possibility of a
shock hazard, and the equipment should be repaired and
rechecked before it is returned to the customer.
Figure 1
4
2 Warning
2.1.
Prevention of Electrostatic Discharge (ESD) to Electrostatic Sensitive
(ES) Devices
Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Elec-
trostatic Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and semi-
conductor "chip" components. The following techniques should be used to help reduce the incidence of component damage caused
by electrostatic discharge (ESD).
1. Immediately before handling any semiconductor component or semiconductor-equipped assembly, drain off any ESD on your
body by touching a known earth ground. Alternatively, obtain and wear a commercially available discharging ESD wrist strap,
which should be removed for potential shock reasons prior to applying power to the unit under test.
2. After removing an electrical assembly equipped with ES devices, place the assembly on a conductive surface such as alumi-
num foil, to prevent electrostatic charge buildup or exposure of the assembly.
3. Use only a grounded-tip soldering iron to solder or unsolder ES devices.
4. Use only an antistatic solder removal device. Some solder removal devices not classified as "antistatic (ESD protected)" can
generate electrical charge sufficient to damage ES devices.
5. Do not use freon-propelled chemicals. These can generate electrical charges sufficient to damage ES devices.
6. Do not remove a replacement ES device from its protective package until immediately before you are ready to install it. (Most
replacement ES devices are packaged with leads electrically shorted together by conductive foam, aluminum foil or compara-
ble conductive material).
7. Immediately before removing the protective material from the leads of a replacement ES device, touch the protective material
to the chassis or circuit assembly into which the device will be installed.
CAUTION:
Be sure no power is applied to the chassis or circuit, and observe all other safety precautions.
8. Minimize bodily motions when handling unpackaged replacement ES devices. (Otherwise harmless motion such as the
brushing together of your clothes fabric or the lifting of your foot from a carpeted floor can generate static electricity (ESD) suf-
ficient to damage an ES device).
Page of 73
Display

Panasonic SDR-H100P / SDR-H100PC / SDR-H100EB / SDR-H100EC / SDR-H100EE / SDR-H100EF / SDR-H100EG / SDR-H100EP / SDR-H100GT / SDR-H101EB / SDR-H101PR / SDR-H101PU / SDR-H101GA / SDR-H101GC / SDR-H101GK / SDR-H101GN Service Manual ▷ Download

  • DOWNLOAD Panasonic SDR-H100P / SDR-H100PC / SDR-H100EB / SDR-H100EC / SDR-H100EE / SDR-H100EF / SDR-H100EG / SDR-H100EP / SDR-H100GT / SDR-H101EB / SDR-H101PR / SDR-H101PU / SDR-H101GA / SDR-H101GC / SDR-H101GK / SDR-H101GN Service Manual ↓ Size: 3.75 MB | Pages: 73 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Panasonic SDR-H100P / SDR-H100PC / SDR-H100EB / SDR-H100EC / SDR-H100EE / SDR-H100EF / SDR-H100EG / SDR-H100EP / SDR-H100GT / SDR-H101EB / SDR-H101PR / SDR-H101PU / SDR-H101GA / SDR-H101GC / SDR-H101GK / SDR-H101GN in PDF for free, which will help you to disassemble, recover, fix and repair Panasonic SDR-H100P / SDR-H100PC / SDR-H100EB / SDR-H100EC / SDR-H100EE / SDR-H100EF / SDR-H100EG / SDR-H100EP / SDR-H100GT / SDR-H101EB / SDR-H101PR / SDR-H101PU / SDR-H101GA / SDR-H101GC / SDR-H101GK / SDR-H101GN Movie. Information contained in Panasonic SDR-H100P / SDR-H100PC / SDR-H100EB / SDR-H100EC / SDR-H100EE / SDR-H100EF / SDR-H100EG / SDR-H100EP / SDR-H100GT / SDR-H101EB / SDR-H101PR / SDR-H101PU / SDR-H101GA / SDR-H101GC / SDR-H101GK / SDR-H101GN Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.