DOWNLOAD Panasonic NV-GS6EE / NV-GS6GC / NV-GS17E / NV-GS17EB / NV-GS17EG / NV-GS17EP / NV-GS18E / NV-GS21E / NV-GS21EB / NV-GS21EG / NV-GS21EK / NV-GS21EP / NV-GS25GC / NV-GS25GCD / NV-GS25GN / NV-GS28GK / NV-GS35E / NV-GS35EB / NV-GS35EG / NV-GS35EP / NV-GS35GC / NV-GS35G Service Manual ↓ Size: 5.77 MB | Pages: 107 in PDF or view online for FREE

Model
NV-GS6EE NV-GS6GC NV-GS17E NV-GS17EB NV-GS17EG NV-GS17EP NV-GS18E NV-GS21E NV-GS21EB NV-GS21EG NV-GS21EK NV-GS21EP NV-GS25GC NV-GS25GCD NV-GS25GN NV-GS28GK NV-GS35E NV-GS35EB NV-GS35EG NV-GS35EP NV-GS35GC NV-GS35G
Pages
107
Size
5.77 MB
Type
PDF
Document
Service Manual
Brand
Device
Movie / DIGITAL VIDEO CAMCORDER
File
nv-gs6ee-nv-gs6gc-nv-gs17e-nv-gs17eb-nv-gs17eg-nv-.pdf
Date

Panasonic NV-GS6EE / NV-GS6GC / NV-GS17E / NV-GS17EB / NV-GS17EG / NV-GS17EP / NV-GS18E / NV-GS21E / NV-GS21EB / NV-GS21EG / NV-GS21EK / NV-GS21EP / NV-GS25GC / NV-GS25GCD / NV-GS25GN / NV-GS28GK / NV-GS35E / NV-GS35EB / NV-GS35EG / NV-GS35EP / NV-GS35GC / NV-GS35G Service Manual ▷ View online

8. Installation of Mechanism Chassis Ass'y
Take care not to damage the F.P.C.s.
1) After installing the Mechanism Chassis Ass'y, confirm
the F.P.C.s are positioned as shown.
Fig. D8-1
Replacement of Mechanism Chassis Ass'y
When replacing the Main Chassis Ass'y or the Cylinder
Unit, be sure to perform the Envelope Output Adjustment.
Refer to "ENVELOPE OUTPUT ADJUSTMENT" in
MECHANICAL ADJUSTMENT.
Handling Caution of Mechanism Chassis Ass'y
When servicing the Mechanism Chassis Ass'y without the
Cassette Up Unit, do not handle the Sub Chassis of the
Mechanism Chassis Ass'y.
Fig. D8-2
Mechanism Chassis Ass'y
Mechanism Chassis Ass'y
(without Cassette Up Unit) 
<Side View>
Sub Chassis
Sub Chassis
Sub Chassis
7. Installation of Main C.B.A.
Take care not to damage the F.P.C.s.
1) Connect the Zoom Switch F.P.C. to the Connector
FP10 on the Main C.B.A.
2) Connect the F.P.C.s to the connectors on the Main
C.B.A, verifying that the direction of the Flexible Cables
is correct. Refer to "REMOVAL/INSTALLATION OF
F.P.C. FROM NON ZIF (Zero Insertion Force)
CONNECTOR."
3) After installing the Main C.B.A., confirm the F.P.C.s are
positioned as shown.
Fig. D7
Sub Mechanism 
F.P.C.
Capstan 
F.P.C.
Zoom
Switch
F.P.C.
Cylinder 
F.P.C.
Head 
Amp 
F.P.C.
Mechanism 
F.P.C.
46
NV-GS6EE NV-GS6GC
11. Removal of Side Case R Unit
Open and rotate the LCD to access the 2 Screws (419, 457)
as shown below, then remove it.
Installation of Side Case R Unit
When installing, pay attention to the direction of the Shaft
Case Unit. So, be sure to install the LCD (Ass'y) into the
Side Case R Unit with the LCD rotate as shown. Otherwise,
the LCD open/close switch on the Side Case R Unit will be
damaged.
Fig. D11
LCD (Ass'y)
Side Case R Unit
Rotate
Rotate
LCD open/close SW.
419
457
Shaft Case Unit
9. Removal of Jack C.B.A. & Bottom Angle Ass'y
1) Open the L Cover.
2) Remove the Screw (450) and release the Tripod Portion
from the hole.
Installation of Jack C.B.A. & Bottom Angle Ass'y
Insert the both of Jack C.B.A. & Bottom Angle Ass'y into the
2 slots and secure the Tripod to the hole.
Fig. D9
10. Installation of Front C.B.A.
1) Install the Four Eye Lens (For model with Light) into
the Front Case. Then, install the Front C.B.A. with 2
bosses of the Four Eye Lens and 2 Screws (533).
2) Install the Light Shield Sheet with 2 Screws (533).
Fig. D10
Jack C.B.A. & 
Bottom Angle Ass'y
Tripod
slot
slot
Open L Cover
hole
450
Front 
C.B.A.
Light Shield Sheet
boss (For model with Light)
boss (For model with Light)
Four Eyes Lens
(For model with Light)
Front Case
533
533
533
533
47
NV-GS6EE NV-GS6GC
12. Installation of LCD C.B.A., LCD Panel Ass'y, LCD Shield
Case Unit, LCD Case B
Use extreme care the LEDs when handling the LCD C.B.A.
Install in order shown below.
1) Install the LCD Panel Ass'y onto the LCD Shield Case
Unit with the 3 Locking Tabs (L-4) while bending at the
base of the LCD F.P.C. so as not to damage it.
2) Install them into the LCD Case B with the 4 Locking
Tabs (L-3).
3) Install the LCD C.B.A. onto the LCD Panel Ass'y with
the Locking Tab (L-2).
4) Tighten the Screw (542) while keeping the LCD C.B.A.
pressed toward the right. Then, connect the Connector
FP8102.
Fig. D12
boss
LCD
Shield 
Case 
Unit
LCD Panel Ass'y
LCD 
F.P.C.
LCD C.B.A.
LCD Case B
(L-3)
(L-3)
(L-3)
(L-4)
(L-4)
(L-3)
(L-2)
FP8102
Press
Bend
542
48
NV-GS6EE NV-GS6GC
13. Installation of LCD Panel, Reflect Sheet, Lead Light
Panel, Diffusion Sheet, BEF Sheet, BEF Sheet A, Panel
Holder Unit
a. When replacing the LCD Panel, the Diffusion Sheet,
the BEF Sheet and the BEF Sheet A, make sure to
remove the Protection Sheets.
To distinguish the sheets with Protection Sheet
attached:
- A blue Protection Sheet is affixed to both faces of the
Diffusion Sheet.
- A yellow Protection Sheet is affixed to both faces of
the BEF Sheet.
- A transparent Protection Sheet is affixed to both
faces of the BEF Sheet A.
b. Use extreme care when handling the LCD Panel, the
Reflect Sheet, the Lead Light Panel, the Diffusion
Sheet, the BEF Sheet and the BEF Sheet A to avoid
damage, dust, and spots (especially fingerprints, etc.)
Install in order shown below.
1) Install the BEF Sheet A, BEF Sheet and Diffusion Sheet
while inserting the corners of the sheets to the slots of
the Panel Holder Unit in order.
2) Install the Lead Light Panel while inserting the corners
to the slots of the Panel Holder Unit.
3) Align the Reflect Sheet with the edge of the Panel
Holder Unit, and install it using adhesive tape on the
Reflect Sheet.
Fig. D13-1
4) Install the LCD Panel with adhesive tape so that the
cross marks are positioned in the center of the holes of
the Panel Holder Unit.
BEF Sheet A
BEF Sheet
(yellow)
(blue)
(green)
Diffusion Sheet
Protection Sheet
Protection Sheet
Protection Sheet
Reflect Sheet
Do not touch 
the surface of 
Lead Light Panel.
Panel Holder Unit
adhesive 
tape
Fig. D13-2
(stripe)
BEF Sheet A
Panel Holder Unit
(L-5)
LCD Panel
Lead Light Panel
Reflect Sheet
adhesive 
tape
adhesive 
tape
adhesive 
tape
View A
View A
cross mark
cross mark
hole of Panel 
Holder Unit
hole of Panel 
Holder Unit
cross mark
cross mark
slot
hole
hole
slot
BEF Sheet
Diffusion Sheet
(white)
(gray)
49
NV-GS6EE NV-GS6GC
Page of 107
Display

Click on the first or last page to see other NV-GS6EE / NV-GS6GC / NV-GS17E / NV-GS17EB / NV-GS17EG / NV-GS17EP / NV-GS18E / NV-GS21E / NV-GS21EB / NV-GS21EG / NV-GS21EK / NV-GS21EP / NV-GS25GC / NV-GS25GCD / NV-GS25GN / NV-GS28GK / NV-GS35E / NV-GS35EB / NV-GS35EG / NV-GS35EP / NV-GS35GC / NV-GS35G service manuals if exist.